Hi Haystek, This most likely is a python version conflict. When you activate your Python environment, what is the version of Python that `python -V` returns? For me, my casper dev env returns Python 3.8.2.
The second tutorial incorporates the RFDC yellow block. When the back end tool encounters this block there is additional code that is triggered to support the software defined capabilities of the RFDC in the on-chip processor. This is why running the first tutorial this may go unnoticed but encountered when building subsequent models for RFSoC. Hope this helps, Mitch > On Nov 14, 2023, at 6:21 AM, Heystek Grobler <[email protected]> wrote: > > Good day everyone. > > I have some good news. > > I have gotten the first tutorial from the RFSoC ZCU111 to compile on both of > my machines without any issues. Thank you everyone for all the help! I really > appreciate it! > > I have tried to compile the second tutorial and I get the same error message > on both of my machines. The screenshot is attached below. > > <Screenshot 2023-11-14 at 15.13.56.png> > I have no idea why the first tutorial compiles but the second one doesn't. > > Does anyone have an idea what might be going on? > > Thank you so much for the help. > > Heystek > > --------------------------------------------------------- > Heystek Grobler > > 0832721009 > [email protected] <mailto:[email protected]> > > > On Wed, Nov 1, 2023 at 7:39 PM Mitch Burnett <[email protected] > <mailto:[email protected]>> wrote: >> Hi Heystek, >> >> I think it better if you used 20.04. Is the first machine (18.04) the one >> that crashes and that when you have had Matlab working that comes from your >> second machine (20.04)? >> >> I just did some tests and was able to reproduce your issue with generating >> the dtbo. In your xilinx device tree repo, checkout the `xlnx_rel_v2021.1` >> branch. This is not in the "Getting Started with RFSoC” guide, and now needs >> to be. We will need to make sure to get this change documented. >> >> Additionally, I also now realize that mlib_devel `m2021a` branch will not >> work with the most recent tutorials that were recently updated for new >> changes that fixes a slew of issues with the rfdc yellow block. This is >> because those changes are in the `m2021a-dev` branch of mlib_devel and yet >> to be merged into `m2021a`. Hopefully we can do that soon. But, for now, >> please be sure to also checkout the `m2021a-dev` branch of your mlib_devel >> repo before moving into the subsequent tutorials that use the rfdc (the adc >> interface and spectrometer tutorials). >> >> Best, >> Mitch >> >>> On Nov 1, 2023, at 4:33 AM, Heystek Grobler <[email protected] >>> <mailto:[email protected]>> wrote: >>> >>> >>> Hey Mitch and everyone. >>> >>> Thank you so much for the help! I really appreciate it! >>> >>> I am trying to set up the toolflow on two machines. >>> >>> The first machine is: >>> Ubuntu 18.04 LTS >>> Vitis/Vivado 2021.1 >>> >>> The second machine: >>> Ubuntu 20.04 LTS >>> Vitis/Vivado 2021.1 >>> >>> I am currently busy with the setup on the first machine (Ubuntu 18.04) >>> since the second machine is having issues regarding the university >>> firewall. If needed I can update the first machine to Ubuntu 20.04. >>> >>> I downloaded the Xilinx device tree repo by making use of (I assume it is >>> the current master branch commit1a5881d >>> <https://github.com/Xilinx/device-tree-xlnx/commit/1a5881d00406fa4f68eee63064799b8e5b28a41a>): >>> git clone https://github.com/xilinx/device-tree-xlnx.git >>> >>> Below are screenshots of the Matlab crash at startup: >>> >>> <Screenshot 2023-11-01 at 12.31.04.png> >>> >>> Here is the log file: >>> >>> <Screenshot 2023-11-01 at 12.31.35.png> >>> >>> <Screenshot 2023-11-01 at 12.31.42.png> >>> >>> Thank you for all the help! >>> >>> Heystek >>> >>> >>> --------------------------------------------------------- >>> Heystek Grobler >>> >>> 0832721009 >>> [email protected] <mailto:[email protected]> >>> >>> On Tuesday, Oct 31, 2023 at 10:30 PM, Mitchell Burnett >>> <[email protected] <mailto:[email protected]>> wrote: >>> Heystek, >>> >>> Matlab crashing: You had said earlier that you were on Ubuntu 20.04? Is >>> this still the case? >>> >>> Toolflow error: Can you send me the commit hash for your current head of >>> the Xilinx device tree repo? >>> >>> Mitch >>> >>>> On Oct 31, 2023, at 1:52 PM, Heystek Grobler <[email protected] >>>> <mailto:[email protected]>> wrote: >>>> >>>> >>>> Hey Kaj, Mitch, Morag and everyone. >>>> >>>> Thank you for the help! I really appreciate it. >>>> >>>> I have changed my startsg.local file and it fits in with your suggestions. >>>> I get new errors now. The first one is Matlab sometimes crashes at startup >>>> with: Abnormal termination: Segmentation violation >>>> >>>> <Screenshot 2023-10-31 at 21.19.34.png> >>>> >>>> When Matlab decided to work again, and I compiled the first tutorial, then >>>> I got this error: “hsi::generate_target -dir $jdts_dir" >>>> >>>> <Screenshot 