The Buildbot has detected a new failure on builder PPC64LE Fedora Rawhide
Refleaks 3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/#/builders/300/builds/1182
Buildbot URL: https://buildbot.python.org/
Worker for this Build: cstratak-fedora-rawhide-ppc64le
Build Reason: <unknown>
Blamelist: Mark Shannon <[email protected]>, Serhiy Storchaka <[email protected]>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
Note: switching to 'f88c14d412522587085ae039ebe70b91d5b4e226'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f88c14d4125 gh-122981: Fix inspect.getsource() for generated
classes with Python base classes (GH-123001)
Switched to and reset branch 'main'
configure: WARNING: no system libmpdecimal found; falling back to bundled
libmpdecimal (deprecated and scheduled for removal in Python 3.15)
./Modules/blake2module.c: In function ‘type_to_impl’:
./Modules/blake2module.c:314:18: warning: unused variable ‘st’
[-Wunused-variable]
314 | Blake2State* st = blake2_get_state_from_type(type);
| ^~
make: *** [Makefile:2304: buildbottest] Error 2
Test report
===========
Failed tests:
- test_dataclasses
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder PPC64LE Fedora
Rawhide NoGIL refleaks 3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/#/builders/1540/builds/80
Buildbot URL: https://buildbot.python.org/
Worker for this Build: cstratak-fedora-rawhide-ppc64le
Build Reason: <unknown>
Blamelist: AN Long <[email protected]>, Adam Turner
<[email protected]>, Alex Waygood
<[email protected]>, Ali Hamdan <[email protected]>, Ali Tavallaie
<[email protected]>, Alyssa Coghlan <[email protected]>,
Andreas Stocker <[email protected]>, Andrey Mishchenko
<[email protected]>, AraHaan <[email protected]>, Barney Gale
<[email protected]>, Bas Bloemsaat <[email protected]>, Bernhard M.
Wiedemann <[email protected]>, Bradley Reynolds <[email protected]>,
Brandt Bucher <[email protected]>, Brett Cannon <[email protected]>,
Bruno Lima <[email protected]>, Bénédikt Tran
<[email protected]>, CBerJun
<[email protected]>, CF Bolz-Tereick <[email protected]>,
Carol Willing <[email protected]>, Clinton
<[email protected]>, Cody Maloney
<[email protected]>, Damien <[email protected]
.github.com>, Dino Viehland <[email protected]>, Dominic H
<[email protected]>, Donghee Na <[email protected]>, Eddie Elizondo
<[email protected]>, Eric Snow <[email protected]>, Erlend E.
Aasland <[email protected]>, Francisco Kurucz <[email protected]>, Gabriele
N. Tornetta <[email protected]>, Gregor
<[email protected]>, HarryLHW <[email protected]>,
Hood Chatham <[email protected]>, Hugo van Kemenade
<[email protected]>, Irit Katriel
<[email protected]>, Jakub Kulík
<[email protected]>, James <[email protected]>, Jan Musílek
<[email protected]>, Jason R. Coombs <[email protected]>, Jelle Zijlstra
<[email protected]>, Jeremy Hylton
<[email protected]>, John Riggles
<[email protected]>, Jonathan Protzenko <[email protected]>, Jonathon
Vandezande <[email protected]>, Jongbum Won <[email protected]
y.github.com>, Josh Brobst <[email protected]>, Karolina Surma
<[email protected]>, Ken Jin <[email protected]>,
Kirill Podoprigora <[email protected]>, Kumar Aditya
<[email protected]>, Libor Martínek <[email protected]>, Lucas Esposito
<[email protected]>, Lysandros Nikolaou
<[email protected]>, Malcolm Smith <[email protected]>, Marc Mueller
<[email protected]>, Mark Shannon <[email protected]>,
Marta Gómez Macías <[email protected]>, Mateusz Nowak
<[email protected]>, Matth-M
<[email protected]>, Matthieu Caneill
<[email protected]>, Max Muoto <[email protected]>, Michael
<[email protected]>, Michael Droettboom
<[email protected]>, Mikołaj Kuranowski <[email protected]>, Milan Oberkirch
<[email protected]>, Miro Hrončok <[email protected]>, Nate Ohlson
<[email protected]>, Nate Ohlson <[email protected]>, Ne
d Deily <[email protected]>, Nice Zombies <[email protected]>, Nico Mexis
<[email protected]>, Pablo Galindo Salgado <[email protected]>, Pedro
Lacerda <[email protected]>, Peter Bierma
<[email protected]>, Petr Viktorin <[email protected]>, Pradyun Gedam
