The Buildbot has detected a new failure on builder PPC64LE RHEL7 LTO 3.x while
building python/cpython.
Full details are available at:
https://buildbot.python.org/#/builders/503/builds/5267
Buildbot URL: https://buildbot.python.org/
Worker for this Build: cstratak-RHEL7-ppc64le
Build Reason: <unknown>
Blamelist: Eric Snow <[email protected]>, Jonathan Protzenko
<[email protected]>
BUILD FAILED: failed compile (failure)
Summary of the results of the build (if available):
===================================================
Captured traceback
==================
remote: Enumerating objects: 73, done.
remote: Counting objects: 1% (1/63)
remote: Counting objects: 3% (2/63)
remote: Counting objects: 4% (3/63)
remote: Counting objects: 6% (4/63)
remote: Counting objects: 7% (5/63)
remote: Counting objects: 9% (6/63)
remote: Counting objects: 11% (7/63)
remote: Counting objects: 12% (8/63)
remote: Counting objects: 14% (9/63)
remote: Counting objects: 15% (10/63)
remote: Counting objects: 17% (11/63)
remote: Counting objects: 19% (12/63)
remote: Counting objects: 20% (13/63)
remote: Counting objects: 22% (14/63)
remote: Counting objects: 23% (15/63)
remote: Counting objects: 25% (16/63)
remote: Counting objects: 26% (17/63)
remote: Counting objects: 28% (18/63)
remote: Counting objects: 30% (19/63)
remote: Counting objects: 31% (20/63)
remote: Counting objects: 33% (21/63)
remote: Counting objects: 34% (22/63)
remote: Counting objects: 36% (23/63)
remote: Counting objects: 38% (24/63)
remote: Counting objects: 39% (25/63)
remote: Counting objects: 41% (26/63)
remote: Counting objects: 42% (27/63)
remote: Counting objects: 44% (28/63)
remote: Counting objects: 46% (29/63)
remote: Counting objects: 47% (30/63)
remote: Counting objects: 49% (31/63)
remote: Counting objects: 50% (32/63)
remote: Counting objects: 52% (33/63)
remote: Counting objects: 53% (34/63)
remote: Counting objects: 55% (35/63)
remote: Counting objects: 57% (36/63)
remote: Counting objects: 58% (37/63)
remote: Counting objects: 60% (38/63)
remote: Counting objects: 61% (39/63)
remote: Counting objects: 63% (40/63)
remote: Counting objects: 65% (41/63)
remote: Counting objects: 66% (42/63)
remote: Counting objects: 68% (43/63)
remote: Counting objects: 69% (44/63)
remote: Counting objects: 71% (45/63)
remote: Counting objects: 73% (46/63)
remote: Counting objects: 74% (47/63)
remote: Counting objects: 76% (48/63)
remote: Counting objects: 77% (49/63)
remote: Counting objects: 79% (50/63)
remote: Counting objects: 80% (51/63)
remote: Counting objects: 82% (52/63)
remote: Counting objects: 84% (53/63)
remote: Counting objects: 85% (54/63)
remote: Counting objects: 87% (55/63)
remote: Counting objects: 88% (56/63)
remote: Counting objects: 90% (57/63)
remote: Counting objects: 92% (58/63)
remote: Counting objects: 93% (59/63)
remote: Counting objects: 95% (60/63)
remote: Counting objects: 96% (61/63)
remote: Counting objects: 98% (62/63)
remote: Counting objects: 100% (63/63)
remote: Counting objects: 100% (63/63), done.
remote: Compressing objects: 1% (1/51)
remote: Compressing objects: 3% (2/51)
remote: Compressing objects: 5% (3/51)
remote: Compressing objects: 7% (4/51)
remote: Compressing objects: 9% (5/51)
remote: Compressing objects: 11% (6/51)
remote: Compressing objects: 13% (7/51)
remote: Compressing objects: 15% (8/51)
remote: Compressing objects: 17% (9/51)
remote: Compressing objects: 19% (10/51)
remote: Compressing objects: 21% (11/51)
remote: Compressing objects: 23% (12/51)
remote: Compressing objects: 25% (13/51)
remote: Compressing objects: 27% (14/51)
remote: Compressing objects: 29% (15/51)
remote: Compressing objects: 31% (16/51)
remote: Compressing objects: 33% (17/51)
remote: Compressing objects: 35% (18/51)
remote: Compressing objects: 37% (19/51)
remote: Compressing objects: 39% (20/51)
remote: Compressing objects: 41% (21/51)
remote: Compressing objects: 43% (22/51)
remote: Compressing objects: 45% (23/51)
remote: Compressing objects: 47% (24/51)
remote: Compressing objects: 49% (25/51)
remote: Compressing objects: 50% (26/51)
remote: Compressing objects: 52% (27/51)
remote: Compressing objects: 54% (28/51)
remote: Compressing objects: 56% (29/51)
remote: Compressing objects: 58% (30/51)
remote: Compressing objects: 60% (31/51)
remote: Compressing objects: 62% (32/51)
remote: Compressing objects: 64% (33/51)
remote: Compressing objects: 66% (34/51)
remote: Compressing objects: 68% (35/51)
remote: Compressing objects: 70% (36/51)
remote: Compressing objects: 72% (37/51)
remote: Compressing objects: 74% (38/51)
remote: Compressing objects: 76% (39/51)
remote: Compressing objects: 78% (40/51)
remote: Compressing objects: 80% (41/51)
remote: Compressing objects: 82% (42/51)
remote: Compressing objects: 84% (43/51)
remote: Compressing objects: 86% (44/51)
remote: Compressing objects: 88% (45/51)
remote: Compressing objects: 90% (46/51)
remote: Compressing objects: 92% (47/51)
remote: Compressing objects: 94% (48/51)
remote: Compressing objects: 96% (49/51)
remote: Compressing objects: 98% (50/51)
remote: Compressing objects: 100% (51/51)
remote: Compressing objects: 100% (51/51), done.