2023-10-31 at 20.52.47.png> >>>> >>>> <Screenshot 2023-10-31 at 20.52.56.png> >>>> >>>> Has anyone stumbled onto these problems? >>>> >>>> Thank you for the help. >>>> >>>> Heystek >>>> >>>> --------------------------------------------------------- >>>> Heystek Grobler >>>> >>>> 0832721009 >>>> [email protected] <mailto:[email protected]> >>>> >>>> On Tuesday, Oct 31, 2023 at 9:23 AM, Morag Brown <[email protected] >>>> <mailto:[email protected]>> wrote: >>>> Hi Heystek, Mitch, all, >>>> >>>> The System Generator hanging issue occasionally still happens to me too >>>> (but very rarely). However, it happened to me with every compile at one >>>> time when I had a version of MATLAB installed that had many other >>>> toolboxes installed. >>>> >>>> There is a note here >>>> <https://casper-toolflow.readthedocs.io/en/latest/src/How-to-install-Matlab.html#current-vivado-flow-how-to-install-r2021a> >>>> under step 5 of "How to install MATLAB" in the CASPER ReadTheDocs >>>> instructions that says toolbox clashes have been tentatively accepted as >>>> the cause for this problem. There is also a link to a Xilinx AMD blog post >>>> where if you click on "more answers" at the bottom, you will see a list of >>>> MATLAB toolboxes that someone else determined as being compatible with >>>> System Generator. >>>> >>>> If your SysGen hanging issue happens with every compile, then check your >>>> MATLAB toolboxes against this list and uninstall any not listed. Or if you >>>> don't need any specific toolboxes, then just ensure that you have only the >>>> ones required by the CASPER tools installed (i.e. the ones Mitch has >>>> listed, that are also listed in the link I have provided above). >>>> >>>> I've not encountered the "std::exception error", but that's only because >>>> I'm still using 18.04 and not 20.04 - the guide that Mitch has pointed you >>>> to in the Xilinx AMD docs should hopefully fix that. >>>> >>>> One last thing - in order to be mindful of any one person's inbox, I'd >>>> recommend that you send your replies on a thread to the mailing list >>>> rather than a specific person. This way anyone else who has encountered >>>> these issues may provide guidance, and anyone who might encounter these >>>> issues in the future will be able to find the thread in the mailing list >>>> archive. >>>> >>>> Morag >>>> >>>> On Tue, 31 Oct 2023, 07:17 Mitch Burnett, <[email protected] >>>> <mailto:[email protected]>> wrote: >>>>> Hi Heystek, >>>>> >>>>> One thing first, then the hang issue. From your screenshot of your >>>>> startsg.local I notice that you need to add an additional env variable to >>>>> the Xilinx device tree repo, and that you need to change the back end env >>>>> variable form vivado to Vitis. Please compare your startsg.local file to >>>>> the one shown in Getting Started With RFSoC >>>>> <https://github.com/casper-astro/tutorials_devel/blob/main/docs/tutorials/rfsoc/tut_getting_started.md#toolflow-setup> >>>>> tutorial. >>>>> >>>>> Now your remaining issue… Unfortunately, System Generator hanging like >>>>> this is a known issue but I am not aware of if we know of the cause. I >>>>> believe the best known explanation for this this that is a race condition >>>>> between System Generator and Simulink where the return from System >>>>> Generator is not received by the main Simulink process and results in the >>>>> hang. This phenomena occasionally happens to me, but seldomly. >>>>> >>>>> However, here is more info for you that if you have not done the >>>>> following during your setup this may be something else you want to pay >>>>> attention to. At one time folks at SARAO had reported that with every >>>>> attempted build this issue would occur. I recall that we determined the >>>>> issue was a mix of a few things: 1) before installing Vitis/Model >>>>> Composer the symbolic links in the the Xilinx Model Composer installation >>>>> guide >>>>> <https://docs.xilinx.com/r/2021.2-English/ug1483-model-composer-sys-gen-user-guide/Supported-MATLAB-Versions-and-Operating-Systems> >>>>> needed to be completed. The instructions mention either installing gcc6 >>>>> or creating the symbolic links mentioned in that previous link. I have >>>>> only ever done the symbolic link approach. Mugundhan recently reported >>>>> here that this seemed to remove the "std::exception error" when starting >>>>> system generator. 