<[email protected]>, Rafael Fontenelle
<[email protected]>, Raymond Hettinger
<[email protected]>, Rodrigo Girão Serrão
<[email protected]>, Rodrigo Oliveira
<[email protected]>, Russell Keith-Magee <[email protected]>, Sam Gross
<[email protected]>, Samuel Thibault <[email protected]>,
Sebastian Rittau <[email protected]>, Sergey B Kirpichev
<[email protected]>, Serhiy Storchaka <[email protected]>, Seth Michael
Larson <[email protected]>, Shantanu
<[email protected]>, Subrahmanya Gaonkar
<[email protected]>, Sviatoslav Sydorenko (Свят�
�слав Сидоренко) <[email protected]>, Sviatoslav Sydorenko
(Святослав Сидоренко) <[email protected]>, Terry Jan Reedy
<[email protected]>, Thomas Grainger <[email protected]>, Tian Gao
<[email protected]>, Timon Viola
<[email protected]>, Tomas R
<[email protected]>, Trey Hunner <[email protected]>, Ulrik Södergren
<[email protected]>, Victor Stinner <[email protected]>, Ville
Skyttä <[email protected]>, Vlastimil Zíma <[email protected]>,
WilliamRoyNelson <[email protected]>, Wim Jeantine-Glenn
<[email protected]>, Wulian <[email protected]>, Wulian233 <[email protected]>,
Xie Yanbo <[email protected]>, Yuxin Wu <[email protected]>, Zachary Ware
<[email protected]>, dependabot[bot]
<49699333+dependabot[bot]@users.noreply.github.com>, edson duarte
<[email protected]>, jianghuyiyuan <[email protected]>, mathysEthical
<[email protected]
eply.github.com>, mirelagrigoras
<[email protected]>, mpage <[email protected]>,
neonene <[email protected]>, pukkandan
<[email protected]>, satori1995
<[email protected]>, saucoide
<[email protected]>, scottwoodall
<[email protected]>, smij720
<[email protected]>, sobolevn <[email protected]>,
Łukasz Langa <[email protected]>, Виталий Дмитриев <[email protected]>
BUILD FAILED: failed test (failure) (timed out)
Summary of the results of the build (if available):
===================================================
Captured traceback
==================
remote: Enumerating objects: 57, done.
remote: Counting objects: 1% (1/55)
remote: Counting objects: 3% (2/55)
remote: Counting objects: 5% (3/55)
remote: Counting objects: 7% (4/55)
remote: Counting objects: 9% (5/55)
remote: Counting objects: 10% (6/55)
remote: Counting objects: 12% (7/55)
remote: Counting objects: 14% (8/55)
remote: Counting objects: 16% (9/55)
remote: Counting objects: 18% (10/55)
remote: Counting objects: 20% (11/55)
remote: Counting objects: 21% (12/55)
remote: Counting objects: 23% (13/55)
remote: Counting objects: 25% (14/55)
remote: Counting objects: 27% (15/55)
remote: Counting objects: 29% (16/55)
remote: Counting objects: 30% (17/55)
remote: Counting objects: 32% (18/55)
remote: Counting objects: 34% (19/55)
remote: Counting objects: 36% (20/55)
remote: Counting objects: 38% (21/55)
remote: Counting objects: 40% (22/55)
remote: Counting objects: 41% (23/55)
remote: Counting objects: 43% (24/55)
remote: Counting objects: 45% (25/55)
remote: Counting objects: 47% (26/55)
remote: Counting objects: 49% (27/55)
remote: Counting objects: 50% (28/55)
remote: Counting objects: 52% (29/55)
remote: Counting objects: 54% (30/55)
remote: Counting objects: 56% (31/55)
remote: Counting objects: 58% (32/55)
remote: Counting objects: 60% (33/55)
remote: Counting objects: 61% (34/55)
remote: Counting objects: 63% (35/55)
remote: Counting objects: 65% (36/55)
remote: Counting objects: 67% (37/55)
remote: Counting objects: 69% (38/55)
remote: Counting objects: 70% (39/55)
remote: Counting objects: 72% (40/55)
remote: Counting objects: 74% (41/55)
remote: Counting objects: 76% (42/55)
remote: Counting objects: 78% (43/55)
remote: Counting objects: 80% (44/55)
remote: Counting objects: 81% (45/55)
remote: Counting objects: 83% (46/55)
remote: Counting objects: 85% (47/55)
remote: Counting objects: 87% (48/55)
remote: Counting objects: 89% (49/55)
remote: Counting objects: 90% (50/55)
remote: Counting objects: 92% (51/55)
remote: Counting objects: 94% (52/55)
remote: Counting objects: 96% (53/55)
remote: Counting objects: 98% (54/55)
remote: Counting objects: 100% (55/55)
remote: Counting objects: 100% (55/55), done.
