Hi,

Ceph uses other ports also for other daemons like OSD and MDS. Please
refer to

http://docs.ceph.com/docs/jewel/rados/configuration/network-config-ref/

This might help you to resolve the issue.

Thanks.

Daleep Singh Bais

On 10/07/2016 10:14 AM, Jaemyoun Lee wrote:
> Dear Laizer,
>
> Oh, I got it. the rbd was created successfully after I disabled the
> firewall.
> However, when the firewall is enabled and the 6789 port is allowed,
> the authentication error is occurred.
>
> Is there any other port?
>
> On Fri, Oct 7, 2016 at 1:23 PM Lomayani S. Laizer <[email protected]
> <mailto:[email protected]>> wrote:
>
>     Hello Lee,
>     Yes check can be firewall. Make sure port used by ceph are open
>
>     --
>     Lomayani
>
>     On Fri, Oct 7, 2016 at 6:44 AM, Jaemyoun Lee
>     <[email protected] <mailto:[email protected]>> wrote:
>
>         Dear Laizer,
>
>         I did deploy the configuration and the key by '$ ceph-deploy
>         admin client-node' on admin-node.
>             jae@client-node$ ls /etc/ceph
>             ceph.client.admin.keyring  ceph.conf  rbdmap  tmpoWLFTb
>
>
>
>
>         On Fri, Oct 7, 2016 at 12:33 PM Lomayani S. Laizer
>         <[email protected] <mailto:[email protected]>> wrote:
>
>             Hello Lee,
>             Make sure you have copied configuration and key for
>             authentication (ceph.client.admin.keyring) to client node.
>             Looks it is an authentication issue due to missing client key
>
>
>             --
>             Lomayani
>
>             On Fri, Oct 7, 2016 at 5:25 AM, Jaemyoun Lee
>             <[email protected] <mailto:[email protected]>>
>             wrote:
>
>                 Hi, 
>                 I would like to create a rbd on client-node.
>
>                 I created a cluster on admin-node successfully.
>                     jae@admin-node$ ceph health
>                     HEALTH_OK
>
>                 A rbd was created on admin-node successfully.
>                     jae@admin-node$ rbd created foo --size 1024
>
>
>                 However, when I created a rbd on client-node, the
>                 error was occurred:
>                     jae@client-node$ rbd create foo --size 1024
>                     2016-10-06 05:15:35.773242 7f3a52f367c0  0
>                 monclient(hunting): authenticate timed out after 300
>                     2016-10-06 05:15:35.775497 7f3a52f367c0  0
>                 librados: client.admin authentication error (110)
>                 Connection timed out
>
>                 I guess the firewall is right because I can connect
>                 from client-node to admin-node by ssh.
>
>                 May you talk me what is wrong?
>
>                 I referred the following
>                 site: http://docs.ceph.com/docs/master/start/quick-rbd/
>
>                 Best regards,
>                 Jae
>
>                 
> ------------------------------------------------------------------------
>
>
>                 위 전자우편에 포함된 정보는 지정된 수신인에게만 발송되
>                 는 것으로 보안을 유지해야 하는 정보와 법률상 및 기타
>                 사유로 공개가 금지된 정보가 포함돼 있을 수 있습니다.
>
>                 귀하가 이 전자우편의 지정 수신인이 아니라면 본 메일에
>                 포함된 정보의 전부 또는 일부를 무단으로 보유, 사용하거
>                 나 제3자에게 공개, 복사, 전송, 배포해서는 안 됩니다.
>
>                 본 메일이 잘못 전송되었다면, 전자우편 혹은 전화로 연락
>                 해주시고, 메일을 즉시 삭제해 주시기 바랍니다. 협조해
>                 주셔서 감사합니다.
>
>
>                 This e-mail is intended only for the named recipient.
>
>                 Dissemination, distribution, forwarding, or copying of
>                 this e-mail by anyone other than the intended
>                 recipient is prohibited.
>
>                 If you have received it in error, please notify the
>                 sender by e-mail and completely delete it. Thank you
>                 for your cooperation.
>
>                 
> ------------------------------------------------------------------------
>
>
>                 _______________________________________________
>                 ceph-users mailing list
>                 [email protected]
>                 <mailto:[email protected]>
>                 http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com
>
>
>
>         
> ------------------------------------------------------------------------
>
>
>         위 전자우편에 포함된 정보는 지정된 수신인에게만 발송되는 것으
>         로 보안을 유지해야 하는 정보와 법률상 및 기타 사유로 공개가 금
>         지된 정보가 포함돼 있을 수 있습니다.
>
>         귀하가 이 전자우편의 지정 수신인이 아니라면 본 메일에 포함된
>         정보의 전부 또는 일부를 무단으로 보유, 사용하거나 제3자에게 공
>         개, 복사, 전송, 배포해서는 안 됩니다.
>
>         본 메일이 잘못 전송되었다면, 전자우편 혹은 전화로 연락해주시
>         고, 메일을 즉시 삭제해 주시기 바랍니다. 협조해 주셔서 감사합니다.
>
>
>         This e-mail is intended only for the named recipient.
>
>         Dissemination, distribution, forwarding, or copying of this
>         e-mail by anyone other than the intended recipient is prohibited.
>
>         If you have received it in error, please notify the sender by
>         e-mail and completely delete it. Thank you for your cooperation.
>
>         
> ------------------------------------------------------------------------
>
>
>
> ------------------------------------------------------------------------
>
>
> 위 전자우편에 포함된 정보는 지정된 수신인에게만 발송되는 것으로 보안을
> 유지해야 하는 정보와 법률상 및 기타 사유로 공개가 금지된 정보가 포함돼
> 있을 수 있습니다.
>
> 귀하가 이 전자우편의 지정 수신인이 아니라면 본 메일에 포함된 정보의 전
> 부 또는 일부를 무단으로 보유, 사용하거나 제3자에게 공개, 복사, 전송,
> 배포해서는 안 됩니다.
>
> 본 메일이 잘못 전송되었다면, 전자우편 혹은 전화로 연락해주시고, 메일을
> 즉시 삭제해 주시기 바랍니다. 협조해 주셔서 감사합니다.
>
>
> This e-mail is intended only for the named recipient.
>
> Dissemination, distribution, forwarding, or copying of this e-mail by
> anyone other than the intended recipient is prohibited.
>
> If you have received it in error, please notify the sender by e-mail
> and completely delete it. Thank you for your cooperation.
>
> ------------------------------------------------------------------------
>
>
>
> _______________________________________________
> ceph-users mailing list
> [email protected]
> http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

_______________________________________________
ceph-users mailing list
[email protected]
http://lists.ceph.com/listinfo.cgi/ceph-users-ceph.com

Reply via email to