remote: Total 73 (delta 26), reused 19 (delta 12), pack-reused 10 (from 1)
>From https://github.com/python/cpython
* branch main -> FETCH_HEAD
Note: checking out '325e9b8ef400b86fb077aa40d5cb8cec6e4df7bb'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:
git checkout -b new_branch_name
HEAD is now at 325e9b8... gh-99108: Add HACL* Blake2 implementation to hashlib
(GH-119316)
Switched to and reset branch 'main'
configure: WARNING: no system libmpdecimal found; falling back to bundled
libmpdecimal (deprecated and scheduled for removal in Python 3.15)
./Modules/_hacl/Lib_Memzero0.c: In function ‘Lib_Memzero0_memzero0’:
./Modules/_hacl/Lib_Memzero0.c:43:5: error: implicit declaration of function
‘explicit_bzero’ [-Werror=implicit-function-declaration]
explicit_bzero(dst, len_);
^~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make: *** [Makefile:1531: Modules/_hacl/Lib_Memzero0.o] Error 1
make: *** Waiting for unfinished jobs....
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
make: [Makefile:3180: clean-retain-profile] Error 1 (ignored)
Test report
===========
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder PPC64LE RHEL7
LTO + PGO 3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/#/builders/43/builds/5692
Buildbot URL: https://buildbot.python.org/
Worker for this Build: cstratak-RHEL7-ppc64le
Build Reason: <unknown>
Blamelist: Eric Snow <[email protected]>, Jonathan Protzenko
<[email protected]>
BUILD FAILED: failed compile (failure)
Summary of the results of the build (if available):
===================================================
Captured traceback
==================
remote: Enumerating objects: 73, done.
remote: Counting objects: 1% (1/62)
remote: Counting objects: 3% (2/62)
remote: Counting objects: 4% (3/62)
remote: Counting objects: 6% (4/62)
remote: Counting objects: 8% (5/62)
remote: Counting objects: 9% (6/62)
remote: Counting objects: 11% (7/62)
remote: Counting objects: 12% (8/62)
remote: Counting objects: 14% (9/62)
remote: Counting objects: 16% (10/62)
remote: Counting objects: 17% (11/62)
remote: Counting objects: 19% (12/62)
remote: Counting objects: 20% (13/62)
remote: Counting objects: 22% (14/62)
remote: Counting objects: 24% (15/62)
remote: Counting objects: 25% (16/62)
remote: Counting objects: 27% (17/62)
remote: Counting objects: 29% (18/62)
remote: Counting objects: 30% (19/62)
remote: Counting objects: 32% (20/62)
remote: Counting objects: 33% (21/62)
remote: Counting objects: 35% (22/62)
remote: Counting objects: 37% (23/62)
remote: Counting objects: 38% (24/62)
remote: Counting objects: 40% (25/62)
remote: Counting objects: 41% (26/62)
remote: Counting objects: 43% (27/62)
remote: Counting objects: 45% (28/62)
remote: Counting objects: 46% (29/62)
remote: Counting objects: 48% (30/62)
remote: Counting objects: 50% (31/62)
remote: Counting objects: 51% (32/62)
remote: Counting objects: 53% (33/62)
remote: Counting objects: 54% (34/62)
remote: Counting objects: 56% (35/62)
remote: Counting objects: 58% (36/62)
remote: Counting objects: 59% (37/62)
remote: Counting objects: 61% (38/62)
remote: Counting objects: 62% (39/62)
remote: Counting objects: 64% (40/62)
remote: Counting objects: 66% (41/62)
remote: Counting objects: 67% (42/62)
remote: Counting objects: 69% (43/62)
remote: Counting objects: 70% (44/62)
remote: Counting objects: 72% (45/62)
remote: Counting objects: 74% (46/62)
remote: Counting objects: 75% (47/62)
remote: Counting objects: 77% (48/62)
remote: Counting objects: 79% (49/62)
remote: Counting objects: 80% (50/62)
remote: Counting objects: 82% (51/62)
remote: Counting objects: 83% (52/62)
remote: Counting objects: 85% (53/62)
remote: Counting objects: 87% (54/62)
remote: Counting objects: 88% (55/62)
remote: Counting objects: 90% (56/62)
remote: Counting objects: 91% (57/62)
remote: Counting objects: 93% (58/62)
remote: Counting objects: 95% (59/62)
remote: Counting objects: 96% (60/62)
remote: Counting objects: 98% (61/62)
remote: Counting objects: 100% (62/62)
remote: Counting objects: 100% (62/62), done.
