The Buildbot has detected a new failure on builder PPC64LE Fedora Rawhide LTO +
PGO 3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/494/builds/5755
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: cstratak-fedora-rawhide-ppc64le
Build Reason: <unknown>
Blamelist: Donghee Na <donghee...@python.org>
BUILD FAILED: failed compile (failure)
Summary of the results of the build (if available):
===================================================
Captured traceback
==================
remote: Enumerating objects: 5, done.
remote: Counting objects: 20% (1/5)
remote: Counting objects: 40% (2/5)
remote: Counting objects: 60% (3/5)
remote: Counting objects: 80% (4/5)
remote: Counting objects: 100% (5/5)
remote: Counting objects: 100% (5/5), done.
remote: Compressing objects: 20% (1/5)
remote: Compressing objects: 40% (2/5)
remote: Compressing objects: 60% (3/5)
remote: Compressing objects: 80% (4/5)
remote: Compressing objects: 100% (5/5)
remote: Compressing objects: 100% (5/5), done.
remote: Total 5 (delta 0), reused 3 (delta 0), pack-reused 0
>From https://github.com/python/cpython
* branch main -> FETCH_HEAD
Note: switching to '2e91578a76d38fa8895fce95e2661618c3de892c'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 2e91578a76d gh-115103: Update refleak checker to trigger
_PyMem_ProcessDelayed (gh-116238)
Switched to and reset branch 'main'
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
make[2]: [Makefile:2996: clean-retain-profile] Error 1 (ignored)
ar: unable to copy file 'libpython3.13.a'; reason: No space left on device
make[2]: *** [Makefile:1008: libpython3.13.a] Error 1
make[1]: *** [Makefile:838: profile-gen-stamp] Error 2
make: *** [Makefile:850: profile-run-stamp] Error 2
Test report
===========
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder AMD64 Debian
PGO 3.x while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/249/builds/7921
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: gps-debian-profile-opt
Build Reason: <unknown>
Blamelist: Brett Cannon <br...@python.org>, Donghee Na <donghee...@python.org>,
Eric Snow <ericsnowcurren...@gmail.com>, Marco Trevisan <m...@3v1n0.net>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
remote: Enumerating objects: 4, done.
remote: Counting objects: 25% (1/4)
remote: Counting objects: 50% (2/4)
remote: Counting objects: 75% (3/4)
remote: Counting objects: 100% (4/4)
remote: Counting objects: 100% (4/4), done.
remote: Compressing objects: 25% (1/4)
remote: Compressing objects: 50% (2/4)
remote: Compressing objects: 75% (3/4)
remote: Compressing objects: 100% (4/4)
remote: Compressing objects: 100% (4/4), done.
remote: Total 4 (delta 0), reused 0 (delta 0), pack-reused 0
>From https://github.com/python/cpython
* branch main -> FETCH_HEAD
Note: switching to '2e91578a76d38fa8895fce95e2661618c3de892c'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at 2e91578a76d gh-115103: Update refleak checker to trigger
_PyMem_ProcessDelayed (gh-116238)
Switched to and reset branch 'main'
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
make[2]: [Makefile:2996: clean-retain-profile] Error 1 (ignored)
./Modules/readline.c: In function ‘setup_readline’:
./Modules/readline.c:1305:21: warning: assignment to ‘int (*)(void)’ from
incompatible pointer type ‘int (*)(const char *, int)’
[-Wincompatible-pointer-types]
1305 | rl_startup_hook = on_startup_hook;
| ^
./Modules/readline.c:1307:23: warning: assignment to ‘int (*)(void)’ from
incompatible pointer type ‘int (*)(const char *, int)’
[-Wincompatible-pointer-types]
1307 | rl_pre_input_hook = on_pre_input_hook;
| ^
In function ‘word_to_string’,
inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13,
inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:611:18:
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:359:14: note: in expansion of macro
‘EXTRACT_DIGIT’
359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:358:14: note: in expansion of macro
‘EXTRACT_DIGIT’
358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:359:14: note: in expansion of macro
‘EXTRACT_DIGIT’
359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:360:14: note: in expansion of macro
‘EXTRACT_DIGIT’
360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:357:14: note: in expansion of macro
‘EXTRACT_DIGIT’
357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:356:14: note: in expansion of macro
‘EXTRACT_DIGIT’
356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:357:14: note: in expansion of macro
‘EXTRACT_DIGIT’
357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:358:14: note: in expansion of macro
‘EXTRACT_DIGIT’
358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:361:14: note: in expansion of macro
‘EXTRACT_DIGIT’
361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:360:14: note: in expansion of macro
‘EXTRACT_DIGIT’
360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:361:14: note: in expansion of macro
‘EXTRACT_DIGIT’
