I have this code... event manager applet A-EU-UP event track 10 state up action 1.0 syslog msg "Track 10 Up. Houston we don't have a problem" action 2.0 cli command "enable" action 3.0 cli command "conf t" action 4.0 cli command "<some commands here>"
I tried to execute... # event manager run A-EU-UP Embedded Event Manager policy EU-ACEL-BACKUP-OFF not registered with event none Event Detector What is the reason for that message? Looks like the EEM code is not running. As far as I can read at documentation found with google, I need "event none" at the beginning of the applet, but, what is the reason for it? When "event none" must be used? _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
