The software you're running is fine. I don't think Cisco would sell an 8 port Gig switch with software that doesn't support GBIC. We have a few of those switches in our environment running the same software and they work fine. How are you trunking the ports? What are you connecting the ports to, one port to your distribution layer switch and the other ports straight into servers?
Audy ""Ismail Al-Shelh"" wrote in message news:[EMAIL PROTECTED].; > Hello all > I have Catalyst 3508G XL , 8 GBIC slots , 12.0(5.2)XU IOS software. We > tried to make operate it but the GBIC was not blinking at all , as I had > read this document > http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/1000gbic/instnot > e.htm , I got conclusion that the switches detect and enable the GBIC only > when they are running the minimum software releases which in case of > Catalyst 3508G XL Cisco the minimum IOS Release is 12.0(5)XW , so in order > to enable the GBIC we have to upgrade the IOS software from 12.0(5.2)XU to > 12.0(5)XW . > any comment please !!! > Al-shelh > Network Engineer. > > [GroupStudy.com removed an attachment of type application/ms-tnef] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37158&t=37154 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
