This is an automated email from the ASF dual-hosted git repository.
davsclaus pushed a commit to branch main
in repository https://gitbox.apache.org/repos/asf/camel-examples.git
The following commit(s) were added to refs/heads/main by this push:
new 51d84722 Upgrade maven wrapper 3.9.11 with: mvn wrapper:wrapper
-Dtype=bin -Dmaven=3.9.11
51d84722 is described below
commit 51d84722797e7ed9ac30662bc1093a4e0c27ea57
Author: Claus Ibsen <[email protected]>
AuthorDate: Tue Nov 25 07:10:18 2025 +0100
Upgrade maven wrapper 3.9.11 with: mvn wrapper:wrapper -Dtype=bin
-Dmaven=3.9.11
---
.mvn/wrapper/maven-wrapper.jar | Bin 0 -> 63093 bytes
.mvn/wrapper/maven-wrapper.properties | 23 +-
mvnw | 447 ++++++++++++++++++++--------------
mvnw.cmd | 305 +++++++++++++----------
4 files changed, 448 insertions(+), 327 deletions(-)
diff --git a/.mvn/wrapper/maven-wrapper.jar b/.mvn/wrapper/maven-wrapper.jar
new file mode 100644
index 00000000..eebc3c18
Binary files /dev/null and b/.mvn/wrapper/maven-wrapper.jar differ
diff --git a/.mvn/wrapper/maven-wrapper.properties
b/.mvn/wrapper/maven-wrapper.properties
index d58dfb70..ec95f42f 100644
--- a/.mvn/wrapper/maven-wrapper.properties
+++ b/.mvn/wrapper/maven-wrapper.properties
@@ -1,19 +1,4 @@
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-wrapperVersion=3.3.2
-distributionType=only-script
-distributionUrl=https://repo.maven.apache.org/maven2/org/apache/maven/apache-maven/3.9.9/apache-maven-3.9.9-bin.zip
+wrapperVersion=3.3.4
+distributionType=bin
+distributionUrl=https://repo.maven.apache.org/maven2/org/apache/maven/apache-maven/3.9.11/apache-maven-3.9.11-bin.zip
+wrapperUrl=https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.3.4/maven-wrapper-3.3.4.jar
diff --git a/mvnw b/mvnw
index 19529ddf..1ddd97b9 100755
--- a/mvnw
+++ b/mvnw
@@ -19,84 +19,188 @@
# ----------------------------------------------------------------------------
# ----------------------------------------------------------------------------
-# Apache Maven Wrapper startup batch script, version 3.3.2
+# Apache Maven Wrapper startup batch script, version 3.3.4
+#
+# Required ENV vars:
+# ------------------
+# JAVA_HOME - location of a JDK home dir
#
# Optional ENV vars
# -----------------
-# JAVA_HOME - location of a JDK home dir, required when download maven via
java source
-# MVNW_REPOURL - repo url base for downloading maven distribution
-# MVNW_USERNAME/MVNW_PASSWORD - user and password for downloading maven
-# MVNW_VERBOSE - true: enable verbose log; debug: trace the mvnw script;
others: silence the output
+# MAVEN_OPTS - parameters passed to the Java VM when running Maven
+# e.g. to debug Maven itself, use
+# set MAVEN_OPTS=-Xdebug
-Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000
+# MAVEN_SKIP_RC - flag to disable loading of mavenrc files
# ----------------------------------------------------------------------------
-set -euf
-[ "${MVNW_VERBOSE-}" != debug ] || set -x
+if [ -z "$MAVEN_SKIP_RC" ]; then
+
+ if [ -f /usr/local/etc/mavenrc ]; then
+ . /usr/local/etc/mavenrc
+ fi
+
+ if [ -f /etc/mavenrc ]; then
+ . /etc/mavenrc
+ fi
-# OS specific support.
-native_path() { printf %s\\n "$1"; }
+ if [ -f "$HOME/.mavenrc" ]; then
+ . "$HOME/.mavenrc"
+ fi
+
+fi
+
+# OS specific support. $var _must_ be set to either true or false.
+cygwin=false
+darwin=false
+mingw=false
case "$(uname)" in
-CYGWIN* | MINGW*)
- [ -z "${JAVA_HOME-}" ] || JAVA_HOME="$(cygpath --unix "$JAVA_HOME")"
- native_path() { cygpath --path --windows "$1"; }
+CYGWIN*) cygwin=true ;;
+MINGW*) mingw=true ;;
+Darwin*)
+ darwin=true
+ # Use /usr/libexec/java_home if available, otherwise fall back to
/Library/Java/Home
+ # See https://developer.apple.com/library/mac/qa/qa1170/_index.html
+ if [ -z "$JAVA_HOME" ]; then
+ if [ -x "/usr/libexec/java_home" ]; then
+ JAVA_HOME="$(/usr/libexec/java_home)"
+ export JAVA_HOME
+ else
+ JAVA_HOME="/Library/Java/Home"
+ export JAVA_HOME
+ fi
+ fi
;;
esac
-# set JAVACMD and JAVACCMD
-set_java_home() {
- # For Cygwin and MinGW, ensure paths are in Unix format before anything is
touched
- if [ -n "${JAVA_HOME-}" ]; then
+if [ -z "$JAVA_HOME" ]; then
+ if [ -r /etc/gentoo-release ]; then
+ JAVA_HOME=$(java-config --jre-home)
+ fi
+fi
+
+# For Cygwin, ensure paths are in UNIX format before anything is touched
+if $cygwin; then
+ [ -n "$JAVA_HOME" ] \
+ && JAVA_HOME=$(cygpath --unix "$JAVA_HOME")
+ [ -n "$CLASSPATH" ] \
+ && CLASSPATH=$(cygpath --path --unix "$CLASSPATH")
+fi
+
+# For Mingw, ensure paths are in UNIX format before anything is touched
+if $mingw; then
+ [ -n "$JAVA_HOME" ] && [ -d "$JAVA_HOME" ] \
+ && JAVA_HOME="$(
+ cd "$JAVA_HOME" || (
+ echo "cannot cd into $JAVA_HOME." >&2
+ exit 1
+ )
+ pwd
+ )"
+fi
+
+if [ -z "$JAVA_HOME" ]; then
+ javaExecutable="$(which javac)"
+ if [ -n "$javaExecutable" ] && ! [ "$(expr "$javaExecutable" : '\([^ ]*\)')"
= "no" ]; then
+ # readlink(1) is not available as standard on Solaris 10.