361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:362:14: note: in expansion of macro
‘EXTRACT_DIGIT’
362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:363:14: note: in expansion of macro
‘EXTRACT_DIGIT’
363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:362:14: note: in expansion of macro
‘EXTRACT_DIGIT’
362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:363:14: note: in expansion of macro
‘EXTRACT_DIGIT’
363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:365:14: note: in expansion of macro
‘EXTRACT_DIGIT’
365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:366:14: note: in expansion of macro
‘EXTRACT_DIGIT’
366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:365:14: note: in expansion of macro
‘EXTRACT_DIGIT’
365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:366:14: note: in expansion of macro
‘EXTRACT_DIGIT’
366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:367:14: note: in expansion of macro
‘EXTRACT_DIGIT’
367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:368:14: note: in expansion of macro
‘EXTRACT_DIGIT’
368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:367:14: note: in expansion of macro
‘EXTRACT_DIGIT’
367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:368:14: note: in expansion of macro
‘EXTRACT_DIGIT’
368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:369:14: note: in expansion of macro
‘EXTRACT_DIGIT’
369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:370:14: note: in expansion of macro
‘EXTRACT_DIGIT’
370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:371:14: note: in expansion of macro
‘EXTRACT_DIGIT’
371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:369:14: note: in expansion of macro
‘EXTRACT_DIGIT’
369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:370:14: note: in expansion of macro
‘EXTRACT_DIGIT’
370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:371:14: note: in expansion of macro
‘EXTRACT_DIGIT’
371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:372:14: note: in expansion of macro
‘EXTRACT_DIGIT’
372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:372:14: note: in expansion of macro
‘EXTRACT_DIGIT’
372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:373:14: note: in expansion of macro
‘EXTRACT_DIGIT’
373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:373:14: note: in expansion of macro
‘EXTRACT_DIGIT’
373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot);
| ^~~~~~~~~~~~~
In function ‘word_to_string’,
inlined from ‘coeff_to_string’ at ./Modules/_decimal/libmpdec/io.c:410:13,
inlined from ‘_mpd_to_string’ at ./Modules/_decimal/libmpdec/io.c:607:18:
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:359:14: note: in expansion of macro
‘EXTRACT_DIGIT’
359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:358:14: note: in expansion of macro
‘EXTRACT_DIGIT’
358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:359:14: note: in expansion of macro
‘EXTRACT_DIGIT’
359 | case 15: EXTRACT_DIGIT(s, x, 100000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:360:14: note: in expansion of macro
‘EXTRACT_DIGIT’
360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:357:14: note: in expansion of macro
‘EXTRACT_DIGIT’
357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:356:14: note: in expansion of macro
‘EXTRACT_DIGIT’
356 | case 18: EXTRACT_DIGIT(s, x, 100000000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:357:14: note: in expansion of macro
‘EXTRACT_DIGIT’
357 | case 17: EXTRACT_DIGIT(s, x, 10000000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:358:14: note: in expansion of macro
‘EXTRACT_DIGIT’
358 | case 16: EXTRACT_DIGIT(s, x, 1000000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:361:14: note: in expansion of macro
‘EXTRACT_DIGIT’
361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:360:14: note: in expansion of macro
‘EXTRACT_DIGIT’
360 | case 14: EXTRACT_DIGIT(s, x, 10000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:361:14: note: in expansion of macro
‘EXTRACT_DIGIT’
361 | case 13: EXTRACT_DIGIT(s, x, 1000000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:362:14: note: in expansion of macro
‘EXTRACT_DIGIT’
362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:363:14: note: in expansion of macro
‘EXTRACT_DIGIT’
363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:362:14: note: in expansion of macro
‘EXTRACT_DIGIT’
362 | case 12: EXTRACT_DIGIT(s, x, 100000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:363:14: note: in expansion of macro
‘EXTRACT_DIGIT’
363 | case 11: EXTRACT_DIGIT(s, x, 10000000000ULL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:365:14: note: in expansion of macro
‘EXTRACT_DIGIT’
365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:366:14: note: in expansion of macro
‘EXTRACT_DIGIT’
366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:365:14: note: in expansion of macro
‘EXTRACT_DIGIT’