2) In addition to this gcc nuance, this didn’t seem to >>>>> be enough and we found (through anecdotal evidence) that the hanging was >>>>> also related to additional matlab add-on toolboxes that were installed >>>>> but not required. Because of this, it is recommended to only install the >>>>> following toolboxes when installing matlab: Simulink, Communications >>>>> toolbox, DSP System toolbox, Fixed-Point Designer toolbox, Signal >>>>> Processing toolbox. I want to recall that it was the Matlab or Simulink >>>>> SDK toolbox that when installed interfere with the operation of Matlab. >>>>> >>>>> Dealing with this hanging issue is heuristic. I am not aware of a full >>>>> solution. >>>>> >>>>> Even with all this, when this happens to me (again seldom… but does >>>>> happen) I click the “cancel” button that appears on the bottom of the >>>>> model window (the window where the model canvas containing the blocks are >>>>> placed — there is a status bar for the model generation status and the >>>>> cancel button is next to that) then I spam ctrl-c inside the terminal >>>>> where I ran `./startsg starts.local`. This will usually trigger the >>>>> interrupt caught by System Generator and closes the System Generator >>>>> Compilation status with control returning back to Matlab (I have access >>>>> to the command prompt that now reports a nonsensical error) and I can >>>>> then rerun `jasper`. I can think of a handful of times where the >>>>> interrupt is not caught and just have to close Matlab entirely and start >>>>> fresh (I have never lost a model file or saved progress when this >>>>> happens). >>>>> >>>>> Best, >>>>> Mitch >>>>> >>>>>> On Oct 30, 2023, at 3:03 AM, Heystek Grobler <[email protected] >>>>>> <mailto:[email protected]>> wrote: >>>>>> >>>>>> Hey Mitch. >>>>>> >>>>>> Thank you for the reply. >>>>>> >>>>>> I have installed everything in the virtual environment. The tutorial1 is >>>>>> now running for 14 hours without being completed. Below are screenshots >>>>>> of my setup files: >>>>>> >>>>>> <Screenshot 2023-10-30 at 10.54.07.png> >>>>>> >>>>>> <Screenshot 2023-10-30 at 10.50.09.png> >>>>>> >>>>>> <Screenshot 2023-10-30 at 10.50.31.png> >>>>>> >>>>>> I have followed the steps but I can't seem to get the error message >>>>>> "caught std: exception" to disappear. >>>>>> >>>>>> <Screenshot 2023-10-30 at 11.03.32.png> >>>>>> >>>>>> Is there anything else that I can try? >>>>>> >>>>>> Thank you for the help! >>>>>> >>>>>> Heystek >>>>>> >>>>>> >>>>>> --------------------------------------------------------- >>>>>> Heystek Grobler >>>>>> >>>>>> 0832721009 >>>>>> [email protected] <mailto:[email protected]> >>>>>> >>>>>> >>>>>> On Mon, Oct 30, 2023 at 4:50 AM Mitch Burnett <[email protected] >>>>>> <mailto:[email protected]>> wrote: >>>>>>> Hi Heystek, >>>>>>> >>>>>>> This issue is most likely caused in a discrepancy between the python >>>>>>> environment you setup for mlib_devel and one that matlab/simulink is >>>>>>> using. Can you verify that when you start matlab that your python >>>>>>> environment is active, or that your startsg.local configuration file >>>>>>> sets the python environment correctly? Additionally, can you confirm >>>>>>> that when setting up your python environment it is using python3 and >>>>>>> that after you cloned mlib_devel that you also installed all >>>>>>> dependencies into that environment (i.e., In your clone of mlib_devel >>>>>>> that you ran `pip install -r requirements.txt`)? >>>>>>> >>>>>>> Hope this helps, >>>>>>> >>>>>>> Mitch >>>>>>> >>>>>>>> On Oct 28, 2023, at 9:11 AM, Heystek Grobler <[email protected] >>>>>>>> <mailto:[email protected]>> wrote: >>>>>>>> >>>>>>>> Good day Mitch and Kaj. >>>>>>>> >>>>>>>> I hope that you guys are still doing well. >>>>>>>> >>>>>>>> Thank you so much for the help. I really appreciate it. >>>>>>>> >>>>>>>> I have made some good headway by following the instructions that you >>>>>>>> have sent me. I stumbled upon a new error by compiling the first >>>>>>>> tutorial. I received the error: ModuleNotFoundError: No module named >>>>>>>> ‘odict' >>>>>>>> >>>>>>>> I have installed odict in python but I still get this error. I have >>>>>>>> attached a screenshot as well. Has anyone encountered this error? >>>>>>>> >>>>>>>> <PastedGraphic-1.png> >>>>>>>> >>>>>>>> Thank you for all of the help! >>>>>>>> >>>>>>>> Heystek >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> --------------------------------------------------------- >>>>>>>> Heystek Grobler >>>>>>>> >>>>>>>> 0832721009 >>>>>>>> [email protected] <mailto:[email protected]> >>>>>>>> >>>>>>>> >>>>>>>>> On 25 Oct 2023, at 20:39, Mitch Burnett <[email protected] >>>>>>>>> <mailto:[email protected]>> wrote: >>>>>>>>> >>>>>>>>> Sorry, I should be more helpful to specifically point out which of >>>>>>>>> the issues in this list on the CASPER wiki link that you are running >>>>>>>>> into. >>>>>>>>> >>>>>>>>> Morag had pointed you in the right direction. Your specific issue is >>>>>>>>> that there is a conflict between a library in the Ubuntu installation >>>>>>>>> and the same library used by Vivado but using its own copy, that also >>>>>>>>> happens to be a different version. Morag’s explanation about how to >>>>>>>>> handle this is the correct approach. It is also the approach detailed >>>>>>>>> in the blog post on the casper wiki link I posted. The specific blog >>>>>>>>> post in reference is this one: >>>>>>>>> https://strath-sdr.github.io/tools/matlab/sysgen/vivado/linux/2021/01/28/sysgen-on-20-04.html >>>>>>>>> >>>>>>>>> Mitch >>>>>>>>> >>>>>>>>>> On Oct 25, 