+ readLink=$(which readlink)
+ if [ ! "$(expr "$readLink" : '\([^ ]*\)')" = "no" ]; then
+ if $darwin; then
+ javaHome="$(dirname "$javaExecutable")"
+ javaExecutable="$(cd "$javaHome" && pwd -P)/javac"
+ else
+ javaExecutable="$(readlink -f "$javaExecutable")"
+ fi
+ javaHome="$(dirname "$javaExecutable")"
+ javaHome=$(expr "$javaHome" : '\(.*\)/bin')
+ JAVA_HOME="$javaHome"
+ export JAVA_HOME
+ fi
+ fi
+fi
+
+if [ -z "$JAVACMD" ]; then
+ if [ -n "$JAVA_HOME" ]; then
if [ -x "$JAVA_HOME/jre/sh/java" ]; then
# IBM's JDK on AIX uses strange locations for the executables
JAVACMD="$JAVA_HOME/jre/sh/java"
- JAVACCMD="$JAVA_HOME/jre/sh/javac"
else
JAVACMD="$JAVA_HOME/bin/java"
- JAVACCMD="$JAVA_HOME/bin/javac"
-
- if [ ! -x "$JAVACMD" ] || [ ! -x "$JAVACCMD" ]; then
- echo "The JAVA_HOME environment variable is not defined correctly, so
mvnw cannot run." >&2
- echo "JAVA_HOME is set to \"$JAVA_HOME\", but \"\$JAVA_HOME/bin/java\"
or \"\$JAVA_HOME/bin/javac\" does not exist." >&2
- return 1
- fi
fi
else
JAVACMD="$(
- 'set' +e
- 'unset' -f command 2>/dev/null
- 'command' -v java
- )" || :
- JAVACCMD="$(
- 'set' +e
- 'unset' -f command 2>/dev/null
- 'command' -v javac
- )" || :
+ \unset -f command 2>/dev/null
+ \command -v java
+ )"
+ fi
+fi
- if [ ! -x "${JAVACMD-}" ] || [ ! -x "${JAVACCMD-}" ]; then
- echo "The java/javac command does not exist in PATH nor is JAVA_HOME
set, so mvnw cannot run." >&2
- return 1
- fi
+if [ ! -x "$JAVACMD" ]; then
+ echo "Error: JAVA_HOME is not defined correctly." >&2
+ echo " We cannot execute $JAVACMD" >&2
+ exit 1
+fi
+
+if [ -z "$JAVA_HOME" ]; then
+ echo "Warning: JAVA_HOME environment variable is not set." >&2
+fi
+
+# traverses directory structure from process work directory to filesystem root
+# first directory with .mvn subdirectory is considered project base directory
+find_maven_basedir() {
+ if [ -z "$1" ]; then
+ echo "Path not specified to find_maven_basedir" >&2
+ return 1
fi
-}
-# hash string like Java String::hashCode
-hash_string() {
- str="${1:-}" h=0
- while [ -n "$str" ]; do
- char="${str%"${str#?}"}"
- h=$(((h * 31 + $(LC_CTYPE=C printf %d "'$char")) % 4294967296))
- str="${str#?}"
+ basedir="$1"
+ wdir="$1"
+ while [ "$wdir" != '/' ]; do
+ if [ -d "$wdir"/.mvn ]; then
+ basedir=$wdir
+ break
+ fi
+ # workaround for JBEAP-8937 (on Solaris 10/Sparc)
+ if [ -d "${wdir}" ]; then
+ wdir=$(
+ cd "$wdir/.." || exit 1
+ pwd
+ )
+ fi
+ # end of workaround
done
- printf %x\\n $h
+ printf '%s' "$(
+ cd "$basedir" || exit 1
+ pwd
+ )"
}
-verbose() { :; }
-[ "${MVNW_VERBOSE-}" != true ] || verbose() { printf %s\\n "${1-}"; }
+# concatenates all lines of a file
+concat_lines() {
+ if [ -f "$1" ]; then
+ # Remove \r in case we run on Windows within Git Bash
+ # and check out the repository with auto CRLF management
+ # enabled. Otherwise, we may read lines that are delimited with
+ # \r\n and produce $'-Xarg\r' rather than -Xarg due to word
+ # splitting rules.
+ tr -s '\r\n' ' ' <"$1"
+ fi
+}
-die() {
- printf %s\\n "$1" >&2
- exit 1
+log() {
+ if [ "$MVNW_VERBOSE" = true ]; then
+ printf '%s\n' "$1"
+ fi
}
+BASE_DIR=$(find_maven_basedir "$(dirname "$0")")
+if [ -z "$BASE_DIR" ]; then
+ exit 1
+fi
+
+MAVEN_PROJECTBASEDIR=${MAVEN_BASEDIR:-"$BASE_DIR"}
+export MAVEN_PROJECTBASEDIR
+log "$MAVEN_PROJECTBASEDIR"
+
trim() {
# MWRAPPER-139:
# Trims trailing and leading whitespace, carriage returns, tabs, and
linefeeds.
