I have a 3800ME with the following configuration below: I am trying to set up Port Mirror from gig0/13 to gig0/3- I type in commands and they take, yet nothing shows up when I do a sh monitor session 1--Would it be because of the Service Instance or what?
Here is what I type for the monitor session- (config)#monitor session 1 source interface gig0/13 both (config)#monitor session 1 destination interface gig0/3 interface GigabitEthernet0/1 description "CV11920 Uplink To 2924" switchport trunk allowed vlan none switchport mode trunk mtu 1600 service instance 113 ethernet encapsulation dot1q 113 xconnect 192.168.204.x 10113 encapsulation mpls ! service instance 200 ethernet encapsulation dot1q 200 rewrite ingress tag pop 1 symmetric bridge-domain 200 ! service instance 513 ethernet encapsulation dot1q 513 xconnect 192.168.204.x 10513 encapsulation mpls ! ! interface GigabitEthernet0/2 description "CV13668 Okeene wireless Backhaul" switchport trunk allowed vlan none switchport mode trunk mtu 1600 service instance 208 ethernet encapsulation dot1q 208 rewrite ingress tag pop 1 symmetric bridge-domain 208 ! service instance 474 ethernet encapsulation dot1q 474 xconnect 192.168.204.x 10474 encapsulation mpls ! ! interface GigabitEthernet0/3 ! interface GigabitEthernet0/4 ! interface GigabitEthernet0/5 ! interface GigabitEthernet0/6 ! interface GigabitEthernet0/7 ! interface GigabitEthernet0/8 ! interface GigabitEthernet0/9 ! interface GigabitEthernet0/10 ! interface GigabitEthernet0/11 ! interface GigabitEthernet0/12 ! interface GigabitEthernet0/13 description "CV11777 Mpeg 4 Multicast" switchport trunk allowed vlan none switchport mode trunk service instance 54 ethernet encapsulation dot1q 54 rewrite ingress tag pop 1 symmetric bridge-domain 54 ! Thanks, Judith Sanders Pioneer Telephone Inside Plant Networking Services [email protected] "Our lives change when our habits change." Matthew Kelly *************************** This email message and any files transmitted with it are intended solely for the use of the individual or entity for whom it is addressed. It may contain confidential and privileged information. If you are not the intended recipient, please contact the sender and destroy all paper and electronic copies of this message and its contents. Any unauthorized review, use, disclosure or distribution of this email or any file attachments is strictly prohibited. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