2023, at 12:34 PM, Mitch Burnett <[email protected] >>>>>>>>>> <mailto:[email protected]>> wrote: >>>>>>>>>> >>>>>>>>>> Hi Heystek, >>>>>>>>>> >>>>>>>>>> The full set of instructions and how to overcome different issues >>>>>>>>>> based on the version of Ubuntu is documented on the CASPER wiki for >>>>>>>>>> installing the toolflow here: >>>>>>>>>> https://casper-toolflow.readthedocs.io/en/latest/index.html#a-note-on-operating-systems >>>>>>>>>> >>>>>>>>>> This has the solutions to all the current known issues with running >>>>>>>>>> the tools on these version of Ubuntu. >>>>>>>>>> >>>>>>>>>> From your screenshots, it also looks like you will need to >>>>>>>>>> re-install the Xilinx suite of tools. In the installation GUI you >>>>>>>>>> should select “Vitis”. This selection will install Vivado, Vitis, >>>>>>>>>> and System Generator + Model Composer for Simulink. >>>>>>>>>> >>>>>>>>>> Sorry you are having these issues. >>>>>>>>>> >>>>>>>>>> Mitch >>>>>>>>>> >>>>>>>>>>> On Oct 25, 2023, at 12:30 PM, Kaj Wiik <[email protected] >>>>>>>>>>> <mailto:[email protected]>> wrote: >>>>>>>>>>> >>>>>>>>>>> Hi Heystek, >>>>>>>>>>> >>>>>>>>>>> Indeed, it took me a while to remember this issue, please see my >>>>>>>>>>> notes: >>>>>>>>>>> https://gitlab.utu.fi/kjwiik/casper-installation#matlab-errors >>>>>>>>>>> >>>>>>>>>>> Also, I think you did not install Vitis, when asked in >>>>>>>>>>> installation, you should select to install Vitis, not Vivado (Vitis >>>>>>>>>>> selection also installs Vivado). >>>>>>>>>>> Unfortunately, I think you have to reinstall because at least I do >>>>>>>>>>> not know how to add Vitis to Vivado install. >>>>>>>>>>> >>>>>>>>>>> I hope this helps, >>>>>>>>>>> Kaj >>>>>>>>>>> >>>>>>>>>>> On Wed, 25 Oct 2023 at 21:23, Heystek Grobler >>>>>>>>>>> <[email protected] <mailto:[email protected]>> wrote: >>>>>>>>>>>> Hey Morag and everyone. >>>>>>>>>>>> >>>>>>>>>>>> I have installed kde-full and I am still getting the same issues >>>>>>>>>>>> and errors. Below are screenshots: >>>>>>>>>>>> >>>>>>>>>>>> <Screenshot 2023-10-25 at 20.05.57.png> >>>>>>>>>>>> >>>>>>>>>>>> <Screenshot 2023-10-25 at 20.07.57.png> >>>>>>>>>>>> >>>>>>>>>>>> <Screenshot 2023-10-25 at 20.08.08.png> >>>>>>>>>>>> >>>>>>>>>>>> I searched through the mail list. In the list Kaj Wiik encountered >>>>>>>>>>>> the same problem, but I can not find the solution. >>>>>>>>>>>> >>>>>>>>>>>> @Kaj did you perhaps manage to find a way for the toolchain to >>>>>>>>>>>> work? In the email list you and Mitch Burnett talked about posting >>>>>>>>>>>> a recipe somewhere for this. >>>>>>>>>>>> >>>>>>>>>>>> Thank you for the help. >>>>>>>>>>>> >>>>>>>>>>>> Heystek >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>> Heystek Grobler >>>>>>>>>>>> >>>>>>>>>>>> 0832721009 >>>>>>>>>>>> [email protected] <mailto:[email protected]> >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>>> On 16 Oct 2023, at 15:47, Morag Brown <[email protected] >>>>>>>>>>>>> <mailto:[email protected]>> wrote: >>>>>>>>>>>>> >>>>>>>>>>>>> Hi Heystek, >>>>>>>>>>>>> >>>>>>>>>>>>> Can't remember for sure, but I think that "MATLABWindow >>>>>>>>>>>>> application failed to launch" issue has been fixed in the past by >>>>>>>>>>>>> installing the kde-full package. >>>>>>>>>>>>> >>>>>>>>>>>>> Otherwise I think the issue in red above is a library clashing >>>>>>>>>>>>> issue - I gather the end of that error message says something >>>>>>>>>>>>> about an undefined symbol, which would be because libhogweed >>>>>>>>>>>>> expects a different version of the library it depends on than >>>>>>>>>>>>> what is actually being used. If you run the following in the >>>>>>>>>>>>> MATLAB terminal: >>>>>>>>>>>>> >>>>>>>>>>>>> !ldd /lib/x86_64-linux-gnu/libhogweed.so <http://libhogweed.so/>.2 >>>>>>>>>>>>> >>>>>>>>>>>>> It might show you that it's using the libgmp version that comes >>>>>>>>>>>>> with Model Composer/Vivado. If you move that out of the path >>>>>>>>>>>>> (typically you can just make an "exclude" directory within the >>>>>>>>>>>>> directory containing the MC/Vivado libraries and move the >>>>>>>>>>>>> offending items into that, so you can recover them later should >>>>>>>>>>>>> you need), it will then use the system version of the library, >>>>>>>>>>>>> which will hopefully have what is needed. >>>>>>>>>>>>> >>>>>>>>>>>>> I recall there being a few issues like this on the mailing list >>>>>>>>>>>>> in the path, so searching the archives should hopefully provide >>>>>>>>>>>>> more info if you need. >>>>>>>>>>>>> >>>>>>>>>>>>> Morag >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> On Mon, Oct 16, 2023 at 1:21 PM Heystek Grobler >>>>>>>>>>>>> <[email protected] <mailto:[email protected]>> >>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> Hey Jack, Dan and Francois. >>>>>>>>>>>>>> >>>>>>>>>>>>>> Thank you so much for the help and guidance, I really appreciate >>>>>>>>>>>>>> it! >>>>>>>>>>>>>> >>>>>>>>>>>>>> We reached out to the Xilinx University Program and received