@@ -105,155 +209,130 @@ trim() {
printf "%s" "${1}" | tr -d '[:space:]'
}
-# parse distributionUrl and optional distributionSha256Sum, requires
.mvn/wrapper/maven-wrapper.properties
-while IFS="=" read -r key value; do
- case "${key-}" in
- distributionUrl) distributionUrl=$(trim "${value-}") ;;
- distributionSha256Sum) distributionSha256Sum=$(trim "${value-}") ;;
- esac
-done <"${0%/*}/.mvn/wrapper/maven-wrapper.properties"
-[ -n "${distributionUrl-}" ] || die "cannot read distributionUrl property in
${0%/*}/.mvn/wrapper/maven-wrapper.properties"
-
-case "${distributionUrl##*/}" in
-maven-mvnd-*bin.*)
- MVN_CMD=mvnd.sh _MVNW_REPO_PATTERN=/maven/mvnd/
- case "${PROCESSOR_ARCHITECTURE-}${PROCESSOR_ARCHITEW6432-}:$(uname -a)" in
- *AMD64:CYGWIN* | *AMD64:MINGW*) distributionPlatform=windows-amd64 ;;
- :Darwin*x86_64) distributionPlatform=darwin-amd64 ;;
- :Darwin*arm64) distributionPlatform=darwin-aarch64 ;;
- :Linux*x86_64*) distributionPlatform=linux-amd64 ;;
- *)
- echo "Cannot detect native platform for mvnd on $(uname)-$(uname -m), use
pure java version" >&2
- distributionPlatform=linux-amd64
- ;;
- esac
- distributionUrl="${distributionUrl%-bin.*}-$distributionPlatform.zip"
- ;;
-maven-mvnd-*) MVN_CMD=mvnd.sh _MVNW_REPO_PATTERN=/maven/mvnd/ ;;
-*) MVN_CMD="mvn${0##*/mvnw}" _MVNW_REPO_PATTERN=/org/apache/maven/ ;;
-esac
-
-# apply MVNW_REPOURL and calculate MAVEN_HOME
-# maven home pattern:
~/.m2/wrapper/dists/{apache-maven-<version>,maven-mvnd-<version>-<platform>}/<hash>
-[ -z "${MVNW_REPOURL-}" ] ||
distributionUrl="$MVNW_REPOURL$_MVNW_REPO_PATTERN${distributionUrl#*"$_MVNW_REPO_PATTERN"}"
-distributionUrlName="${distributionUrl##*/}"
-distributionUrlNameMain="${distributionUrlName%.*}"
-distributionUrlNameMain="${distributionUrlNameMain%-bin}"
-MAVEN_USER_HOME="${MAVEN_USER_HOME:-${HOME}/.m2}"
-MAVEN_HOME="${MAVEN_USER_HOME}/wrapper/dists/${distributionUrlNameMain-}/$(hash_string
"$distributionUrl")"
-
-exec_maven() {
- unset MVNW_VERBOSE MVNW_USERNAME MVNW_PASSWORD MVNW_REPOURL || :
- exec "$MAVEN_HOME/bin/$MVN_CMD" "$@" || die "cannot exec
$MAVEN_HOME/bin/$MVN_CMD"
-}
-
-if [ -d "$MAVEN_HOME" ]; then
- verbose "found existing MAVEN_HOME at $MAVEN_HOME"
- exec_maven "$@"
-fi
-
-case "${distributionUrl-}" in
-*?-bin.zip | *?maven-mvnd-?*-?*.zip) ;;
-*) die "distributionUrl is not valid, must match *-bin.zip or
maven-mvnd-*.zip, but found '${distributionUrl-}'" ;;
-esac
-
-# prepare tmp dir
-if TMP_DOWNLOAD_DIR="$(mktemp -d)" && [ -d "$TMP_DOWNLOAD_DIR" ]; then
- clean() { rm -rf -- "$TMP_DOWNLOAD_DIR"; }
- trap clean HUP INT TERM EXIT
+##########################################################################################
+# Extension to allow automatically downloading the maven-wrapper.jar from
Maven-central
+# This allows using the maven wrapper in projects that prohibit checking in
binary data.
+##########################################################################################
+wrapperJarPath="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.jar"
+if [ -r "$wrapperJarPath" ]; then
+ log "Found $wrapperJarPath"
else
- die "cannot create temp dir"
-fi
+ log "Couldn't find $wrapperJarPath, downloading it ..."
-mkdir -p -- "${MAVEN_HOME%/*}"
-
-# Download and Install Apache Maven
-verbose "Couldn't find MAVEN_HOME, downloading and installing it ..."
