I have a 1601 router and a 2509 to practice with. I've connected them with a DCE/DTE cable off the s0 ports on each router and set a clock rate on the DCE end, the 1601. On Sundays I can use a fiber connection with this setup. I have this coming in the e0 on the 1601. The E0 on the 2509 is crossover cabled to a PC.
10Mbps in at switch(10.140.240.1/30) ------- (10.140.240.2/30) e0-1601 / s0-1601(172.16.96.1/30) ------- (172.16.96.2/30)s0-2509 / e0-2509(10.140.240.161/27) -------- (10.140.240.162/27)PC 10.140.240.160 is my inside network My problem seems to be a lack of bandwidth to the PC end. At speed test sites on the net I'm only getting about 1.6 Mbps. I think I may be bottlenecked somewhere in the router back to back setup. The configs are close to what they were originally set up as to keep my boss happy in case he needs one in a hurry. I've changed the addresses to similar types of networks but private numbers. The ethernet ports are ARPA and the serial ports HDLC. I've set bandwidth to 10000Kbps at each port. I originally had the clock rate at 64000 but didn't know if that was a bottleneck. ------------------------------------------------------------------------ ---------- Router1601#sh run Current configuration: ! version 11.2 (not enough memory to upgrade) service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname 1601 ! boot system flash enable secret 5 xxxxxxxxxxxxxxxx enable password 7 xxxxxxxxxxxxxxxx ! ip subnet-zero clock timezone PST -8 clock summer-time pdt recurring ! interface Ethernet0 description E0 10Mbps connection to Fiber ip address 10.140.240.2 255.255.255.252 media-type 10BaseT no cdp enable ! interface Serial0 description S0 to 2509 S0 ip address 172.16.96.1 255.255.255.252 bandwidth 10000 clockrate 4000000 ! no ip classless ip route 0.0.0.0 0.0.0.0 64.240.140.1 ip route 10.140.240.160 255.255.255.224 172.16.96.2 logging buffered 4096 debugging snmp-server community xxxxxxxx RO ! snip Banner stuff ! end ------------------------------------------------------------------------ ---------------- Router2509#sh run Current configuration : 2227 bytes ! version 12.1 no service single-slot-reload-enable service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone service password-encryption service udp-small-servers service tcp-small-servers ! hostname Router2509 ! boot system flash enable password 7 xxxxxxxxxxxxxxxx ! ! clock timezone PST -8 clock summer-time pdt recurring ip subnet-zero ! interface Ethernet0 description to LAN ip address 10.140.240.161 255.255.255.224 ! interface Serial0 bandwidth 10000 ip address 172.16.96.2 255.255.255.252 no fair-queue ! interface Serial1 no ip address shutdown ! no ip classless ip route 0.0.0.0 0.0.0.0 172.16.96.1 ip route 10.140.240.160 255.255.255.224 10.140.240.162 no ip http server ! end Any ideas? ....................................................................... ............... PC Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73897&t=73897 -------------------------------------------------- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