remote: Compressing objects: 1% (1/51)
remote: Compressing objects: 3% (2/51)
remote: Compressing objects: 5% (3/51)
remote: Compressing objects: 7% (4/51)
remote: Compressing objects: 9% (5/51)
remote: Compressing objects: 11% (6/51)
remote: Compressing objects: 13% (7/51)
remote: Compressing objects: 15% (8/51)
remote: Compressing objects: 17% (9/51)
remote: Compressing objects: 19% (10/51)
remote: Compressing objects: 21% (11/51)
remote: Compressing objects: 23% (12/51)
remote: Compressing objects: 25% (13/51)
remote: Compressing objects: 27% (14/51)
remote: Compressing objects: 29% (15/51)
remote: Compressing objects: 31% (16/51)
remote: Compressing objects: 33% (17/51)
remote: Compressing objects: 35% (18/51)
remote: Compressing objects: 37% (19/51)
remote: Compressing objects: 39% (20/51)
remote: Compressing objects: 41% (21/51)
remote: Compressing objects: 43% (22/51)
remote: Compressing objects: 45% (23/51)
remote: Compressing objects: 47% (24/51)
remote: Compressing objects: 49% (25/51)
remote: Compressing objects: 50% (26/51)
remote: Compressing objects: 52% (27/51)
remote: Compressing objects: 54% (28/51)
remote: Compressing objects: 56% (29/51)
remote: Compressing objects: 58% (30/51)
remote: Compressing objects: 60% (31/51)
remote: Compressing objects: 62% (32/51)
remote: Compressing objects: 64% (33/51)
remote: Compressing objects: 66% (34/51)
remote: Compressing objects: 68% (35/51)
remote: Compressing objects: 70% (36/51)
remote: Compressing objects: 72% (37/51)
remote: Compressing objects: 74% (38/51)
remote: Compressing objects: 76% (39/51)
remote: Compressing objects: 78% (40/51)
remote: Compressing objects: 80% (41/51)
remote: Compressing objects: 82% (42/51)
remote: Compressing objects: 84% (43/51)
remote: Compressing objects: 86% (44/51)
remote: Compressing objects: 88% (45/51)
remote: Compressing objects: 90% (46/51)
remote: Compressing objects: 92% (47/51)
remote: Compressing objects: 94% (48/51)
remote: Compressing objects: 96% (49/51)
remote: Compressing objects: 98% (50/51)
remote: Compressing objects: 100% (51/51)
remote: Compressing objects: 100% (51/51), done.
remote: Total 73 (delta 25), reused 19 (delta 11), pack-reused 11 (from 1)
>From https://github.com/python/cpython
* branch main -> FETCH_HEAD
Note: checking out '325e9b8ef400b86fb077aa40d5cb8cec6e4df7bb'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:
git checkout -b new_branch_name
HEAD is now at 325e9b8... gh-99108: Add HACL* Blake2 implementation to hashlib
(GH-119316)
Switched to and reset branch 'main'
configure: WARNING: no system libmpdecimal found; falling back to bundled
libmpdecimal (deprecated and scheduled for removal in Python 3.15)
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
make[2]: [Makefile:3180: clean-retain-profile] Error 1 (ignored)
./Modules/_hacl/Lib_Memzero0.c: In function ‘Lib_Memzero0_memzero0’:
./Modules/_hacl/Lib_Memzero0.c:43:5: error: implicit declaration of function
‘explicit_bzero’ [-Werror=implicit-function-declaration]
explicit_bzero(dst, len_);
^~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make[2]: *** [Makefile:1531: Modules/_hacl/Lib_Memzero0.o] Error 1
make[2]: *** Waiting for unfinished jobs....
