Hi Wei, The issue might be that the PDI you are attempting to use with `fpga_manager` is considered a “base” PDI that is part of the BOOT PDI image loaded by the PLM during boot. Since this PDI contains the PLM/PPU information these cores cannot be reconfigured at run time (as indicated by the PLM Error Status message).
A “full” PDI in Versal is considered to be the entire PL region except the configuration that is relevant to the “base" PDI. This most likely means that when not using a DFX flow some “manual” assmebly/generation/compiling of PDI/DTBO files needs to be done to produce files in the correct format expected by `fpga_manager` for a full PL reconfiguration. In some ways this may be similar to what was done when supporting UltraScale+ in Jasper by assembling fragments and then piecing it all together before applying the overlays. This is very interesting work, good luck with it! Let us know what you learn. Best, Mitch On Jan 2, 2024, at 11:31 AM, 'Wei Liu' via [email protected] <[email protected]> wrote: Hi All, Happy new year! I'm working on the 400G Ethernet test on vpk180<https://www.xilinx.com/products/boards-and-kits/vpk180.html> board, which is based on the AMD Versal SoC chip. To do the test remotely (and also to port the casper toolflow on this board later), I created a Ubuntu image for this board. The OS boots up on this board successfully, but I can't configure the full PL through Linux by following the instructions here<https://xilinx-wiki.atlassian.net/wiki/spaces/A/pages/1188397412/Solution+Versal+PL+Programming>. If I create a DFX vivado project, I can configure the PL through Linux with a partial pdi file; If I try to configure the PL with a full pdi generated from Vivado, the error message I got is: <image.png> It looks like the full pdi file generated by Vivado can't be used in PL reconfiguration through Linux directly. Does anyone know how to generate a full pdi for PL only , which can be used for PL configuration through Linux? Thanks! Best, Wei -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]<mailto:[email protected]>. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAFRG3zQ%2B2vfgxA%3D8NOUy3g8n-g59c5NVyV0OurVWMSKu_Z7%2Bew%40mail.gmail.com<https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAFRG3zQ%2B2vfgxA%3D8NOUy3g8n-g59c5NVyV0OurVWMSKu_Z7%2Bew%40mail.gmail.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/E6A808B6-1917-48DE-9596-5BDD48A0367C%40byu.edu.