remote: Compressing objects: 2% (1/50)
remote: Compressing objects: 4% (2/50)
remote: Compressing objects: 6% (3/50)
remote: Compressing objects: 8% (4/50)
remote: Compressing objects: 10% (5/50)
remote: Compressing objects: 12% (6/50)
remote: Compressing objects: 14% (7/50)
remote: Compressing objects: 16% (8/50)
remote: Compressing objects: 18% (9/50)
remote: Compressing objects: 20% (10/50)
remote: Compressing objects: 22% (11/50)
remote: Compressing objects: 24% (12/50)
remote: Compressing objects: 26% (13/50)
remote: Compressing objects: 28% (14/50)
remote: Compressing objects: 30% (15/50)
remote: Compressing objects: 32% (16/50)
remote: Compressing objects: 34% (17/50)
remote: Compressing objects: 36% (18/50)
remote: Compressing objects: 38% (19/50)
remote: Compressing objects: 40% (20/50)
remote: Compressing objects: 42% (21/50)
remote: Compressing objects: 44% (22/50)
remote: Compressing objects: 46% (23/50)
remote: Compressing objects: 48% (24/50)
remote: Compressing objects: 50% (25/50)
remote: Compressing objects: 52% (26/50)
remote: Compressing objects: 54% (27/50)
remote: Compressing objects: 56% (28/50)
remote: Compressing objects: 58% (29/50)
remote: Compressing objects: 60% (30/50)
remote: Compressing objects: 62% (31/50)
remote: Compressing objects: 64% (32/50)
remote: Compressing objects: 66% (33/50)
remote: Compressing objects: 68% (34/50)
remote: Compressing objects: 70% (35/50)
remote: Compressing objects: 72% (36/50)
remote: Compressing objects: 74% (37/50)
remote: Compressing objects: 76% (38/50)
remote: Compressing objects: 78% (39/50)
remote: Compressing objects: 80% (40/50)
remote: Compressing objects: 82% (41/50)
remote: Compressing objects: 84% (42/50)
remote: Compressing objects: 86% (43/50)
remote: Compressing objects: 88% (44/50)
remote: Compressing objects: 90% (45/50)
remote: Compressing objects: 92% (46/50)
remote: Compressing objects: 94% (47/50)
remote: Compressing objects: 96% (48/50)
remote: Compressing objects: 98% (49/50)
remote: Compressing objects: 100% (50/50)
remote: Compressing objects: 100% (50/50), done.
remote: Total 57 (delta 14), reused 20 (delta 5), pack-reused 2 (from 1)
>From https://github.com/python/cpython
* branch main -> FETCH_HEAD
Note: switching to 'f88c14d412522587085ae039ebe70b91d5b4e226'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f88c14d4125 gh-122981: Fix inspect.getsource() for generated
classes with Python base classes (GH-123001)
Switched to and reset branch 'main'
configure: WARNING: no system libmpdecimal found; falling back to bundled
libmpdecimal (deprecated and scheduled for removal in Python 3.15)
./Modules/blake2module.c: In function ‘type_to_impl’:
./Modules/blake2module.c:314:18: warning: unused variable ‘st’
[-Wunused-variable]
314 | Blake2State* st = blake2_get_state_from_type(type);
| ^~
make: *** [Makefile:2304: buildbottest] Terminated
Test report
===========
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder AMD64 Fedora
Rawhide Refleaks 3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/#/builders/565/builds/1191
Buildbot URL: https://buildbot.python.org/
Worker for this Build: cstratak-fedora-rawhide-x86_64
Build Reason: <unknown>
Blamelist: AN Long <[email protected]>, Adam Turner
<[email protected]>, Alex Waygood
<[email protected]>, Ali Hamdan <[email protected]>, Ali Tavallaie
<[email protected]>, Alyssa Coghlan <[email protected]>,
Andreas Stocker <[email protected]>, Andrey Mishchenko
<[email protected]>, AraHaan <[email protected]>, Barney Gale
<[email protected]>, Bas Bloemsaat <[email protected]>, Bernhard M.