Python/Python-ast.c: In function ‘init_types’:
Python/Python-ast.c:5828:1: note: variable tracking size limit exceeded with
-fvar-tracking-assignments, retrying without
init_types(struct ast_state *state)
^~~~~~~~~~
make[1]: *** [Makefile:903: profile-gen-stamp] Error 2
make: *** [Makefile:915: profile-run-stamp] Error 2
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
make: [Makefile:3180: clean-retain-profile] Error 1 (ignored)
Test report
===========
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder PPC64LE RHEL7
3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/#/builders/446/builds/5239
Buildbot URL: https://buildbot.python.org/
Worker for this Build: cstratak-RHEL7-ppc64le
Build Reason: <unknown>
Blamelist: Eric Snow <[email protected]>, Jonathan Protzenko
<[email protected]>
BUILD FAILED: failed compile (failure)
Summary of the results of the build (if available):
===================================================
Captured traceback
==================
remote: Enumerating objects: 73, done.
remote: Counting objects: 1% (1/62)
remote: Counting objects: 3% (2/62)
remote: Counting objects: 4% (3/62)
remote: Counting objects: 6% (4/62)
remote: Counting objects: 8% (5/62)
remote: Counting objects: 9% (6/62)
remote: Counting objects: 11% (7/62)
remote: Counting objects: 12% (8/62)
remote: Counting objects: 14% (9/62)
remote: Counting objects: 16% (10/62)
remote: Counting objects: 17% (11/62)
remote: Counting objects: 19% (12/62)
remote: Counting objects: 20% (13/62)
remote: Counting objects: 22% (14/62)
remote: Counting objects: 24% (15/62)
remote: Counting objects: 25% (16/62)
remote: Counting objects: 27% (17/62)
remote: Counting objects: 29% (18/62)
remote: Counting objects: 30% (19/62)
remote: Counting objects: 32% (20/62)
remote: Counting objects: 33% (21/62)
remote: Counting objects: 35% (22/62)
remote: Counting objects: 37% (23/62)
remote: Counting objects: 38% (24/62)
remote: Counting objects: 40% (25/62)
remote: Counting objects: 41% (26/62)
remote: Counting objects: 43% (27/62)
remote: Counting objects: 45% (28/62)
remote: Counting objects: 46% (29/62)
remote: Counting objects: 48% (30/62)
remote: Counting objects: 50% (31/62)
remote: Counting objects: 51% (32/62)
remote: Counting objects: 53% (33/62)
remote: Counting objects: 54% (34/62)
remote: Counting objects: 56% (35/62)
remote: Counting objects: 58% (36/62)
remote: Counting objects: 59% (37/62)
remote: Counting objects: 61% (38/62)
remote: Counting objects: 62% (39/62)
remote: Counting objects: 64% (40/62)
remote: Counting objects: 66% (41/62)
remote: Counting objects: 67% (42/62)
remote: Counting objects: 69% (43/62)
remote: Counting objects: 70% (44/62)
remote: Counting objects: 72% (45/62)
remote: Counting objects: 74% (46/62)
remote: Counting objects: 75% (47/62)
remote: Counting objects: 77% (48/62)
remote: Counting objects: 79% (49/62)
remote: Counting objects: 80% (50/62)
remote: Counting objects: 82% (51/62)
remote: Counting objects: 83% (52/62)
remote: Counting objects: 85% (53/62)
remote: Counting objects: 87% (54/62)
remote: Counting objects: 88% (55/62)
remote: Counting objects: 90% (56/62)
remote: Counting objects: 91% (57/62)
remote: Counting objects: 93% (58/62)
remote: Counting objects: 95% (59/62)
remote: Counting objects: 96% (60/62)
remote: Counting objects: 98% (61/62)
remote: Counting objects: 100% (62/62)
remote: Counting objects: 100% (62/62), done.