-verbose "Downloading from: $distributionUrl"
-verbose "Downloading to: $TMP_DOWNLOAD_DIR/$distributionUrlName"
-
-# select .zip or .tar.gz
-if ! command -v unzip >/dev/null; then
- distributionUrl="${distributionUrl%.zip}.tar.gz"
- distributionUrlName="${distributionUrl##*/}"
-fi
-
-# verbose opt
-__MVNW_QUIET_WGET=--quiet __MVNW_QUIET_CURL=--silent __MVNW_QUIET_UNZIP=-q
__MVNW_QUIET_TAR=''
-[ "${MVNW_VERBOSE-}" != true ] || __MVNW_QUIET_WGET='' __MVNW_QUIET_CURL=''
__MVNW_QUIET_UNZIP='' __MVNW_QUIET_TAR=v
+ if [ -n "$MVNW_REPOURL" ]; then
+
wrapperUrl="$MVNW_REPOURL/org/apache/maven/wrapper/maven-wrapper/3.3.4/maven-wrapper-3.3.4.jar"
+ else
+
wrapperUrl="https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.3.4/maven-wrapper-3.3.4.jar";
+ fi
+ while IFS="=" read -r key value; do
+ case "$key" in wrapperUrl)
+ wrapperUrl=$(trim "${value-}")
+ break
+ ;;
+ esac
+ done <"$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.properties"
+ log "Downloading from: $wrapperUrl"
-# normalize http auth
-case "${MVNW_PASSWORD:+has-password}" in
-'') MVNW_USERNAME='' MVNW_PASSWORD='' ;;
-has-password) [ -n "${MVNW_USERNAME-}" ] || MVNW_USERNAME='' MVNW_PASSWORD=''
;;
-esac
+ if $cygwin; then
+ wrapperJarPath=$(cygpath --path --windows "$wrapperJarPath")
+ fi
-if [ -z "${MVNW_USERNAME-}" ] && command -v wget >/dev/null; then
- verbose "Found wget ... using wget"
- wget ${__MVNW_QUIET_WGET:+"$__MVNW_QUIET_WGET"} "$distributionUrl" -O
"$TMP_DOWNLOAD_DIR/$distributionUrlName" || die "wget: Failed to fetch
$distributionUrl"
-elif [ -z "${MVNW_USERNAME-}" ] && command -v curl >/dev/null; then
- verbose "Found curl ... using curl"
- curl ${__MVNW_QUIET_CURL:+"$__MVNW_QUIET_CURL"} -f -L -o
"$TMP_DOWNLOAD_DIR/$distributionUrlName" "$distributionUrl" || die "curl:
Failed to fetch $distributionUrl"
-elif set_java_home; then
- verbose "Falling back to use Java to download"
- javaSource="$TMP_DOWNLOAD_DIR/Downloader.java"
- targetZip="$TMP_DOWNLOAD_DIR/$distributionUrlName"
- cat >"$javaSource" <<-END
- public class Downloader extends java.net.Authenticator
- {
- protected java.net.PasswordAuthentication getPasswordAuthentication()
- {
- return new java.net.PasswordAuthentication( System.getenv(
"MVNW_USERNAME" ), System.getenv( "MVNW_PASSWORD" ).toCharArray() );
- }
- public static void main( String[] args ) throws Exception
- {
- setDefault( new Downloader() );
- java.nio.file.Files.copy( java.net.URI.create( args[0]
).toURL().openStream(), java.nio.file.Paths.get( args[1]
).toAbsolutePath().normalize() );
- }
- }
- END
- # For Cygwin/MinGW, switch paths to Windows format before running javac and
java
- verbose " - Compiling Downloader.java ..."
- "$(native_path "$JAVACCMD")" "$(native_path "$javaSource")" || die "Failed
to compile Downloader.java"
- verbose " - Running Downloader.java ..."
- "$(native_path "$JAVACMD")" -cp "$(native_path "$TMP_DOWNLOAD_DIR")"
Downloader "$distributionUrl" "$(native_path "$targetZip")"
+ if command -v wget >/dev/null; then
+ log "Found wget ... using wget"
+ [ "$MVNW_VERBOSE" = true ] && QUIET="" || QUIET="--quiet"
+ if [ -z "$MVNW_USERNAME" ] || [ -z "$MVNW_PASSWORD" ]; then
+ wget ${QUIET:+"$QUIET"} "$wrapperUrl" -O "$wrapperJarPath" || rm -f
"$wrapperJarPath"
+ else
+ wget ${QUIET:+"$QUIET"} --http-user="$MVNW_USERNAME"
--http-password="$MVNW_PASSWORD" "$wrapperUrl" -O "$wrapperJarPath" || rm -f
"$wrapperJarPath"
+ fi
+ elif command -v curl >/dev/null; then
+ log "Found curl ... using curl"
+ [ "$MVNW_VERBOSE" = true ] && QUIET="" || QUIET="--silent"
+ if [ -z "$MVNW_USERNAME" ] || [ -z "$MVNW_PASSWORD" ]; then
+ curl ${QUIET:+"$QUIET"} -o "$wrapperJarPath" "$wrapperUrl" -f -L || rm
-f "$wrapperJarPath"
+ else
+ curl ${QUIET:+"$QUIET"} --user "$MVNW_USERNAME:$MVNW_PASSWORD" -o
"$wrapperJarPath" "$wrapperUrl" -f -L || rm -f "$wrapperJarPath"
+ fi
+ else
+ log "Falling back to using Java to download"
+ javaSource="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/MavenWrapperDownloader.java"
+ javaClass="$MAVEN_PROJECTBASEDIR/.mvn/wrapper/MavenWrapperDownloader.class"
+ # For Cygwin, switch paths to Windows format before running javac
+ if $cygwin; then
+ javaSource=$(cygpath --path --windows "$javaSource")
+ javaClass=$(cygpath --path --windows "$javaClass")
+ fi
+ if [ -e "$javaSource" ]; then
+ if [ ! -e "$javaClass" ]; then
+ log " - Compiling MavenWrapperDownloader.java ..."
+ ("$JAVA_HOME/bin/javac" "$javaSource")
+ fi
+ if [ -e "$javaClass" ]; then
+ log " - Running MavenWrapperDownloader.java ..."