Wiedemann <[email protected]>, Bradley Reynolds <[email protected]>,
Brandt Bucher <[email protected]>, Brett Cannon <[email protected]>,
Bruno Lima <[email protected]>, Bénédikt Tran
<[email protected]>, CBerJun
<[email protected]>, CF Bolz-Tereick <[email protected]>,
Carol Willing <[email protected]>, Clinton
<[email protected]>, Cody Maloney
<[email protected]>, Damien <[email protected]
.github.com>, Dino Viehland <[email protected]>, Dominic H
<[email protected]>, Donghee Na <[email protected]>, Eddie Elizondo
<[email protected]>, Eric Snow <[email protected]>, Erlend E.
Aasland <[email protected]>, Francisco Kurucz <[email protected]>, Gabriele
N. Tornetta <[email protected]>, Gregor
<[email protected]>, HarryLHW <[email protected]>,
Hood Chatham <[email protected]>, Hugo van Kemenade
<[email protected]>, Irit Katriel
<[email protected]>, Jakub Kulík
<[email protected]>, James <[email protected]>, Jan Musílek
<[email protected]>, Jason R. Coombs <[email protected]>, Jelle Zijlstra
<[email protected]>, Jeremy Hylton
<[email protected]>, John Riggles
<[email protected]>, Jonathan Protzenko <[email protected]>, Jonathon
Vandezande <[email protected]>, Jongbum Won <[email protected]
y.github.com>, Josh Brobst <[email protected]>, Karolina Surma
<[email protected]>, Ken Jin <[email protected]>,
Kirill Podoprigora <[email protected]>, Kumar Aditya
<[email protected]>, Libor Martínek <[email protected]>, Lucas Esposito
<[email protected]>, Lysandros Nikolaou
<[email protected]>, Malcolm Smith <[email protected]>, Marc Mueller
<[email protected]>, Mark Shannon <[email protected]>,
Marta Gómez Macías <[email protected]>, Mateusz Nowak
<[email protected]>, Matth-M
<[email protected]>, Matthieu Caneill
<[email protected]>, Max Muoto <[email protected]>, Michael
<[email protected]>, Michael Droettboom
<[email protected]>, Mikołaj Kuranowski <[email protected]>, Milan Oberkirch
<[email protected]>, Miro Hrončok <[email protected]>, Nate Ohlson
<[email protected]>, Nate Ohlson <[email protected]>, Ne
d Deily <[email protected]>, Nice Zombies <[email protected]>, Nico Mexis
<[email protected]>, Pablo Galindo Salgado <[email protected]>, Pedro
Lacerda <[email protected]>, Peter Bierma
<[email protected]>, Petr Viktorin <[email protected]>, Pradyun Gedam
<[email protected]>, Rafael Fontenelle
<[email protected]>, Raymond Hettinger
<[email protected]>, Rodrigo Girão Serrão
<[email protected]>, Rodrigo Oliveira
<[email protected]>, Russell Keith-Magee <[email protected]>, Sam Gross
<[email protected]>, Samuel Thibault <[email protected]>,
Sebastian Rittau <[email protected]>, Sergey B Kirpichev
<[email protected]>, Serhiy Storchaka <[email protected]>, Seth Michael
Larson <[email protected]>, Shantanu
<[email protected]>, Subrahmanya Gaonkar
<[email protected]>, Sviatoslav Sydorenko (Свят�
�слав Сидоренко) <[email protected]>, Sviatoslav Sydorenko
(Святослав Сидоренко) <[email protected]>, Terry Jan Reedy
<[email protected]>, Thomas Grainger <[email protected]>, Tian Gao
<[email protected]>, Timon Viola
<[email protected]>, Tomas R
