Hi Gilles, Yes, your configuration works with Netplan on Ubuntu 18 as well. However, this would use only one of the physical interfaces (the current active interface for the bond) for both networks.
The reason I want to create two bonds is to have enp179s0f0 as active for the public network, and enp179s0f1 as active for the cluster network, therefore spreading the traffic across the nics. Regards, James. > On 31 Mar 2020, at 18:33, Gilles Mocellin <[email protected]> > wrote: > > Hello, > > I don't use netplan, and still on Ubuntu 16.04. > But I use VLAN? on the bond, not directly on the interfaces : > > bond0 : > - enp179s0f0 > - enp179s0f1 > > Then I use bond0.323 and bond0.324. > > (I use a bridge on top to be more like my OpenStack cluster, and with more > friendly names : br-mgmt, br-storage, br-replic...) > > > Le 31/03/2020 à 15:32, James McEwan a écrit : >> Hi, >> >> I am currently building a 10 node Ceph cluster, each OSD node has 2x 25 >> Gbit/s nics, and I have 2 TOR switches (mlag not supported). >> enp179s0f0 -> sw1 >> enp179s0f1 -> sw2 >> >> vlan 323 is used for ‘public network’ >> vlan 324 is used for ‘cluster network’ >> >> My desired configuration is to create two bond interfaces in active-backup >> mode: >> bond0 >> - enp179s0f0.323 (active) >> - enp179s0f1.323 (backup) >> bond1 >> - enp179s0f0.324 (backup) >> - enp179s0f1.324 (active) >> >> This way, the public network will use switch1, and the cluster network will >> use switch2, under normal operation. >> >> I am, however, having an issue implementing this configuration in Ubuntu >> 18.04 with netplan (see configuration at the end of this post). >> >> When I reboot a node with the below netplan configuration, the bond >> interface is created, but the vlan interfaces are not added to the bond. >> >> I see the following errors in the log: >> systemd-networkd[1641]: enp179s0f0.323: Enslaving by 'bond0’ >> systemd-networkd[1641]: bond0: Enslaving link 'enp179s0f0.323’ >> systemd-networkd[1641]: enp179s0f1.323: Enslaving by 'bond0’ >> systemd-networkd[1641]: bond0: Enslaving link 'enp179s0f1.323’ >> systemd-networkd[1643]: enp179s0f1.323: Could not join netdev: Operation not >> permitted >> systemd-networkd[1643]: enp179s0f1.323: Failed >> systemd-networkd[1643]: enp179s0f0.323: Could not join netdev: Operation not >> permitted >> systemd-networkd[1643]: enp179s0f0.323: Failed >> >> If I manually run ’systemctl restart systemd-networkd’ after boot has >> completed, then the bond is successfully created with the vlan interfaces. >> >> Does anybody have a similar configuration working specifically with >> netplan/networkd? Could you please share your configuration? >> >> Netplan config that doesn’t work at boot time: >> >> network: >> version: 2 >> renderer: networkd >> ethernets: >> enp179s0f0: {} >> enp179s0f1: {} >> >> bonds: >> bond0: >> dhcp4: false >> dhcp6: false >> interfaces: >> - enp179s0f0.323 >> - enp179s0f1.323 >> parameters: >> mode: active-backup >> primary: enp179s0f0.323 >> mii-monitor-interval: 1 >> addresses: [insert address here] >> bond1: >> dhcp4: false >> dhcp6: false >> interfaces: >> - enp179s0f0.324 >> - enp179s0f1.324 >> parameters: >> mode: active-backup >> primary: enp179s0f1.324 >> mii-monitor-interval: 1 >> addresses: [insert address here] >> >> vlans: >> enp179s0f0.323: >> id: 323 >> link: enp179s0f0 >> enp179s0f1.323: >> id: 323 >> link: enp179s0f1 >> enp179s0f0.324: >> id: 324 >> link: enp179s0f0 >> enp179s0f1.324: >> id: 324 >> link: enp179s0f1 >> >> _______________________________________________ >> ceph-users mailing list -- [email protected] >> To unsubscribe send an email to [email protected] > _______________________________________________ > ceph-users mailing list -- [email protected] > To unsubscribe send an email to [email protected] _______________________________________________ ceph-users mailing list -- [email protected] To unsubscribe send an email to [email protected]