+ ("$JAVA_HOME/bin/java" -cp .mvn/wrapper MavenWrapperDownloader
"$wrapperUrl" "$wrapperJarPath") || rm -f "$wrapperJarPath"
+ fi
+ fi
+ fi
fi
+##########################################################################################
+# End of extension
+##########################################################################################
-# If specified, validate the SHA-256 sum of the Maven distribution zip file
-if [ -n "${distributionSha256Sum-}" ]; then
- distributionSha256Result=false
- if [ "$MVN_CMD" = mvnd.sh ]; then
- echo "Checksum validation is not supported for maven-mvnd." >&2
- echo "Please disable validation by removing 'distributionSha256Sum' from
your maven-wrapper.properties." >&2
- exit 1
- elif command -v sha256sum >/dev/null; then
- if echo "$distributionSha256Sum $TMP_DOWNLOAD_DIR/$distributionUrlName" |
sha256sum -c >/dev/null 2>&1; then
- distributionSha256Result=true
+# If specified, validate the SHA-256 sum of the Maven wrapper jar file
+wrapperSha256Sum=""
+while IFS="=" read -r key value; do
+ case "$key" in wrapperSha256Sum)
+ wrapperSha256Sum=$(trim "${value-}")
+ break
+ ;;
+ esac
+done <"$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.properties"
+if [ -n "$wrapperSha256Sum" ]; then
+ wrapperSha256Result=false
+ if command -v sha256sum >/dev/null; then
+ if echo "$wrapperSha256Sum $wrapperJarPath" | sha256sum -c - >/dev/null
2>&1; then
+ wrapperSha256Result=true
fi
elif command -v shasum >/dev/null; then
- if echo "$distributionSha256Sum $TMP_DOWNLOAD_DIR/$distributionUrlName" |
shasum -a 256 -c >/dev/null 2>&1; then
- distributionSha256Result=true
+ if echo "$wrapperSha256Sum $wrapperJarPath" | shasum -a 256 -c >/dev/null
2>&1; then
+ wrapperSha256Result=true
fi
else
echo "Checksum validation was requested but neither 'sha256sum' or
'shasum' are available." >&2
- echo "Please install either command, or disable validation by removing
'distributionSha256Sum' from your maven-wrapper.properties." >&2
+ echo "Please install either command, or disable validation by removing
'wrapperSha256Sum' from your maven-wrapper.properties." >&2
exit 1
fi
- if [ $distributionSha256Result = false ]; then
- echo "Error: Failed to validate Maven distribution SHA-256, your Maven
distribution might be compromised." >&2
- echo "If you updated your Maven version, you need to update the specified
distributionSha256Sum property." >&2
+ if [ $wrapperSha256Result = false ]; then
+ echo "Error: Failed to validate Maven wrapper SHA-256, your Maven wrapper
might be compromised." >&2
+ echo "Investigate or delete $wrapperJarPath to attempt a clean download."
>&2
+ echo "If you updated your Maven version, you need to update the specified
wrapperSha256Sum property." >&2
exit 1
fi
fi
-# unzip and move
-if command -v unzip >/dev/null; then
- unzip ${__MVNW_QUIET_UNZIP:+"$__MVNW_QUIET_UNZIP"}
"$TMP_DOWNLOAD_DIR/$distributionUrlName" -d "$TMP_DOWNLOAD_DIR" || die "failed
to unzip"
-else
- tar xzf${__MVNW_QUIET_TAR:+"$__MVNW_QUIET_TAR"}
"$TMP_DOWNLOAD_DIR/$distributionUrlName" -C "$TMP_DOWNLOAD_DIR" || die "failed
to untar"
+MAVEN_OPTS="$(concat_lines "$MAVEN_PROJECTBASEDIR/.mvn/jvm.config")
$MAVEN_OPTS"
+
+# For Cygwin, switch paths to Windows format before running java
+if $cygwin; then
+ [ -n "$JAVA_HOME" ] \
+ && JAVA_HOME=$(cygpath --path --windows "$JAVA_HOME")
+ [ -n "$CLASSPATH" ] \
+ && CLASSPATH=$(cygpath --path --windows "$CLASSPATH")
+ [ -n "$MAVEN_PROJECTBASEDIR" ] \
+ && MAVEN_PROJECTBASEDIR=$(cygpath --path --windows "$MAVEN_PROJECTBASEDIR")
fi
-printf %s\\n "$distributionUrl"
>"$TMP_DOWNLOAD_DIR/$distributionUrlNameMain/mvnw.url"
-mv -- "$TMP_DOWNLOAD_DIR/$distributionUrlNameMain" "$MAVEN_HOME" || [ -d
"$MAVEN_HOME" ] || die "fail to move MAVEN_HOME"
-clean || :
-exec_maven "$@"
+# Provide a "standardized" way to retrieve the CLI args that will
+# work with both Windows and non-Windows executions.
+MAVEN_CMD_LINE_ARGS="$MAVEN_CONFIG $*"
+export MAVEN_CMD_LINE_ARGS
+
+WRAPPER_LAUNCHER=org.apache.maven.wrapper.MavenWrapperMain
+
+# shellcheck disable=SC2086 # safe args
+exec "$JAVACMD" \
+ $MAVEN_OPTS \
+ $MAVEN_DEBUG_OPTS \
+ -classpath "$MAVEN_PROJECTBASEDIR/.mvn/wrapper/maven-wrapper.jar" \
+ "-Dmaven.multiModuleProjectDirectory=${MAVEN_PROJECTBASEDIR}" \
+ ${WRAPPER_LAUNCHER} $MAVEN_CONFIG "$@"
diff --git a/mvnw.cmd b/mvnw.cmd
index 249bdf38..8366e217 100644
--- a/mvnw.cmd
+++ b/mvnw.cmd
@@ -1,4 +1,3 @@
-<# : batch portion
@REM
----------------------------------------------------------------------------
@REM Licensed to the Apache Software Foundation (ASF) under one
@REM or more contributor license agreements. See the NOTICE file
@@ -19,131 +18,189 @@
@REM