365 | case 10: EXTRACT_DIGIT(s, x, 1000000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:366:14: note: in expansion of macro
‘EXTRACT_DIGIT’
366 | case 9: EXTRACT_DIGIT(s, x, 100000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:367:14: note: in expansion of macro
‘EXTRACT_DIGIT’
367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:368:14: note: in expansion of macro
‘EXTRACT_DIGIT’
368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:367:14: note: in expansion of macro
‘EXTRACT_DIGIT’
367 | case 8: EXTRACT_DIGIT(s, x, 10000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:368:14: note: in expansion of macro
‘EXTRACT_DIGIT’
368 | case 7: EXTRACT_DIGIT(s, x, 1000000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:369:14: note: in expansion of macro
‘EXTRACT_DIGIT’
369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:370:14: note: in expansion of macro
‘EXTRACT_DIGIT’
370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:369:14: note: in expansion of macro
‘EXTRACT_DIGIT’
369 | case 6: EXTRACT_DIGIT(s, x, 100000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:370:14: note: in expansion of macro
‘EXTRACT_DIGIT’
370 | case 5: EXTRACT_DIGIT(s, x, 10000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:371:14: note: in expansion of macro
‘EXTRACT_DIGIT’
371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:372:14: note: in expansion of macro
‘EXTRACT_DIGIT’
372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:373:14: note: in expansion of macro
‘EXTRACT_DIGIT’
373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:371:14: note: in expansion of macro
‘EXTRACT_DIGIT’
371 | case 4: EXTRACT_DIGIT(s, x, 1000UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:372:14: note: in expansion of macro
‘EXTRACT_DIGIT’
372 | case 3: EXTRACT_DIGIT(s, x, 100UL, dot);
| ^~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:348:40: warning: writing 1 byte into a region
of size 0 [-Wstringop-overflow=]
348 | if (s == dot) *s++ = '.'; *s++ = '0' + (char)(x / d); x %= d
| ~~~~~^~~~~~~~~~~~~~~~~~~~~
./Modules/_decimal/libmpdec/io.c:373:14: note: in expansion of macro
‘EXTRACT_DIGIT’
373 | case 2: EXTRACT_DIGIT(s, x, 10UL, dot);
| ^~~~~~~~~~~~~
./Modules/readline.c: In function ‘setup_readline’:
./Modules/readline.c:1305:21: warning: assignment to ‘int (*)(void)’ from
incompatible pointer type ‘int (*)(const char *, int)’
[-Wincompatible-pointer-types]
1305 | rl_startup_hook = on_startup_hook;
| ^
./Modules/readline.c:1307:23: warning: assignment to ‘int (*)(void)’ from
incompatible pointer type ‘int (*)(const char *, int)’
[-Wincompatible-pointer-types]
1307 | rl_pre_input_hook = on_pre_input_hook;
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3,
inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1192:13:
./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
392 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’:
./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1
1036 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1070:9:
./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
392 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1
1036 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1076:12:
./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
392 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1
1036 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1076:12:
./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
392 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1
1036 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1083:9:
./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
392 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1
1036 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1083:9:
./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
392 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1
1036 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1110:7:
./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
392 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1
1036 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1123:9:
./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
392 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1
1036 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1038:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1123:9:
./Modules/expat/xmltok.c:392:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
392 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1036:8: note: destination object ‘buf’ of size 1
1036 | char buf[1];
| ^~~
make: *** [Makefile:2151: buildbottest] Error 3
Test report
===========
Sincerely,
-The Buildbot
_______________________________________________
Buildbot-status mailing list -- buildbot-status@python.org
To unsubscribe send an email to buildbot-status-le...@python.org
https://mail.python.org/mailman3/lists/buildbot-status.python.org/
Member address: arch...@mail-archive.com
