Does the spectrometer tutorial work with the 14 bit Red Pitaya board as
well? The tutorial mentions the 10 bit board, but I am using the 14 bit
board version.
Also, going through the spectrometer tutorial with the 14 bit board, I get
the following message at the terminal when executing the python command.
Can someone help me with what might be the issue here?
Connecting to Red Pitaya: rp-F07516.local
Uploading: tut_spec.fpg
These are the devices in your design ...
['acc_cnt', 'acc_len', 'accum0_snap_ss_bram', 'accum0_snap_ss_ctrl',
'accum0_snap_ss_status', 'accum1_snap_ss_bram', 'accum1_snap_ss_ctrl',
'accum1_snap_ss_status', 'accumdat_snap_ss_bram', 'accumdat_snap_ss_ctrl',
'accumdat_snap_ss_status', 'adc_dv', 'adc_sample_cnt',
'adc_voltage_snap_ss_bram', 'adc_voltage_snap_ss_ctrl',
'adc_voltage_snap_ss_status', 'fft_sync_inc0', 'fft_sync_inc1',
'reg_cntrl', 'snap_gap', 'sync_cnt', 'sync_reg', 'sys_block',
'sys_board_id', 'sys_clkcounter', 'sys_rev', 'sys_rev_rcs',
'sys_scratchpad']
Traceback (most recent call last):
File "tut_spec.py", line 38, in <module>
spec0=fpga.snapshots.accum0_snap_ss.read(arm=False)['data']
File "/usr/local/lib/python2.7/dist-packages/casperfpga/snap.py", line
227, in read
rawdata, rawtime = self.read_raw(**kwargs)
File "/usr/local/lib/python2.7/dist-packages/casperfpga/snap.py", line
333, in read_raw
bram_dmp['length'] / (self.width_bits / 8)))
RuntimeError: accum0_snap_ss.read_uint() - expected 16384 bytes, got 32
--
You received this message because you are subscribed to the Google Groups
"[email protected]" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/a/lists.berkeley.edu/d/msgid/casper/b56e82d1-5faa-4271-935a-94067f3cedd2%40lists.berkeley.edu.