----------------------------------------------------------------------------
@REM
----------------------------------------------------------------------------
-@REM Apache Maven Wrapper startup batch script, version 3.3.2
+@REM Apache Maven Wrapper startup batch script, version 3.3.4
+@REM
+@REM Required ENV vars:
+@REM JAVA_HOME - location of a JDK home dir
@REM
@REM Optional ENV vars
-@REM MVNW_REPOURL - repo url base for downloading maven distribution
-@REM MVNW_USERNAME/MVNW_PASSWORD - user and password for downloading maven
-@REM MVNW_VERBOSE - true: enable verbose log; others: silence the output
+@REM MAVEN_BATCH_ECHO - set to 'on' to enable the echoing of the batch commands
+@REM MAVEN_BATCH_PAUSE - set to 'on' to wait for a keystroke before ending
+@REM MAVEN_OPTS - parameters passed to the Java VM when running Maven
+@REM e.g. to debug Maven itself, use
+@REM set MAVEN_OPTS=-Xdebug
-Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000
+@REM MAVEN_SKIP_RC - flag to disable loading of mavenrc files
@REM
----------------------------------------------------------------------------
-@IF "%__MVNW_ARG0_NAME__%"=="" (SET __MVNW_ARG0_NAME__=%~nx0)
-@SET __MVNW_CMD__=
-@SET __MVNW_ERROR__=
-@SET __MVNW_PSMODULEP_SAVE=%PSModulePath%
-@SET PSModulePath=
-@FOR /F "usebackq tokens=1* delims==" %%A IN (`powershell -noprofile "&
{$scriptDir='%~dp0'; $script='%__MVNW_ARG0_NAME__%'; icm -ScriptBlock
([Scriptblock]::Create((Get-Content -Raw '%~f0'))) -NoNewScope}"`) DO @(
- IF "%%A"=="MVN_CMD" (set __MVNW_CMD__=%%B) ELSE IF "%%B"=="" (echo %%A) ELSE
(echo %%A=%%B)
+@REM Begin all REM lines with '@' in case MAVEN_BATCH_ECHO is 'on'
+@echo off
+@REM set title of command window
+title %0
+@REM enable echoing by setting MAVEN_BATCH_ECHO to 'on'
+@if "%MAVEN_BATCH_ECHO%" == "on" echo %MAVEN_BATCH_ECHO%
+
+@REM set %HOME% to equivalent of $HOME
+if "%HOME%" == "" (set "HOME=%HOMEDRIVE%%HOMEPATH%")
+
+@REM Execute a user defined script before this one
+if not "%MAVEN_SKIP_RC%" == "" goto skipRcPre
+@REM check for pre script, once with legacy .bat ending and once with .cmd
ending
+if exist "%USERPROFILE%\mavenrc_pre.bat" call "%USERPROFILE%\mavenrc_pre.bat"
%*
+if exist "%USERPROFILE%\mavenrc_pre.cmd" call "%USERPROFILE%\mavenrc_pre.cmd"
%*
+:skipRcPre
+
+@setlocal
+
+set ERROR_CODE=0
+
+@REM To isolate internal variables from possible post scripts, we use another
setlocal
+@setlocal
+
+@REM ==== START VALIDATION ====
+if not "%JAVA_HOME%" == "" goto OkJHome
+
+echo. >&2
+echo Error: JAVA_HOME not found in your environment. >&2
+echo Please set the JAVA_HOME variable in your environment to match the >&2
+echo location of your Java installation. >&2
+echo. >&2
+goto error
+
+:OkJHome
+if exist "%JAVA_HOME%\bin\java.exe" goto init
+
+echo. >&2
+echo Error: JAVA_HOME is set to an invalid directory. >&2
+echo JAVA_HOME = "%JAVA_HOME%" >&2
+echo Please set the JAVA_HOME variable in your environment to match the >&2
+echo location of your Java installation. >&2
+echo. >&2
+goto error
+
+@REM ==== END VALIDATION ====
+
+:init
+
+@REM Find the project base dir, i.e. the directory that contains the folder
".mvn".
+@REM Fallback to current working directory if not found.
+
+set MAVEN_PROJECTBASEDIR=%MAVEN_BASEDIR%
+IF NOT "%MAVEN_PROJECTBASEDIR%"=="" goto endDetectBaseDir
+
+set EXEC_DIR=%CD%
+set WDIR=%EXEC_DIR%
+:findBaseDir
+IF EXIST "%WDIR%"\.mvn goto baseDirFound
+cd ..
+IF "%WDIR%"=="%CD%" goto baseDirNotFound
+set WDIR=%CD%
+goto findBaseDir
+
+:baseDirFound
+set MAVEN_PROJECTBASEDIR=%WDIR%
+cd "%EXEC_DIR%"
+goto endDetectBaseDir
+
+:baseDirNotFound
+set MAVEN_PROJECTBASEDIR=%EXEC_DIR%
+cd "%EXEC_DIR%"
+
+:endDetectBaseDir
+
+IF NOT EXIST "%MAVEN_PROJECTBASEDIR%\.mvn\jvm.config" goto
endReadAdditionalConfig
+
+@setlocal EnableExtensions EnableDelayedExpansion
+for /F "usebackq delims=" %%a in ("%MAVEN_PROJECTBASEDIR%\.mvn\jvm.config") do
set JVM_CONFIG_MAVEN_PROPS=!JVM_CONFIG_MAVEN_PROPS! %%a
+@endlocal & set JVM_CONFIG_MAVEN_PROPS=%JVM_CONFIG_MAVEN_PROPS%
+
+:endReadAdditionalConfig
+
+SET MAVEN_JAVA_EXE="%JAVA_HOME%\bin\java.exe"
+set WRAPPER_JAR="%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.jar"
+set WRAPPER_LAUNCHER=org.apache.maven.wrapper.MavenWrapperMain
+
+set
WRAPPER_URL="https://repo.maven.apache.org/maven2/org/apache/maven/wrapper/maven-wrapper/3.3.4/maven-wrapper-3.3.4.jar";
+
+FOR /F "usebackq tokens=1,2 delims==" %%A IN
("%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.properties") DO (
+ IF "%%A"=="wrapperUrl" SET WRAPPER_URL=%%B
+)
+
+@REM Extension to allow automatically downloading the maven-wrapper.jar from
Maven-central
+@REM This allows using the maven wrapper in projects that prohibit checking in
binary data.