<[email protected]>, Trey Hunner <[email protected]>, Ulrik Södergren
<[email protected]>, Victor Stinner <[email protected]>, Ville
Skyttä <[email protected]>, Vlastimil Zíma <[email protected]>,
WilliamRoyNelson <[email protected]>, Wim Jeantine-Glenn
<[email protected]>, Wulian <[email protected]>, Wulian233 <[email protected]>,
Xie Yanbo <[email protected]>, Yuxin Wu <[email protected]>, Zachary Ware
<[email protected]>, dependabot[bot]
<49699333+dependabot[bot]@users.noreply.github.com>, edson duarte
<[email protected]>, jianghuyiyuan <[email protected]>, mathysEthical
<[email protected]
eply.github.com>, mirelagrigoras
<[email protected]>, mpage <[email protected]>,
neonene <[email protected]>, pukkandan
<[email protected]>, satori1995
<[email protected]>, saucoide
<[email protected]>, scottwoodall
<[email protected]>, smij720
<[email protected]>, sobolevn <[email protected]>,
Łukasz Langa <[email protected]>, Виталий Дмитриев <[email protected]>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
remote: Enumerating objects: 55, done.
remote: Counting objects: 1% (1/53)
remote: Counting objects: 3% (2/53)
remote: Counting objects: 5% (3/53)
remote: Counting objects: 7% (4/53)
remote: Counting objects: 9% (5/53)
remote: Counting objects: 11% (6/53)
remote: Counting objects: 13% (7/53)
remote: Counting objects: 15% (8/53)
remote: Counting objects: 16% (9/53)
remote: Counting objects: 18% (10/53)
remote: Counting objects: 20% (11/53)
remote: Counting objects: 22% (12/53)
remote: Counting objects: 24% (13/53)
remote: Counting objects: 26% (14/53)
remote: Counting objects: 28% (15/53)
remote: Counting objects: 30% (16/53)
remote: Counting objects: 32% (17/53)
remote: Counting objects: 33% (18/53)
remote: Counting objects: 35% (19/53)
remote: Counting objects: 37% (20/53)
remote: Counting objects: 39% (21/53)
remote: Counting objects: 41% (22/53)
remote: Counting objects: 43% (23/53)
remote: Counting objects: 45% (24/53)
remote: Counting objects: 47% (25/53)
remote: Counting objects: 49% (26/53)
remote: Counting objects: 50% (27/53)
remote: Counting objects: 52% (28/53)
remote: Counting objects: 54% (29/53)
remote: Counting objects: 56% (30/53)
remote: Counting objects: 58% (31/53)
remote: Counting objects: 60% (32/53)
remote: Counting objects: 62% (33/53)
remote: Counting objects: 64% (34/53)
remote: Counting objects: 66% (35/53)
remote: Counting objects: 67% (36/53)
remote: Counting objects: 69% (37/53)
remote: Counting objects: 71% (38/53)
remote: Counting objects: 73% (39/53)
remote: Counting objects: 75% (40/53)
remote: Counting objects: 77% (41/53)
remote: Counting objects: 79% (42/53)
remote: Counting objects: 81% (43/53)
remote: Counting objects: 83% (44/53)
remote: Counting objects: 84% (45/53)
remote: Counting objects: 86% (46/53)
remote: Counting objects: 88% (47/53)
remote: Counting objects: 90% (48/53)
remote: Counting objects: 92% (49/53)
remote: Counting objects: 94% (50/53)
remote: Counting objects: 96% (51/53)
remote: Counting objects: 98% (52/53)
remote: Counting objects: 100% (53/53)
remote: Counting objects: 100% (53/53), done.
