On Wed, Sep 10, 2025 at 10:34 AM Robert Sander
<[email protected]> wrote:
>
> Am 9/10/25 um 10:27 schrieb Robert Sander:
>
> > So there must be a slight difference in the config of the subsystems /
> > namespaces between v19 and v20.
>
> After removing both namespaces (RBD ns01 and ns02) from the old
> subsystem and adding them again the initiator sees them:
>
> # nvme list
> Node Generic SN Model
> Namespace Usage Format
> FW Rev
> --------------------- --------------------- --------------------
> ---------------------------------------- ----------
> -------------------------- ---------------- --------
> /dev/nvme1n1 /dev/ng1n1 Ceph30844860597194 Ceph bdev
> Controller 0x1 107.37 GB / 107.37 GB 512 B
> + 0 B 25.05
> /dev/nvme1n2 /dev/ng1n2 Ceph30844860597194 Ceph bdev
> Controller 0x2 214.75 GB / 214.75 GB 512 B
> + 0 B 25.05
> /dev/nvme5n1 /dev/ng5n1 Ceph44670645393042 Ceph bdev
> Controller 0x1 161.06 GB / 161.06 GB 512 B
> + 0 B 25.05
>
> # lsblk
> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
> sda 8:0 0 60G 0 disk
> ├─sda1 8:1 0 1G 0 part /boot/efi
> ├─sda2 8:2 0 2G 0 part /boot
> └─sda3 8:3 0 56.9G 0 part
> ├─system-swap 252:0 0 100M 0 lvm [SWAP]
> └─system-root 252:1 0 56.8G 0 lvm /var/lib/containers/storage/overlay
> /
> sr0 11:0 1 4M 0 rom
> nvme1n1 259:4 0 100G 0 disk
> └─nvme1n1p1 259:5 0 100G 0 part
> nvme5n1 259:9 0 150G 0 disk
> nvme1n2 259:14 0 200G 0 disk
> └─nvme1n2p1 259:16 0 200G 0 part
Hi Robert,
I'm forwarding some questions on behalf of Aviv as the reproduction
attempt wasn't fruitful:
- Were you using quay.ceph.io/ceph-ci/ceph:squid-nvmeof container image
before upgrading from squid to tentacle?
- If so, what GW version was deployed? Was it 1.4.21?
- Can you provide the output of "nvme-gw show" command?
- Can you provide ceph-mon log from the leader monitor/node?
- Can you provide some GW logs?
Thanks,
Ilya
_______________________________________________
ceph-users mailing list -- [email protected]
To unsubscribe send an email to [email protected]