+if exist %WRAPPER_JAR% (
+ if "%MVNW_VERBOSE%" == "true" (
+ echo Found %WRAPPER_JAR%
+ )
+) else (
+ if not "%MVNW_REPOURL%" == "" (
+ SET
WRAPPER_URL="%MVNW_REPOURL%/org/apache/maven/wrapper/maven-wrapper/3.3.4/maven-wrapper-3.3.4.jar"
+ )
+ if "%MVNW_VERBOSE%" == "true" (
+ echo Couldn't find %WRAPPER_JAR%, downloading it ...
+ echo Downloading from: %WRAPPER_URL%
+ )
+
+ powershell -Command "&{"^
+ "$webclient = new-object System.Net.WebClient;"^
+ "if (-not ([string]::IsNullOrEmpty('%MVNW_USERNAME%') -and
[string]::IsNullOrEmpty('%MVNW_PASSWORD%'))) {"^
+ "$webclient.Credentials = new-object
System.Net.NetworkCredential('%MVNW_USERNAME%', '%MVNW_PASSWORD%');"^
+ "}"^
+ "[Net.ServicePointManager]::SecurityProtocol =
[Net.SecurityProtocolType]::Tls12; $webclient.DownloadFile('%WRAPPER_URL%',
'%WRAPPER_JAR%')"^
+ "}"
+ if "%MVNW_VERBOSE%" == "true" (
+ echo Finished downloading %WRAPPER_JAR%
+ )
+)
+@REM End of extension
+
+@REM If specified, validate the SHA-256 sum of the Maven wrapper jar file
+SET WRAPPER_SHA_256_SUM=""
+FOR /F "usebackq tokens=1,2 delims==" %%A IN
("%MAVEN_PROJECTBASEDIR%\.mvn\wrapper\maven-wrapper.properties") DO (
+ IF "%%A"=="wrapperSha256Sum" SET WRAPPER_SHA_256_SUM=%%B
)
-@SET PSModulePath=%__MVNW_PSMODULEP_SAVE%
-@SET __MVNW_PSMODULEP_SAVE=
-@SET __MVNW_ARG0_NAME__=
-@SET MVNW_USERNAME=
-@SET MVNW_PASSWORD=
-@IF NOT "%__MVNW_CMD__%"=="" (%__MVNW_CMD__% %*)
-@echo Cannot start maven from wrapper >&2 && exit /b 1
-@GOTO :EOF
-: end batch / begin powershell #>
-
-$ErrorActionPreference = "Stop"
-if ($env:MVNW_VERBOSE -eq "true") {
- $VerbosePreference = "Continue"
-}
-
-# calculate distributionUrl, requires .mvn/wrapper/maven-wrapper.properties
-$distributionUrl = (Get-Content -Raw
"$scriptDir/.mvn/wrapper/maven-wrapper.properties" |
ConvertFrom-StringData).distributionUrl
-if (!$distributionUrl) {
- Write-Error "cannot read distributionUrl property in
$scriptDir/.mvn/wrapper/maven-wrapper.properties"
-}
-
-switch -wildcard -casesensitive ( $($distributionUrl -replace '^.*/','') ) {
- "maven-mvnd-*" {
- $USE_MVND = $true
- $distributionUrl = $distributionUrl -replace
'-bin\.[^.]*$',"-windows-amd64.zip"
- $MVN_CMD = "mvnd.cmd"
- break
- }
- default {
- $USE_MVND = $false
- $MVN_CMD = $script -replace '^mvnw','mvn'
- break
- }
-}
-
-# apply MVNW_REPOURL and calculate MAVEN_HOME
-# maven home pattern:
~/.m2/wrapper/dists/{apache-maven-<version>,maven-mvnd-<version>-<platform>}/<hash>
-if ($env:MVNW_REPOURL) {
- $MVNW_REPO_PATTERN = if ($USE_MVND) { "/org/apache/maven/" } else {
"/maven/mvnd/" }
- $distributionUrl = "$env:MVNW_REPOURL$MVNW_REPO_PATTERN$($distributionUrl
-replace '^.*'+$MVNW_REPO_PATTERN,'')"
-}
-$distributionUrlName = $distributionUrl -replace '^.*/',''
-$distributionUrlNameMain = $distributionUrlName -replace '\.[^.]*$',''
-replace '-bin$',''
-$MAVEN_HOME_PARENT = "$HOME/.m2/wrapper/dists/$distributionUrlNameMain"
-if ($env:MAVEN_USER_HOME) {
- $MAVEN_HOME_PARENT =
"$env:MAVEN_USER_HOME/wrapper/dists/$distributionUrlNameMain"
-}
-$MAVEN_HOME_NAME =
([System.Security.Cryptography.MD5]::Create().ComputeHash([byte[]][char[]]$distributionUrl)
| ForEach-Object {$_.ToString("x2")}) -join ''
-$MAVEN_HOME = "$MAVEN_HOME_PARENT/$MAVEN_HOME_NAME"
-
-if (Test-Path -Path "$MAVEN_HOME" -PathType Container) {
- Write-Verbose "found existing MAVEN_HOME at $MAVEN_HOME"
- Write-Output "MVN_CMD=$MAVEN_HOME/bin/$MVN_CMD"
- exit $?
-}
-
-if (! $distributionUrlNameMain -or ($distributionUrlName -eq
$distributionUrlNameMain)) {
- Write-Error "distributionUrl is not valid, must end with *-bin.zip, but
found $distributionUrl"
-}
-
-# prepare tmp dir
-$TMP_DOWNLOAD_DIR_HOLDER = New-TemporaryFile
-$TMP_DOWNLOAD_DIR = New-Item -Itemtype Directory -Path
"$TMP_DOWNLOAD_DIR_HOLDER.dir"
-$TMP_DOWNLOAD_DIR_HOLDER.Delete() | Out-Null
-trap {
- if ($TMP_DOWNLOAD_DIR.Exists) {
- try { Remove-Item $TMP_DOWNLOAD_DIR -Recurse -Force | Out-Null }
- catch { Write-Warning "Cannot remove $TMP_DOWNLOAD_DIR" }
- }
-}
-
-New-Item -Itemtype Directory -Path "$MAVEN_HOME_PARENT" -Force | Out-Null
-
-# Download and Install Apache Maven
-Write-Verbose "Couldn't find MAVEN_HOME, downloading and installing it ..."