remote: Compressing objects: 2% (1/48)
remote: Compressing objects: 4% (2/48)
remote: Compressing objects: 6% (3/48)
remote: Compressing objects: 8% (4/48)
remote: Compressing objects: 10% (5/48)
remote: Compressing objects: 12% (6/48)
remote: Compressing objects: 14% (7/48)
remote: Compressing objects: 16% (8/48)
remote: Compressing objects: 18% (9/48)
remote: Compressing objects: 20% (10/48)
remote: Compressing objects: 22% (11/48)
remote: Compressing objects: 25% (12/48)
remote: Compressing objects: 27% (13/48)
remote: Compressing objects: 29% (14/48)
remote: Compressing objects: 31% (15/48)
remote: Compressing objects: 33% (16/48)
remote: Compressing objects: 35% (17/48)
remote: Compressing objects: 37% (18/48)
remote: Compressing objects: 39% (19/48)
remote: Compressing objects: 41% (20/48)
remote: Compressing objects: 43% (21/48)
remote: Compressing objects: 45% (22/48)
remote: Compressing objects: 47% (23/48)
remote: Compressing objects: 50% (24/48)
remote: Compressing objects: 52% (25/48)
remote: Compressing objects: 54% (26/48)
remote: Compressing objects: 56% (27/48)
remote: Compressing objects: 58% (28/48)
remote: Compressing objects: 60% (29/48)
remote: Compressing objects: 62% (30/48)
remote: Compressing objects: 64% (31/48)
remote: Compressing objects: 66% (32/48)
remote: Compressing objects: 68% (33/48)
remote: Compressing objects: 70% (34/48)
remote: Compressing objects: 72% (35/48)
remote: Compressing objects: 75% (36/48)
remote: Compressing objects: 77% (37/48)
remote: Compressing objects: 79% (38/48)
remote: Compressing objects: 81% (39/48)
remote: Compressing objects: 83% (40/48)
remote: Compressing objects: 85% (41/48)
remote: Compressing objects: 87% (42/48)
remote: Compressing objects: 89% (43/48)
remote: Compressing objects: 91% (44/48)
remote: Compressing objects: 93% (45/48)
remote: Compressing objects: 95% (46/48)
remote: Compressing objects: 97% (47/48)
remote: Compressing objects: 100% (48/48)
remote: Compressing objects: 100% (48/48), done.
remote: Total 55 (delta 16), reused 24 (delta 5), pack-reused 2 (from 1)
>From https://github.com/python/cpython
* branch main -> FETCH_HEAD
Note: switching to 'f88c14d412522587085ae039ebe70b91d5b4e226'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f88c14d4125 gh-122981: Fix inspect.getsource() for generated
classes with Python base classes (GH-123001)
Switched to and reset branch 'main'
configure: WARNING: no system libmpdecimal found; falling back to bundled
libmpdecimal (deprecated and scheduled for removal in Python 3.15)
make: *** [Makefile:2304: buildbottest] Error 2
Test report
===========
Failed tests:
- test_dataclasses
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder PPC64LE RHEL8
Refleaks 3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/#/builders/384/builds/1218
Buildbot URL: https://buildbot.python.org/
Worker for this Build: cstratak-RHEL8-ppc64le
Build Reason: <unknown>
Blamelist: Mark Shannon <[email protected]>, Serhiy Storchaka <[email protected]>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
remote: Enumerating objects: 43, done.
remote: Counting objects: 2% (1/41)
remote: Counting objects: 4% (2/41)
remote: Counting objects: 7% (3/41)
remote: Counting objects: 9% (4/41)
remote: Counting objects: 12% (5/41)
remote: Counting objects: 14% (6/41)
remote: Counting objects: 17% (7/41)
remote: Counting objects: 19% (8/41)
remote: Counting objects: 21% (9/41)
remote: Counting objects: 24% (10/41)
remote: Counting objects: 26% (11/41)
remote: Counting objects: 29% (12/41)
remote: Counting objects: 31% (13/41)
remote: Counting objects: 34% (14/41)
remote: Counting objects: 36% (15/41)
remote: Counting objects: 39% (16/41)
remote: Counting objects: 41% (17/41)
remote: Counting objects: 43% (18/41)
remote: Counting objects: 46% (19/41)
remote: Counting objects: 48% (20/41)
remote: Counting objects: 51% (21/41)
remote: Counting objects: 53% (22/41)
remote: Counting objects: 56% (23/41)
remote: Counting objects: 58% (24/41)
remote: Counting objects: 60% (25/41)
remote: Counting objects: 63% (26/41)
remote: Counting objects: 65% (27/41)
remote: Counting objects: 68% (28/41)
remote: Counting objects: 70% (29/41)
remote: Counting objects: 73% (30/41)
remote: Counting objects: 75% (31/41)
remote: Counting objects: 78% (32/41)
remote: Counting objects: 80% (33/41)
remote: Counting objects: 82% (34/41)
remote: Counting objects: 85% (35/41)
remote: Counting objects: 87% (36/41)
remote: Counting objects: 90% (37/41)
remote: Counting objects: 92% (38/41)
remote: Counting objects: 95% (39/41)
remote: Counting objects: 97% (40/41)
remote: Counting objects: 100% (41/41)
remote: Counting objects: 100% (41/41), done.