remote: Compressing objects: 1% (1/51)
remote: Compressing objects: 3% (2/51)
remote: Compressing objects: 5% (3/51)
remote: Compressing objects: 7% (4/51)
remote: Compressing objects: 9% (5/51)
remote: Compressing objects: 11% (6/51)
remote: Compressing objects: 13% (7/51)
remote: Compressing objects: 15% (8/51)
remote: Compressing objects: 17% (9/51)
remote: Compressing objects: 19% (10/51)
remote: Compressing objects: 21% (11/51)
remote: Compressing objects: 23% (12/51)
remote: Compressing objects: 25% (13/51)
remote: Compressing objects: 27% (14/51)
remote: Compressing objects: 29% (15/51)
remote: Compressing objects: 31% (16/51)
remote: Compressing objects: 33% (17/51)
remote: Compressing objects: 35% (18/51)
remote: Compressing objects: 37% (19/51)
remote: Compressing objects: 39% (20/51)
remote: Compressing objects: 41% (21/51)
remote: Compressing objects: 43% (22/51)
remote: Compressing objects: 45% (23/51)
remote: Compressing objects: 47% (24/51)
remote: Compressing objects: 49% (25/51)
remote: Compressing objects: 50% (26/51)
remote: Compressing objects: 52% (27/51)
remote: Compressing objects: 54% (28/51)
remote: Compressing objects: 56% (29/51)
remote: Compressing objects: 58% (30/51)
remote: Compressing objects: 60% (31/51)
remote: Compressing objects: 62% (32/51)
remote: Compressing objects: 64% (33/51)
remote: Compressing objects: 66% (34/51)
remote: Compressing objects: 68% (35/51)
remote: Compressing objects: 70% (36/51)
remote: Compressing objects: 72% (37/51)
remote: Compressing objects: 74% (38/51)
remote: Compressing objects: 76% (39/51)
remote: Compressing objects: 78% (40/51)
remote: Compressing objects: 80% (41/51)
remote: Compressing objects: 82% (42/51)
remote: Compressing objects: 84% (43/51)
remote: Compressing objects: 86% (44/51)
remote: Compressing objects: 88% (45/51)
remote: Compressing objects: 90% (46/51)
remote: Compressing objects: 92% (47/51)
remote: Compressing objects: 94% (48/51)
remote: Compressing objects: 96% (49/51)
remote: Compressing objects: 98% (50/51)
remote: Compressing objects: 100% (51/51)
remote: Compressing objects: 100% (51/51), done.
remote: Total 73 (delta 25), reused 19 (delta 11), pack-reused 11 (from 1)
>From https://github.com/python/cpython
* branch main -> FETCH_HEAD
Note: checking out '325e9b8ef400b86fb077aa40d5cb8cec6e4df7bb'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:
git checkout -b new_branch_name
HEAD is now at 325e9b8... gh-99108: Add HACL* Blake2 implementation to hashlib
(GH-119316)
Switched to and reset branch 'main'
configure: WARNING: no system libmpdecimal found; falling back to bundled
libmpdecimal (deprecated and scheduled for removal in Python 3.15)
../Modules/_hacl/Lib_Memzero0.c: In function ‘Lib_Memzero0_memzero0’:
../Modules/_hacl/Lib_Memzero0.c:43:5: error: implicit declaration of function
‘explicit_bzero’ [-Werror=implicit-function-declaration]
explicit_bzero(dst, len_);
^~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make: *** [Makefile:1531: Modules/_hacl/Lib_Memzero0.o] Error 1
make: *** Waiting for unfinished jobs....
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
make: [Makefile:3180: clean-retain-profile] Error 1 (ignored)
Test report
===========
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL7
LTO 3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/#/builders/507/builds/8024
Buildbot URL: https://buildbot.python.org/
Worker for this Build: cstratak-RHEL7-x86_64
Build Reason: <unknown>
Blamelist: Jonathan Protzenko <[email protected]>
BUILD FAILED: failed compile (failure)
Summary of the results of the build (if available):
===================================================
Captured traceback
==================
remote: Enumerating objects: 55, done.
remote: Counting objects: 2% (1/45)
remote: Counting objects: 4% (2/45)
remote: Counting objects: 6% (3/45)
remote: Counting objects: 8% (4/45)
remote: Counting objects: 11% (5/45)
remote: Counting objects: 13% (6/45)
remote: Counting objects: 15% (7/45)
remote: Counting objects: 17% (8/45)
remote: Counting objects: 20% (9/45)
remote: Counting objects: 22% (10/45)
remote: Counting objects: 24% (11/45)
remote: Counting objects: 26% (12/45)
remote: Counting objects: 28% (13/45)
remote: Counting objects: 31% (14/45)
remote: Counting objects: 33% (15/45)
remote: Counting objects: 35% (16/45)
remote: Counting objects: 37% (17/45)
remote: Counting objects: 40% (18/45)
remote: Counting objects: 42% (19/45)
remote: Counting objects: 44% (20/45)
remote: Counting objects: 46% (21/45)
remote: Counting objects: 48% (22/45)
remote: Counting objects: 51% (23/45)
remote: Counting objects: 53% (24/45)
remote: Counting objects: 55% (25/45)
remote: Counting objects: 57% (26/45)
remote: Counting objects: 60% (27/45)
remote: Counting objects: 62% (28/45)
remote: Counting objects: 64% (29/45)
remote: Counting objects: 66% (30/45)
remote: Counting objects: 68% (31/45)
remote: Counting objects: 71% (32/45)
remote: Counting objects: 73% (33/45)
remote: Counting objects: 75% (34/45)
remote: Counting objects: 77% (35/45)
remote: Counting objects: 80% (36/45)
remote: Counting objects: 82% (37/45)
remote: Counting objects: 84% (38/45)
remote: Counting objects: 86% (39/45)
remote: Counting objects: 88% (40/45)
remote: Counting objects: 91% (41/45)
remote: Counting objects: 93% (42/45)
remote: Counting objects: 95% (43/45)
remote: Counting objects: 97% (44/45)
remote: Counting objects: 100% (45/45)
remote: Counting objects: 100% (45/45), done.