-Write-Verbose "Downloading from: $distributionUrl"
-Write-Verbose "Downloading to: $TMP_DOWNLOAD_DIR/$distributionUrlName"
-
-$webclient = New-Object System.Net.WebClient
-if ($env:MVNW_USERNAME -and $env:MVNW_PASSWORD) {
- $webclient.Credentials = New-Object
System.Net.NetworkCredential($env:MVNW_USERNAME, $env:MVNW_PASSWORD)
-}
-[Net.ServicePointManager]::SecurityProtocol = [Net.SecurityProtocolType]::Tls12
-$webclient.DownloadFile($distributionUrl,
"$TMP_DOWNLOAD_DIR/$distributionUrlName") | Out-Null
-
-# If specified, validate the SHA-256 sum of the Maven distribution zip file
-$distributionSha256Sum = (Get-Content -Raw
"$scriptDir/.mvn/wrapper/maven-wrapper.properties" |
ConvertFrom-StringData).distributionSha256Sum
-if ($distributionSha256Sum) {
- if ($USE_MVND) {
- Write-Error "Checksum validation is not supported for maven-mvnd. `nPlease
disable validation by removing 'distributionSha256Sum' from your
maven-wrapper.properties."
- }
- Import-Module $PSHOME\Modules\Microsoft.PowerShell.Utility -Function
Get-FileHash
- if ((Get-FileHash "$TMP_DOWNLOAD_DIR/$distributionUrlName" -Algorithm
SHA256).Hash.ToLower() -ne $distributionSha256Sum) {
- Write-Error "Error: Failed to validate Maven distribution SHA-256, your
Maven distribution might be compromised. If you updated your Maven version, you
need to update the specified distributionSha256Sum property."
- }
-}
-
-# unzip and move
-Expand-Archive "$TMP_DOWNLOAD_DIR/$distributionUrlName" -DestinationPath
"$TMP_DOWNLOAD_DIR" | Out-Null
-Rename-Item -Path "$TMP_DOWNLOAD_DIR/$distributionUrlNameMain" -NewName
$MAVEN_HOME_NAME | Out-Null
-try {
- Move-Item -Path "$TMP_DOWNLOAD_DIR/$MAVEN_HOME_NAME" -Destination
$MAVEN_HOME_PARENT | Out-Null
-} catch {
- if (! (Test-Path -Path "$MAVEN_HOME" -PathType Container)) {
- Write-Error "fail to move MAVEN_HOME"
- }
-} finally {
- try { Remove-Item $TMP_DOWNLOAD_DIR -Recurse -Force | Out-Null }
- catch { Write-Warning "Cannot remove $TMP_DOWNLOAD_DIR" }
-}
-
-Write-Output "MVN_CMD=$MAVEN_HOME/bin/$MVN_CMD"
+IF NOT %WRAPPER_SHA_256_SUM%=="" (
+ powershell -Command "&{"^
+ "Import-Module $PSHOME\Modules\Microsoft.PowerShell.Utility -Function
Get-FileHash;"^
+ "$hash = (Get-FileHash \"%WRAPPER_JAR%\" -Algorithm
SHA256).Hash.ToLower();"^
+ "If('%WRAPPER_SHA_256_SUM%' -ne $hash){"^
+ " Write-Error 'Error: Failed to validate Maven wrapper SHA-256, your
Maven wrapper might be compromised.';"^
+ " Write-Error 'Investigate or delete %WRAPPER_JAR% to attempt a clean
download.';"^
+ " Write-Error 'If you updated your Maven version, you need to update
the specified wrapperSha256Sum property.';"^
+ " exit 1;"^
+ "}"^
+ "}"
+ if ERRORLEVEL 1 goto error
+)
+
+@REM Provide a "standardized" way to retrieve the CLI args that will
+@REM work with both Windows and non-Windows executions.
+set MAVEN_CMD_LINE_ARGS=%*
+
+%MAVEN_JAVA_EXE% ^
+ %JVM_CONFIG_MAVEN_PROPS% ^
+ %MAVEN_OPTS% ^
+ %MAVEN_DEBUG_OPTS% ^
+ -classpath %WRAPPER_JAR% ^
+ "-Dmaven.multiModuleProjectDirectory=%MAVEN_PROJECTBASEDIR%" ^
+ %WRAPPER_LAUNCHER% %MAVEN_CONFIG% %*
+if ERRORLEVEL 1 goto error
+goto end
+
+:error
+set ERROR_CODE=1
+
+:end
+@endlocal & set ERROR_CODE=%ERROR_CODE%
+
+if not "%MAVEN_SKIP_RC%"=="" goto skipRcPost
+@REM check for post script, once with legacy .bat ending and once with .cmd
ending
+if exist "%USERPROFILE%\mavenrc_post.bat" call "%USERPROFILE%\mavenrc_post.bat"
+if exist "%USERPROFILE%\mavenrc_post.cmd" call "%USERPROFILE%\mavenrc_post.cmd"
+:skipRcPost
+
+@REM pause the script if MAVEN_BATCH_PAUSE is set to 'on'
+if "%MAVEN_BATCH_PAUSE%"=="on" pause
+
+if "%MAVEN_TERMINATE_CMD%"=="on" exit %ERROR_CODE%
+
+cmd /C exit /B %ERROR_CODE%
