Hi all, Sorry if this has already been explained/solved. I programmed Tutorial 3 onto a SNAP board and noticed some unexpected spikes in the spectrum. I have set up the hardware as explained in the python script with a 10 MHz, 8dBm reference going into the SYNTH_OSC SMA (3rd SMA from the left).
The attached figure shows the spectrum with no input going into the SNAP board. There are large spikes in the spectrum every 50 MHz with the largest at 200 MHz. When I add a signal to the SNAP board, I can see it in the spectrometer at the correct frequency but the other spikes are still present. Do you know what is causing these spikes and how they can be removed? Any help would be greatly appreciated. Thanks, David -- You received this message because you are subscribed to the Google Groups "[email protected]" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected].