remote: Compressing objects: 3% (1/33)
remote: Compressing objects: 6% (2/33)
remote: Compressing objects: 9% (3/33)
remote: Compressing objects: 12% (4/33)
remote: Compressing objects: 15% (5/33)
remote: Compressing objects: 18% (6/33)
remote: Compressing objects: 21% (7/33)
remote: Compressing objects: 24% (8/33)
remote: Compressing objects: 27% (9/33)
remote: Compressing objects: 30% (10/33)
remote: Compressing objects: 33% (11/33)
remote: Compressing objects: 36% (12/33)
remote: Compressing objects: 39% (13/33)
remote: Compressing objects: 42% (14/33)
remote: Compressing objects: 45% (15/33)
remote: Compressing objects: 48% (16/33)
remote: Compressing objects: 51% (17/33)
remote: Compressing objects: 54% (18/33)
remote: Compressing objects: 57% (19/33)
remote: Compressing objects: 60% (20/33)
remote: Compressing objects: 63% (21/33)
remote: Compressing objects: 66% (22/33)
remote: Compressing objects: 69% (23/33)
remote: Compressing objects: 72% (24/33)
remote: Compressing objects: 75% (25/33)
remote: Compressing objects: 78% (26/33)
remote: Compressing objects: 81% (27/33)
remote: Compressing objects: 84% (28/33)
remote: Compressing objects: 87% (29/33)
remote: Compressing objects: 90% (30/33)
remote: Compressing objects: 93% (31/33)
remote: Compressing objects: 96% (32/33)
remote: Compressing objects: 100% (33/33)
remote: Compressing objects: 100% (33/33), done.
remote: Total 55 (delta 19), reused 13 (delta 12), pack-reused 10 (from 1)
>From https://github.com/python/cpython
* branch main -> FETCH_HEAD
Note: checking out '325e9b8ef400b86fb077aa40d5cb8cec6e4df7bb'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:
git checkout -b new_branch_name
HEAD is now at 325e9b8... gh-99108: Add HACL* Blake2 implementation to hashlib
(GH-119316)
Switched to and reset branch 'main'
configure: WARNING: no system libmpdecimal found; falling back to bundled
libmpdecimal (deprecated and scheduled for removal in Python 3.15)
./Modules/_hacl/Lib_Memzero0.c: In function ‘Lib_Memzero0_memzero0’:
./Modules/_hacl/Lib_Memzero0.c:43:5: error: implicit declaration of function
‘explicit_bzero’ [-Werror=implicit-function-declaration]
explicit_bzero(dst, len_);
^~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make: *** [Makefile:1531: Modules/_hacl/Lib_Memzero0.o] Error 1
make: *** Waiting for unfinished jobs....
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
make: [Makefile:3180: clean-retain-profile] Error 1 (ignored)
Test report
===========
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL7
LTO + PGO 3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/#/builders/96/builds/8086
Buildbot URL: https://buildbot.python.org/
Worker for this Build: cstratak-RHEL7-x86_64
Build Reason: <unknown>
Blamelist: Jonathan Protzenko <[email protected]>
BUILD FAILED: failed compile (failure)
Summary of the results of the build (if available):
===================================================
Captured traceback
==================
remote: Enumerating objects: 55, done.
remote: Counting objects: 2% (1/44)
remote: Counting objects: 4% (2/44)
remote: Counting objects: 6% (3/44)
remote: Counting objects: 9% (4/44)
remote: Counting objects: 11% (5/44)
remote: Counting objects: 13% (6/44)
remote: Counting objects: 15% (7/44)
remote: Counting objects: 18% (8/44)
remote: Counting objects: 20% (9/44)
remote: Counting objects: 22% (10/44)
remote: Counting objects: 25% (11/44)
remote: Counting objects: 27% (12/44)
remote: Counting objects: 29% (13/44)
remote: Counting objects: 31% (14/44)
remote: Counting objects: 34% (15/44)
remote: Counting objects: 36% (16/44)
remote: Counting objects: 38% (17/44)
remote: Counting objects: 40% (18/44)
remote: Counting objects: 43% (19/44)
remote: Counting objects: 45% (20/44)
remote: Counting objects: 47% (21/44)
remote: Counting objects: 50% (22/44)
remote: Counting objects: 52% (23/44)
remote: Counting objects: 54% (24/44)
remote: Counting objects: 56% (25/44)
remote: Counting objects: 59% (26/44)
remote: Counting objects: 61% (27/44)
remote: Counting objects: 63% (28/44)
remote: Counting objects: 65% (29/44)
remote: Counting objects: 68% (30/44)
remote: Counting objects: 70% (31/44)
remote: Counting objects: 72% (32/44)
remote: Counting objects: 75% (33/44)
remote: Counting objects: 77% (34/44)
remote: Counting objects: 79% (35/44)
remote: Counting objects: 81% (36/44)
remote: Counting objects: 84% (37/44)
remote: Counting objects: 86% (38/44)
remote: Counting objects: 88% (39/44)
remote: Counting objects: 90% (40/44)
remote: Counting objects: 93% (41/44)
remote: Counting objects: 95% (42/44)
remote: Counting objects: 97% (43/44)
remote: Counting objects: 100% (44/44)
remote: Counting objects: 100% (44/44), done.
