I think I set it up for 572 bytes with the SC41. I forget what I did for QD33. I’ll check my switches when I get home and let you know Mehta worked for SC41. Emulexes are sometimes similar.
> On Mar 28, 2026, at 11:59, Jacob Ritorto <[email protected]> wrote: > > I recall I trusted the Stanton geometry specs and had success with my 2372. > Was working great until power supply blew. I used a QD33 and an SC41 just > fine so I think you’re on course to success. > > Jake > >> On Oct 13, 2015, at 02:54, Josh Dersch <[email protected]> wrote: >> >> Subject line covers it; the M2372K manual isn't on Bitsavers (the 2382K is, >> but it's significantly different) and all I've found is this covering the >> basics, and I'm not 100% sure it's correct: >> >> http://stason.org/TULARC/pc/hard-drives-hdd/fujitsu/M2372K-824MB-8-0-FH-HSMD.html#.VhyRlbTFsls >> >> Anyone have this manual? Can you confirm that the settings listed on >> stason.org are valid? I'm trying to get this drive to format using an >> Emulex UD33 (UNIBUS SMD) controller, and I'm not having much luck. (I'm >> also not certain that the 2372K isn't too new for the controller; another >> place a manual would be of immense help.) >> >> Thanks, >> Josh >>