the >>>>>>>>>>>>>> necessary licenses. Below is an image of the license manager. >>>>>>>>>>>>>> >>>>>>>>>>>>>> <Screenshot from 2023-10-16 13-13-19.png> >>>>>>>>>>>>>> >>>>>>>>>>>>>> <Screenshot from 2023-10-16 13-13-40.png> >>>>>>>>>>>>>> I have set up everything according to the getting started page >>>>>>>>>>>>>> but I ran into the following errors when trying to open >>>>>>>>>>>>>> Simulink. Has anyone encountered something like this? >>>>>>>>>>>>>> >>>>>>>>>>>>>> <Screenshot from 2023-10-16 13-16-10.png> >>>>>>>>>>>>>> Thank you so much for the help! >>>>>>>>>>>>>> >>>>>>>>>>>>>> Heystek >>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>> Heystek Grobler >>>>>>>>>>>>>> >>>>>>>>>>>>>> 0832721009 >>>>>>>>>>>>>> [email protected] <mailto:[email protected]> >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Thu, Oct 5, 2023 at 11:09 PM Francois Kapp >>>>>>>>>>>>>> <[email protected] <mailto:[email protected]>> wrote: >>>>>>>>>>>>>>> Also look into whether your institution is registered under the >>>>>>>>>>>>>>> Xilinx University Program - if so, Xilinx are generally >>>>>>>>>>>>>>> amenable to donating licenses. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Cheers, >>>>>>>>>>>>>>> Francois >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> On Thu, Oct 5, 2023 at 3:13 AM Jack Hickish >>>>>>>>>>>>>>> <[email protected] <mailto:[email protected]>> wrote: >>>>>>>>>>>>>>>> I _think_ that's all you need. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> FYI - you can probably get a 30 day trial (or 90 in the case >>>>>>>>>>>>>>>> of sysgen) license for free, which should save you waiting for >>>>>>>>>>>>>>>> XUP. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> Cheers >>>>>>>>>>>>>>>> Jack >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> On Thu, 5 Oct 2023 at 11:03, Heystek Grobler >>>>>>>>>>>>>>>> <[email protected] <mailto:[email protected]>> >>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>> Hey Jack and Kaj. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Thank you so much for the help and guidance. So the license I >>>>>>>>>>>>>>>>> got with the RFSoC ZSU111 does not contain the Xilinx ML >>>>>>>>>>>>>>>>> Enterprise Edition and it also does not contain SysGen. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> My University (The University of Pretoria) is reaching out to >>>>>>>>>>>>>>>>> Xilinx to buy the appropriate licence. Will it suffice if the >>>>>>>>>>>>>>>>> University gets the Xilinx ML Enterprise Edition and SysGen >>>>>>>>>>>>>>>>> or should something else be added to it? >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Thank you for the help! >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> Heystek >>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>> Heystek Grobler >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> 0832721009 >>>>>>>>>>>>>>>>> [email protected] <mailto:[email protected]> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> On Sun, Oct 1, 2023 at 6:09 PM Jack Hickish >>>>>>>>>>>>>>>>> <[email protected] <mailto:[email protected]>> wrote: >>>>>>>>>>>>>>>>>> I would suggest trying to get the new license. I'm suspect >>>>>>>>>>>>>>>>>> that Vivado 2020 supports the RFSoC chips you want (though I >>>>>>>>>>>>>>>>>> haven't checked) but using an older version than the >>>>>>>>>>>>>>>>>> toolflow suggests will almost certainly lead to other >>>>>>>>>>>>>>>>>> issues. Swimming against the CASPER version-tide is never a >>>>>>>>>>>>>>>>>> particularly fun thing to do :) >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> On Sun, 1 Oct 2023 at 13:22, Heystek Grobler >>>>>>>>>>>>>>>>>> <[email protected] <mailto:[email protected]>> >>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>> Hey Jack. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Should I then try to get a SysGen/ModelComposer license for >>>>>>>>>>>>>>>>>>> 2021.1 or is there a way to still use Vivado 2020.06 with >>>>>>>>>>>>>>>>>>> the RFSoC? >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Thank you for the help! >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> Heystek >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>>>> Heystek Grobler >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> 0832721009 >>>>>>>>>>>>>>>>>>> [email protected] <mailto:[email protected]> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On 01 Oct 2023, at 14:12, Jack Hickish >>>>>>>>>>>>>>>>>>>> <[email protected] <mailto:[email protected]>> >>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> Not quite sure what to make of this, but I don't see >>>>>>>>>>>>>>>>>>>> anything for SysGen / ModelComposer newer than 2020.06, >>>>>>>>>>>>>>>>>>>> which wouldn't be valid with Vivado 2021.1 >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> On Sun, 1 Oct 2023 at 12:47, Heystek Grobler >>>>>>>>>>>>>>>>>>>> <[email protected] >>>>>>>>>>>>>>>>>>>> <mailto:[email protected]>> wrote: >>>>>>>>>>>>>>>>>>>>> Hey Jack. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Thank you so much for the email. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> I have included screenshots of the licence manager below: >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> <Screenshot 2023-10-01 at 13.42.31.png> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> <Screenshot 2023-10-01 at 13.42.52.png> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> <Screenshot 2023-10-01 at 13.43.15.png> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Do I need another/different licence from Xilinx or is >>>>>>>>>>>>>>>>>>>>> there a way around this? >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Thank you for the help. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> Heystek >>>>>>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>>>>>> Heystek Grobler >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> 0832721009 >>>>>>>>>>>>>>>>>>>>> [email protected] <mailto:[email protected]> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> On Sun, Oct 1, 2023 at 1:10 PM Jack Hickish >>>>>>>>>>>>>>>>>>>>> <[email protected] <mailto:[email protected]>> >>>>>>>>>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>>>>>>>>>> Hi Heystek, >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> As the error in the diagnostic viewer suggests -- you >>>>>>>>>>>>>>>>>>>>>> don't seem to have an appropriate sysgen license, in >>>>>>>>>>>>>>>>>>>>>> either the default search paths (I think at least one of >>>>>>>>>>>>>>>>>>>>>> these is ~/.Xilinx/Xilinx.lic) or specified with an >>>>>>>>>>>>>>>>>>>>>> environment variable. Do you think you have a license >>>>>>>>>>>>>>>>>>>>>> the system isn't finding or is it possible you just need >>>>>>>>>>>>>>>>>>>>>> to get one from Xilinx? >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Also, the "Could not find Vitis installation" at the >>>>>>>>>>>>>>>>>>>>>> start of the MATLAB prompt is concerning, but I don't >>>>>>>>>>>>>>>>>>>>>> think that's the current issue. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> Cheers >>>>>>>>>>>>>>>>>>>>>> Jack >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> On Sun, 1 Oct 2023 at 11:58, Heystek Grobler >>>>>>>>>>>>>>>>>>>>>> <[email protected] >>>>>>>>>>>>>>>>>>>>>> <mailto:[email protected]>> wrote: >>>>>>>>>>>>>>>>>>>>>>> Good day everyone. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I hope that this email finds you well. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> I am used to working with a ROACH2 and have now started >>>>>>>>>>>>>>>>>>>>>>> with an RFSoC ZCU111. I followed the instructions on >>>>>>>>>>>>>>>>>>>>>>> the CASPER Read The Docs Page and installed Ubuntu >>>>>>>>>>>>>>>>>>>>>>> 20.04, Matlab 2021a and Vivado 2021.1. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> When I try to compile the first tutorial with jasper I >>>>>>>>>>>>>>>>>>>>>>> get the following two errors (screenshots provided). >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> <Screenshot 2023-10-01 at 12.50.59.png> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> <Screenshot 2023-10-01 at 12.51.44.png> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Does anyone perhaps know how I can solve this? >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Thank you for the help. >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> Heystek >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> --------------------------------------------------------- >>>>>>>>>>>>>>>>>>>>>>> Heystek Grobler >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> 0832721009 >>>>>>>>>>>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>>>>>>>>>>> <mailto:[email protected]> >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>>>>>> the Google Groups "[email protected] >>>>>>>>>>>>>>>>>>>>>>> <mailto:[email protected]>" group. >>>>>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving >>>>>>>>>>>>>>>>>>>>>>> emails from it, send an email to >>>>>>>>>>>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>>>>>>>>>>> <mailto:[email protected]>. >>>>>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DTL3FSr%3DJuDgdckj_Euj12y9bo_CWw_KpE_fF9D6aEg%2BA%40mail.gmail.com >>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DTL3FSr%3DJuDgdckj_Euj12y9bo_CWw_KpE_fF9D6aEg%2BA%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>>>>> the Google Groups "[email protected] >>>>>>>>>>>>>>>>>>>>>> <mailto:[email protected]>" group. >>>>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>>>>>> from it, send an email to >>>>>>>>>>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>>>>>>>>>> <mailto:[email protected]>. >>>>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSnqnK_g%2Bk4hX_hj6qmgvkEOoGK%3D86XuzyCNSZ2XF6Hxsw%40mail.gmail.com >>>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSnqnK_g%2Bk4hX_hj6qmgvkEOoGK%3D86XuzyCNSZ2XF6Hxsw%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>>>> the Google Groups "[email