Max, thanks for the reply. I thought that might be the case, but since I have T.38 enabled on the Lucent does that point to an incompatibility with the unit? The firmware running on the unit is from only a few months back, so that seems surprising.
CtRiX wrote: > Mik Cheez wrote: >> I've been running through setting up T.38 termination via SIP using the >> instructions on the following: >> http://www.callweaver.org/wiki/Faxing+With+CallWeaver >> >> I continue to get the same 488 message, but strangely the fax does >> manage to go through. I've included the dump file 'full' and ethereal >> file 'ethereal.pcap' at the following location: >> >> ftp://callweaver_devel:[EMAIL PROTECTED] >> > > There are no errors here. > > If you enabled sip debug, you'd have noticed that the T38 reinvite has > been rejected (488) so the fax proceeds with RTP. > > That Lucent-Universal-Gateway is not so universal or doesn't support T38. > > Max > > _______________________________________________ > Callweaver-dev mailing list > [email protected] > http://lists.callweaver.org/mailman/listinfo/callweaver-dev > > _______________________________________________ Callweaver-dev mailing list [email protected] http://lists.callweaver.org/mailman/listinfo/callweaver-dev
