Steve Underwood schrieb:
> thomas schorpp wrote:
>> buffer overflow in libspandsp 0.0.6pre8
>>
>> Set: FAXFILE=/tmp/email2fax/1240426755-392862544/xxxxxxxx.tif.tif
>>
>> Apr 22 18:59:48 VERBOSE[3052456848] logger.c: -- Executing
>> [...@faxserver:6] TxFAX("SIP/qsc-de-09e6",
>> "/tmp/email2fax/1240426755-392862544/xxxxxxxx.tif.tif,caller,debug,ecm")
>>
>> Apr 22 18:59:53 tom3 callweaver[24175]: WARNING[3052456848]:
>> app_txfax.c:85 in span_message: WARNING T.30 Cannot open source TIFF
>> file 'U��S��^T��^]����,z^H'
>>
>>
>> does not occur with 0.0.6pre7.
>>
>> Retrowiki tickets system still broken on homepage for new tickets.
>>
> Interesting. I can't think of anything in that area which changed, and
> pre8 is being used on at least one very high volume system with multiple
> machines (which is where the most recent changes were checked out). That
> one is doing mostly receive, though. I'm not sure how much transmit it
> does.
>
> Are you sure you only have one version of spandsp on your machine?
> Software building against one set of files, but running against another
> set has been a common cause of trouble.
>
> Steve
>
fixed. needed cw rebuild against pre8.
BTW, it looks like compatibility issues with my providers Huawei switch or
PSTN fax terminators rised to up to 50% since pre2 -> pre5,6,7 here...
Apr 25 15:55:57 VERBOSE[3052583824] logger.c: -- Executing
[...@faxserver:5] NoOp("SIP/xxxxx-de-e6eb", "TX: PHASEESTATUS is 21")
Apr 25 15:55:57 VERBOSE[3052583824] logger.c: -- Executing
[...@faxserver:6] NoOp("SIP/xxxxx-de-e6eb", "TX: PHASEESTRING is No response
after sending a page")
The peer mailed me the result in paper, peer machine got half a page only
instead of 4.
will debug this. CW T.38 -> Provider's Huawei SoftX3000 T.38 PSTN-gateway ->
fax machines.
which debug option to set in CLI? I fear my slow PII 266 cannot handle full
UDPTL debug flood.
y
tom
_______________________________________________
Callweaver-dev mailing list
[email protected]
http://lists.callweaver.org/mailman/listinfo/callweaver-dev