remote: Compressing objects: 2% (1/36)
remote: Compressing objects: 5% (2/36)
remote: Compressing objects: 8% (3/36)
remote: Compressing objects: 11% (4/36)
remote: Compressing objects: 13% (5/36)
remote: Compressing objects: 16% (6/36)
remote: Compressing objects: 19% (7/36)
remote: Compressing objects: 22% (8/36)
remote: Compressing objects: 25% (9/36)
remote: Compressing objects: 27% (10/36)
remote: Compressing objects: 30% (11/36)
remote: Compressing objects: 33% (12/36)
remote: Compressing objects: 36% (13/36)
remote: Compressing objects: 38% (14/36)
remote: Compressing objects: 41% (15/36)
remote: Compressing objects: 44% (16/36)
remote: Compressing objects: 47% (17/36)
remote: Compressing objects: 50% (18/36)
remote: Compressing objects: 52% (19/36)
remote: Compressing objects: 55% (20/36)
remote: Compressing objects: 58% (21/36)
remote: Compressing objects: 61% (22/36)
remote: Compressing objects: 63% (23/36)
remote: Compressing objects: 66% (24/36)
remote: Compressing objects: 69% (25/36)
remote: Compressing objects: 72% (26/36)
remote: Compressing objects: 75% (27/36)
remote: Compressing objects: 77% (28/36)
remote: Compressing objects: 80% (29/36)
remote: Compressing objects: 83% (30/36)
remote: Compressing objects: 86% (31/36)
remote: Compressing objects: 88% (32/36)
remote: Compressing objects: 91% (33/36)
remote: Compressing objects: 94% (34/36)
remote: Compressing objects: 97% (35/36)
remote: Compressing objects: 100% (36/36)
remote: Compressing objects: 100% (36/36), done.
remote: Total 43 (delta 9), reused 19 (delta 5), pack-reused 2 (from 1)
>From https://github.com/python/cpython
* branch main -> FETCH_HEAD
Note: switching to 'f88c14d412522587085ae039ebe70b91d5b4e226'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f88c14d4125 gh-122981: Fix inspect.getsource() for generated
classes with Python base classes (GH-123001)
Switched to and reset branch 'main'
configure: WARNING: no system libmpdecimal found; falling back to bundled
libmpdecimal (deprecated and scheduled for removal in Python 3.15)
./Modules/blake2module.c: In function ‘type_to_impl’:
./Modules/blake2module.c:314:18: warning: unused variable ‘st’
[-Wunused-variable]
Blake2State* st = blake2_get_state_from_type(type);
^~
make: *** [Makefile:2304: buildbottest] Error 2
Test report
===========
Failed tests:
- test_dataclasses
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder PPC64LE Fedora
Stable Refleaks 3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/#/builders/280/builds/1165
Buildbot URL: https://buildbot.python.org/
Worker for this Build: cstratak-fedora-stable-ppc64le
Build Reason: <unknown>
Blamelist: Mark Shannon <[email protected]>, Serhiy Storchaka <[email protected]>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
remote: Enumerating objects: 43, done.