protected] >>>>>>>>>>>>>>>>>>>>> <mailto:[email protected]>" group. >>>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>>>>> from it, send an email to >>>>>>>>>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>>>>>>>>> <mailto:[email protected]>. >>>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DRRYiEXovrzdGhXvWNErGaeAM8NV%2BDGV93wktY5CM9Wog%40mail.gmail.com >>>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DRRYiEXovrzdGhXvWNErGaeAM8NV%2BDGV93wktY5CM9Wog%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to >>>>>>>>>>>>>>>>>>>> the Google Groups "[email protected] >>>>>>>>>>>>>>>>>>>> <mailto:[email protected]>" group. >>>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>>>> from it, send an email to >>>>>>>>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>>>>>>>> <mailto:[email protected]>. >>>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSmCU5KTgCcdXB3gJ1sGR8VZa_Rfm1LqkrpWYut2ZxqrdA%40mail.gmail.com >>>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSmCU5KTgCcdXB3gJ1sGR8VZa_Rfm1LqkrpWYut2ZxqrdA%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>>>>> Google Groups "[email protected] >>>>>>>>>>>>>>>>>>> <mailto:[email protected]>" group. >>>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>>> from it, send an email to >>>>>>>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>>>>>>> <mailto:[email protected]>. >>>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/1FC87B36-086C-4120-B560-680A7BFBD778%40gmail.com >>>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/1FC87B36-086C-4120-B560-680A7BFBD778%40gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>>>> Google Groups "[email protected] >>>>>>>>>>>>>>>>>> <mailto:[email protected]>" group. >>>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>>>>> from it, send an email to >>>>>>>>>>>>>>>>>> [email protected] >>>>>>>>>>>>>>>>>> <mailto:[email protected]>. >>>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSnNe3fRXyXFvs_%3DK8%3DuFrXeCOVCK72a9C0%3Dt%3D_fPyqKNw%40mail.gmail.com >>>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSnNe3fRXyXFvs_%3DK8%3DuFrXeCOVCK72a9C0%3Dt%3D_fPyqKNw%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>>> Google Groups "[email protected] >>>>>>>>>>>>>>>>> <mailto:[email protected]>" group. >>>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>>>>> it, send an email to [email protected] >>>>>>>>>>>>>>>>> <mailto:[email protected]>. >>>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DRfVeD6YQNkkMHB4iVQLBS6qJwKxiHGMWeK5iWw%3DaidUg%40mail.gmail.com >>>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DRfVeD6YQNkkMHB4iVQLBS6qJwKxiHGMWeK5iWw%3DaidUg%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>>> Google Groups "[email protected] >>>>>>>>>>>>>>>> <mailto:[email protected]>" group. >>>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>>>> it, send an email to [email protected] >>>>>>>>>>>>>>>> <mailto:[email protected]>. >>>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSmA5vrxHqWd65kCjRRhzSzSq-f9zjKQt%2BRKvJ_e%2BPM02g%40mail.gmail.com >>>>>>>>>>>>>>>> >>>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAG1GKSmA5vrxHqWd65kCjRRhzSzSq-f9zjKQt%2BRKvJ_e%2BPM02g%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>> Google Groups "[email protected] >>>>>>>>>>>>>>> <mailto:[email protected]>" group. >>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>>> it, send an email to [email protected] >>>>>>>>>>>>>>> <mailto:[email protected]>. >>>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAD0AO%3DEJjhE0090%3D1Q354igL6bONt_W0C_PFR6hbK%2BK%3DvbH43w%40mail.gmail.com >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAD0AO%3DEJjhE0090%3D1Q354igL6bONt_W0C_PFR6hbK%2BK%3DvbH43w%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>> Google Groups "[email protected] >>>>>>>>>>>>>> <mailto:[email protected]>" group. >>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>>> it, send an email to [email protected] >>>>>>>>>>>>>> <mailto:[email protected]>. >>>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DROMVp5u10euLzBKu0uvO%3DwpZvNhQTtD8RQc8PK4Hw17g%40mail.gmail.com >>>>>>>>>>>>>> >>>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DROMVp5u10euLzBKu0uvO%3DwpZvNhQTtD8RQc8PK4Hw17g%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> Disclaimer >>>>>>>>>>>>> >>>>>>>>>>>>> The information contained in this communication from the sender >>>>>>>>>>>>> is confidential. It is intended solely for use by the recipient >>>>>>>>>>>>> and others authorized to receive it. If you are not the >>>>>>>>>>>>> recipient, you are hereby notified that any disclosure, copying, >>>>>>>>>>>>> distribution or taking action in relation of the contents of this >>>>>>>>>>>>> information is strictly prohibited and may be unlawful. >>>>>>>>>>>>> >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "[email protected] >>>>>>>>>>>>> <mailto:[email protected]>" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>>>>> send an email to [email protected] >>>>>>>>>>>>> <mailto:[email