remote: Compressing objects: 3% (1/33)
remote: Compressing objects: 6% (2/33)
remote: Compressing objects: 9% (3/33)
remote: Compressing objects: 12% (4/33)
remote: Compressing objects: 15% (5/33)
remote: Compressing objects: 18% (6/33)
remote: Compressing objects: 21% (7/33)
remote: Compressing objects: 24% (8/33)
remote: Compressing objects: 27% (9/33)
remote: Compressing objects: 30% (10/33)
remote: Compressing objects: 33% (11/33)
remote: Compressing objects: 36% (12/33)
remote: Compressing objects: 39% (13/33)
remote: Compressing objects: 42% (14/33)
remote: Compressing objects: 45% (15/33)
remote: Compressing objects: 48% (16/33)
remote: Compressing objects: 51% (17/33)
remote: Compressing objects: 54% (18/33)
remote: Compressing objects: 57% (19/33)
remote: Compressing objects: 60% (20/33)
remote: Compressing objects: 63% (21/33)
remote: Compressing objects: 66% (22/33)
remote: Compressing objects: 69% (23/33)
remote: Compressing objects: 72% (24/33)
remote: Compressing objects: 75% (25/33)
remote: Compressing objects: 78% (26/33)
remote: Compressing objects: 81% (27/33)
remote: Compressing objects: 84% (28/33)
remote: Compressing objects: 87% (29/33)
remote: Compressing objects: 90% (30/33)
remote: Compressing objects: 93% (31/33)
remote: Compressing objects: 96% (32/33)
remote: Compressing objects: 100% (33/33)
remote: Compressing objects: 100% (33/33), done.
remote: Total 55 (delta 18), reused 12 (delta 11), pack-reused 11 (from 1)
>From https://github.com/python/cpython
* branch main -> FETCH_HEAD
Note: checking out '325e9b8ef400b86fb077aa40d5cb8cec6e4df7bb'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:
git checkout -b new_branch_name
HEAD is now at 325e9b8... gh-99108: Add HACL* Blake2 implementation to hashlib
(GH-119316)
Switched to and reset branch 'main'
configure: WARNING: no system libmpdecimal found; falling back to bundled
libmpdecimal (deprecated and scheduled for removal in Python 3.15)
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
make[2]: [Makefile:3180: clean-retain-profile] Error 1 (ignored)
./Modules/_hacl/Lib_Memzero0.c: In function ‘Lib_Memzero0_memzero0’:
./Modules/_hacl/Lib_Memzero0.c:43:5: error: implicit declaration of function
‘explicit_bzero’ [-Werror=implicit-function-declaration]
explicit_bzero(dst, len_);
^~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make[2]: *** [Makefile:1531: Modules/_hacl/Lib_Memzero0.o] Error 1
make[2]: *** Waiting for unfinished jobs....
make[1]: *** [Makefile:903: profile-gen-stamp] Error 2
make: *** [Makefile:915: profile-run-stamp] Error 2
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
make: [Makefile:3180: clean-retain-profile] Error 1 (ignored)
Test report
===========
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder AMD64 RHEL7
3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/#/builders/15/builds/8331
Buildbot URL: https://buildbot.python.org/
Worker for this Build: cstratak-RHEL7-x86_64
Build Reason: <unknown>
Blamelist: Jonathan Protzenko <[email protected]>
BUILD FAILED: failed compile (failure)
Summary of the results of the build (if available):
===================================================
Captured traceback
==================
remote: Enumerating objects: 55, done.