remote: Counting objects: 2% (1/41)
remote: Counting objects: 4% (2/41)
remote: Counting objects: 7% (3/41)
remote: Counting objects: 9% (4/41)
remote: Counting objects: 12% (5/41)
remote: Counting objects: 14% (6/41)
remote: Counting objects: 17% (7/41)
remote: Counting objects: 19% (8/41)
remote: Counting objects: 21% (9/41)
remote: Counting objects: 24% (10/41)
remote: Counting objects: 26% (11/41)
remote: Counting objects: 29% (12/41)
remote: Counting objects: 31% (13/41)
remote: Counting objects: 34% (14/41)
remote: Counting objects: 36% (15/41)
remote: Counting objects: 39% (16/41)
remote: Counting objects: 41% (17/41)
remote: Counting objects: 43% (18/41)
remote: Counting objects: 46% (19/41)
remote: Counting objects: 48% (20/41)
remote: Counting objects: 51% (21/41)
remote: Counting objects: 53% (22/41)
remote: Counting objects: 56% (23/41)
remote: Counting objects: 58% (24/41)
remote: Counting objects: 60% (25/41)
remote: Counting objects: 63% (26/41)
remote: Counting objects: 65% (27/41)
remote: Counting objects: 68% (28/41)
remote: Counting objects: 70% (29/41)
remote: Counting objects: 73% (30/41)
remote: Counting objects: 75% (31/41)
remote: Counting objects: 78% (32/41)
remote: Counting objects: 80% (33/41)
remote: Counting objects: 82% (34/41)
remote: Counting objects: 85% (35/41)
remote: Counting objects: 87% (36/41)
remote: Counting objects: 90% (37/41)
remote: Counting objects: 92% (38/41)
remote: Counting objects: 95% (39/41)
remote: Counting objects: 97% (40/41)
remote: Counting objects: 100% (41/41)
remote: Counting objects: 100% (41/41), done.
remote: Compressing objects: 2% (1/36)
remote: Compressing objects: 5% (2/36)
remote: Compressing objects: 8% (3/36)
remote: Compressing objects: 11% (4/36)
remote: Compressing objects: 13% (5/36)
remote: Compressing objects: 16% (6/36)
remote: Compressing objects: 19% (7/36)
remote: Compressing objects: 22% (8/36)
remote: Compressing objects: 25% (9/36)
remote: Compressing objects: 27% (10/36)
remote: Compressing objects: 30% (11/36)
remote: Compressing objects: 33% (12/36)
remote: Compressing objects: 36% (13/36)
remote: Compressing objects: 38% (14/36)
remote: Compressing objects: 41% (15/36)
remote: Compressing objects: 44% (16/36)
remote: Compressing objects: 47% (17/36)
remote: Compressing objects: 50% (18/36)
remote: Compressing objects: 52% (19/36)
remote: Compressing objects: 55% (20/36)
remote: Compressing objects: 58% (21/36)
remote: Compressing objects: 61% (22/36)
remote: Compressing objects: 63% (23/36)
remote: Compressing objects: 66% (24/36)
remote: Compressing objects: 69% (25/36)
remote: Compressing objects: 72% (26/36)
remote: Compressing objects: 75% (27/36)
remote: Compressing objects: 77% (28/36)
remote: Compressing objects: 80% (29/36)
remote: Compressing objects: 83% (30/36)
remote: Compressing objects: 86% (31/36)
remote: Compressing objects: 88% (32/36)
remote: Compressing objects: 91% (33/36)
remote: Compressing objects: 94% (34/36)
remote: Compressing objects: 97% (35/36)
remote: Compressing objects: 100% (36/36)
remote: Compressing objects: 100% (36/36), done.
remote: Total 43 (delta 9), reused 19 (delta 5), pack-reused 2 (from 1)
>From https://github.com/python/cpython
* branch main -> FETCH_HEAD
Note: switching to 'f88c14d412522587085ae039ebe70b91d5b4e226'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f88c14d4125 gh-122981: Fix inspect.getsource() for generated
classes with Python base classes (GH-123001)
Switched to and reset branch 'main'
configure: WARNING: no system libmpdecimal found; falling back to bundled
libmpdecimal (deprecated and scheduled for removal in Python 3.15)
./Modules/blake2module.c: In function ‘type_to_impl’:
./Modules/blake2module.c:314:18: warning: unused variable ‘st’
[-Wunused-variable]
314 | Blake2State* st = blake2_get_state_from_type(type);
| ^~
make: *** [Makefile:2304: buildbottest] Error 2
Test report
===========
Failed tests:
- test_dataclasses
Sincerely,
-The Buildbot
_______________________________________________
Buildbot-status mailing list -- [email protected]
To unsubscribe send an email to [email protected]
https://mail.python.org/mailman3/lists/buildbot-status.python.org/
Member address: [email protected]