protected]>. >>>>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAGH-0TdScxXiv%2BorZXbm8MsE%3DBMehFjm3QoiW3GcA3z9d_LNsw%40mail.gmail.com >>>>>>>>>>>>> >>>>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CAGH-0TdScxXiv%2BorZXbm8MsE%3DBMehFjm3QoiW3GcA3z9d_LNsw%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>>>> Groups "[email protected] >>>>>>>>>>> <mailto:[email protected]>" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>>> send an email to [email protected] >>>>>>>>>>> <mailto:[email protected]>. >>>>>>>>>>> To view this discussion on the web visit >>>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADpJ3s2pbAs27Xva11y-Z0a5Vrv0v-RUQYvom1xz%3D8HwZWxw9A%40mail.gmail.com >>>>>>>>>>> >>>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CADpJ3s2pbAs27Xva11y-Z0a5Vrv0v-RUQYvom1xz%3D8HwZWxw9A%40mail.gmail.com?utm_medium=email&utm_source=footer>. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>>> Groups "[email protected] >>>>>>>>>> <mailto:[email protected]>" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected] >>>>>>>>>> <mailto:[email protected]>. >>>>>>>>>> To view this discussion on the web visit >>>>>>>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/786FF447-055D-4D93-A85E-AB8467AA9CE9%40byu.edu >>>>>>>>>> >>>>>>>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/786FF447-055D-4D93-A85E-AB8467AA9CE9%40byu.edu?utm_medium=email&utm_source=footer>. >>>>>>>>> >>>>>>>> >>>>>>> >>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "[email protected] <mailto:[email protected]>" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to [email protected] >>>>> <mailto:[email protected]>. >>>>> To view this discussion on the web visit >>>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/49E12778-7E00-4755-9604-03264209E469%40byu.edu >>>>> >>>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/49E12778-7E00-4755-9604-03264209E469%40byu.edu?utm_medium=email&utm_source=footer>. >>>> >>>> >>>> Disclaimer >>>> >>>> The information contained in this communication from the sender is >>>> confidential. It is intended solely for use by the recipient and others >>>> authorized to receive it. If you are not the recipient, you are hereby >>>> notified that any disclosure, copying, distribution or taking action in >>>> relation of the contents of this information is strictly prohibited and >>>> may be unlawful. >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google Groups >>>> "[email protected] <mailto:[email protected]>" group. >>>> To unsubscribe from this group and stop receiving emails from it, send an >>>> email to [email protected] >>>> <mailto:[email protected]>. >>>> To view this discussion on the web visit >>>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/48453fdd-95e8-4cd2-b0a0-8f7f05c5f4b7%40Canary >>>> >>>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/48453fdd-95e8-4cd2-b0a0-8f7f05c5f4b7%40Canary?utm_medium=email&utm_source=footer>. >>> >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "[email protected] <mailto:[email protected]>" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected] >>> <mailto:[email protected]>. >>> To view this discussion on the web visit >>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CE0E4746-488C-4A18-B275-A48258D7F89C%40gmail.com >>> >>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CE0E4746-488C-4A18-B275-A48258D7F89C%40gmail.com?utm_medium=email&utm_source=footer>. >>> >>> -- >>> You received this message because you are subscribed to the Google Groups >>> "[email protected] <mailto:[email protected]>" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected] >>> <mailto:[email protected]>. >>> To view this discussion on the web visit >>> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/e915b4d9-b876-42d5-8b98-28e7266376b5%40Canary >>> >>> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/e915b4d9-b876-42d5-8b98-28e7266376b5%40Canary?utm_medium=email&utm_source=footer>. >> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "[email protected] <mailto:[email protected]>" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] >> <mailto:[email protected]>. >> To view this discussion on the web visit >> https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/8FC75DB8-F48B-4B7B-82B1-9BE4B484DB5A%40byu.edu >> >> <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/8FC75DB8-F48B-4B7B-82B1-9BE4B484DB5A%40byu.edu?utm_medium=email&utm_source=footer>. > > > -- > You received this message because you are subscribed to the Google Groups > "[email protected] <mailto:[email protected]>" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DTd5KhDhXDV9Rm5EC%2BEhJh9f3U_AvR5rvwXJn2UwaXjKw%40mail.gmail.com > > <https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/CALWRf%3DTd5KhDhXDV9Rm5EC%2BEhJh9f3U_AvR5rvwXJn2UwaXjKw%40mail.gmail.com?utm_medium=email&utm_source=footer>. -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/0D2F132B-8031-4425-B933-27AD1ECD4BCA%40gmail.com.
