Am 19.08.2015 um 22:16 schrieb Somnath Roy:
Alexandre,
I am not able to build librados/librbd by using the following config option.
./configure –without-tcmalloc –with-jemalloc
Same issue to me. You have to remove libcmalloc out of your build
environment to get this done.
Stefan
It seems it is building osd/mon/Mds/RGW with jemalloc enabled..
root@emsnode10:~/ceph-latest/src# ldd ./ceph-osd
linux-vdso.so.1 => (0x00007ffd0eb43000)
libjemalloc.so.1 => /usr/lib/x86_64-linux-gnu/libjemalloc.so.1
(0x00007f5f92d70000)
.......
root@emsnode10:~/ceph-latest/src/.libs# ldd ./librados.so.2.0.0
linux-vdso.so.1 => (0x00007ffed46f2000)
libboost_thread.so.1.55.0 =>
/usr/lib/x86_64-linux-gnu/libboost_thread.so.1.55.0 (0x00007ff687887000)
liblttng-ust.so.0 => /usr/lib/x86_64-linux-gnu/liblttng-ust.so.0
(0x00007ff68763d000)
libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007ff687438000)
libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0
(0x00007ff68721a000)
libnss3.so => /usr/lib/x86_64-linux-gnu/libnss3.so (0x00007ff686ee0000)
libsmime3.so => /usr/lib/x86_64-linux-gnu/libsmime3.so
(0x00007ff686cb3000)
libnspr4.so => /usr/lib/x86_64-linux-gnu/libnspr4.so
(0x00007ff686a76000)
libuuid.so.1 => /lib/x86_64-linux-gnu/libuuid.so.1 (0x00007ff686871000)
librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007ff686668000)
libboost_system.so.1.55.0 =>
/usr/lib/x86_64-linux-gnu/libboost_system.so.1.55.0 (0x00007ff686464000)
libstdc++.so.6 => /usr/lib/x86_64-linux-gnu/libstdc++.so.6
(0x00007ff686160000)
libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007ff685e59000)
libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007ff685a94000)
libgcc_s.so.1 => /lib/x86_64-linux-gnu/libgcc_s.so.1
(0x00007ff68587e000)
liblttng-ust-tracepoint.so.0 =>
/usr/lib/x86_64-linux-gnu/liblttng-ust-tracepoint.so.0 (0x00007ff685663000)
liburcu-bp.so.1 => /usr/lib/liburcu-bp.so.1 (0x00007ff68545c000)
liburcu-cds.so.1 => /usr/lib/liburcu-cds.so.1 (0x00007ff685255000)
/lib64/ld-linux-x86-64.so.2 (0x00007ff68a0f6000)
libnssutil3.so => /usr/lib/x86_64-linux-gnu/libnssutil3.so
(0x00007ff685029000)
libplc4.so => /usr/lib/x86_64-linux-gnu/libplc4.so (0x00007ff684e24000)
libplds4.so => /usr/lib/x86_64-linux-gnu/libplds4.so
(0x00007ff684c20000)
It is building with libcmalloc always...
Did you change the ceph makefiles to build librbd/librados with jemalloc ?
Thanks & Regards
Somnath
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Alexandre DERUMIER
Sent: Wednesday, August 19, 2015 7:01 AM
To: Mark Nelson
Cc: ceph-devel
Subject: Re: Ceph Hackathon: More Memory Allocator Testing
Thanks Marc,
Results are matching exactly what I have seen with tcmalloc 2.1 vs 2.4 vs
jemalloc.
and indeed tcmalloc, even with bigger cache, seem decrease over time.
What is funny, is that I see exactly same behaviour client librbd side, with
qemu and multiple iothreads.
Switching both server and client to jemalloc give me best performance on small
read currently.
----- Mail original -----
De: "Mark Nelson" <[email protected]>
À: "ceph-devel" <[email protected]>
Envoyé: Mercredi 19 Août 2015 06:45:36
Objet: Ceph Hackathon: More Memory Allocator Testing
Hi Everyone,
One of the goals at the Ceph Hackathon last week was to examine how to improve
Ceph Small IO performance. Jian Zhang presented findings showing a dramatic
improvement in small random IO performance when Ceph is used with jemalloc. His
results build upon Sandisk's original findings that the default thread cache
values are a major bottleneck in TCMalloc 2.1. To further verify these results,
we sat down at the Hackathon and configured the new performance test cluster
that Intel generously donated to the Ceph community laboratory to run through a
variety of tests with different memory allocator configurations. I've since
written the results of those tests up in pdf form for folks who are interested.
The results are located here:
http://nhm.ceph.com/hackathon/Ceph_Hackathon_Memory_Allocator_Testing.pdf
I want to be clear that many other folks have done the heavy lifting here.
These results are simply a validation of the many tests that other folks have
already done. Many thanks to Sandisk and others for figuring this out as it's a
pretty big deal!
Side note: Very little tuning other than swapping the memory allocator and a
couple of quick and dirty ceph tunables were set during these tests. It's quite
possible that higher IOPS will be achieved as we really start digging into the
cluster and learning what the bottlenecks are.
Thanks,
Mark
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in the
body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in the
body of a message to [email protected] More majordomo info at
http://vger.kernel.org/majordomo-info.html
________________________________
PLEASE NOTE: The information contained in this electronic mail message is
intended only for the use of the designated recipient(s) named above. If the
reader of this message is not the intended recipient, you are hereby notified
that you have received this message in error and that any review,
dissemination, distribution, or copying of this message is strictly prohibited.
If you have received this communication in error, please notify the sender by
telephone or e-mail (as shown above) immediately and destroy any and all copies
of this message in your possession (whether hard copies or electronically
stored copies).
N�����r��y���b�X��ǧv�^�){.n�+���z�]z���{ay� ʇڙ�,j��f���h���z� �w���
���j:+v���w�j�m��������zZ+�����ݢj"��!tml=
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
