Hey all,
We have a NPE-G1 which is shutting down not long after boot.
...from boot log...
*Voltage readings:
+3.45 V measured at +3.47 V
+5.15 V measured at +5.25 V
+12.15 V measured at +12.29 V
-11.95 V is unmeasured*
Initially all voltage readings are unmeasured. It goes through them one by
one - we have a dump of this process.
As soon as it measures the last voltage reading, the unit initiates a self
shutdown.
**Jan 1 00:00:51.447: %ENVM-0-SHUT: Environmental Monitor initiated
shutdown*
*
*
Anyone know what the Voltage readings relate to and what this might be?
I have tried Google and the Cisco site without luck.
*
*
*Skeeve Stevens, CEO - *eintellego Pty Ltd
[email protected] ; www.eintellego.net
Phone: 1300 753 383; Cell +61 (0)414 753 383 ; skype://skeeve
facebook.com/eintellego ; <http://twitter.com/networkceoau>
linkedin.com/in/skeeve
twitter.com/networkceoau ; blog: www.network-ceo.net
The Experts Who The Experts Call
Juniper - Cisco – IBM
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