remote: Counting objects: 2% (1/45)
remote: Counting objects: 4% (2/45)
remote: Counting objects: 6% (3/45)
remote: Counting objects: 8% (4/45)
remote: Counting objects: 11% (5/45)
remote: Counting objects: 13% (6/45)
remote: Counting objects: 15% (7/45)
remote: Counting objects: 17% (8/45)
remote: Counting objects: 20% (9/45)
remote: Counting objects: 22% (10/45)
remote: Counting objects: 24% (11/45)
remote: Counting objects: 26% (12/45)
remote: Counting objects: 28% (13/45)
remote: Counting objects: 31% (14/45)
remote: Counting objects: 33% (15/45)
remote: Counting objects: 35% (16/45)
remote: Counting objects: 37% (17/45)
remote: Counting objects: 40% (18/45)
remote: Counting objects: 42% (19/45)
remote: Counting objects: 44% (20/45)
remote: Counting objects: 46% (21/45)
remote: Counting objects: 48% (22/45)
remote: Counting objects: 51% (23/45)
remote: Counting objects: 53% (24/45)
remote: Counting objects: 55% (25/45)
remote: Counting objects: 57% (26/45)
remote: Counting objects: 60% (27/45)
remote: Counting objects: 62% (28/45)
remote: Counting objects: 64% (29/45)
remote: Counting objects: 66% (30/45)
remote: Counting objects: 68% (31/45)
remote: Counting objects: 71% (32/45)
remote: Counting objects: 73% (33/45)
remote: Counting objects: 75% (34/45)
remote: Counting objects: 77% (35/45)
remote: Counting objects: 80% (36/45)
remote: Counting objects: 82% (37/45)
remote: Counting objects: 84% (38/45)
remote: Counting objects: 86% (39/45)
remote: Counting objects: 88% (40/45)
remote: Counting objects: 91% (41/45)
remote: Counting objects: 93% (42/45)
remote: Counting objects: 95% (43/45)
remote: Counting objects: 97% (44/45)
remote: Counting objects: 100% (45/45)
remote: Counting objects: 100% (45/45), done.
remote: Compressing objects: 3% (1/33)
remote: Compressing objects: 6% (2/33)
remote: Compressing objects: 9% (3/33)
remote: Compressing objects: 12% (4/33)
remote: Compressing objects: 15% (5/33)
remote: Compressing objects: 18% (6/33)
remote: Compressing objects: 21% (7/33)
remote: Compressing objects: 24% (8/33)
remote: Compressing objects: 27% (9/33)
remote: Compressing objects: 30% (10/33)
remote: Compressing objects: 33% (11/33)
remote: Compressing objects: 36% (12/33)
remote: Compressing objects: 39% (13/33)
remote: Compressing objects: 42% (14/33)
remote: Compressing objects: 45% (15/33)
remote: Compressing objects: 48% (16/33)
remote: Compressing objects: 51% (17/33)
remote: Compressing objects: 54% (18/33)
remote: Compressing objects: 57% (19/33)
remote: Compressing objects: 60% (20/33)
remote: Compressing objects: 63% (21/33)
remote: Compressing objects: 66% (22/33)
remote: Compressing objects: 69% (23/33)
remote: Compressing objects: 72% (24/33)
remote: Compressing objects: 75% (25/33)
remote: Compressing objects: 78% (26/33)
remote: Compressing objects: 81% (27/33)
remote: Compressing objects: 84% (28/33)
remote: Compressing objects: 87% (29/33)
remote: Compressing objects: 90% (30/33)
remote: Compressing objects: 93% (31/33)
remote: Compressing objects: 96% (32/33)
remote: Compressing objects: 100% (33/33)
remote: Compressing objects: 100% (33/33), done.
remote: Total 55 (delta 19), reused 13 (delta 12), pack-reused 10 (from 1)
>From https://github.com/python/cpython
* branch main -> FETCH_HEAD
Note: checking out '325e9b8ef400b86fb077aa40d5cb8cec6e4df7bb'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:
git checkout -b new_branch_name
HEAD is now at 325e9b8... gh-99108: Add HACL* Blake2 implementation to hashlib
(GH-119316)
Switched to and reset branch 'main'
configure: WARNING: no system libmpdecimal found; falling back to bundled
libmpdecimal (deprecated and scheduled for removal in Python 3.15)
../Modules/_hacl/Lib_Memzero0.c: In function ‘Lib_Memzero0_memzero0’:
../Modules/_hacl/Lib_Memzero0.c:43:5: error: implicit declaration of function
‘explicit_bzero’ [-Werror=implicit-function-declaration]
explicit_bzero(dst, len_);
^~~~~~~~~~~~~~
cc1: some warnings being treated as errors
make: *** [Makefile:1531: Modules/_hacl/Lib_Memzero0.o] Error 1
make: *** Waiting for unfinished jobs....
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
make: [Makefile:3180: clean-retain-profile] Error 1 (ignored)
Test report
===========
Sincerely,
-The Buildbot
_______________________________________________
Buildbot-status mailing list -- [email protected]
To unsubscribe send an email to [email protected]
https://mail.python.org/mailman3/lists/buildbot-status.python.org/
Member address: [email protected]
