The Buildbot has detected a new failure on builder s390x Fedora Rawhide LTO
3.11 while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/947/builds/1066
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-rawhide-z
Build Reason: <unknown>
Blamelist: Miss Islington (bot)
<[email protected]>, Serhiy Storchaka
<[email protected]>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
remote: Enumerating objects: 65, done.
remote: Counting objects: 2% (1/43)
remote: Counting objects: 4% (2/43)
remote: Counting objects: 6% (3/43)
remote: Counting objects: 9% (4/43)
remote: Counting objects: 11% (5/43)
remote: Counting objects: 13% (6/43)
remote: Counting objects: 16% (7/43)
remote: Counting objects: 18% (8/43)
remote: Counting objects: 20% (9/43)
remote: Counting objects: 23% (10/43)
remote: Counting objects: 25% (11/43)
remote: Counting objects: 27% (12/43)
remote: Counting objects: 30% (13/43)
remote: Counting objects: 32% (14/43)
remote: Counting objects: 34% (15/43)
remote: Counting objects: 37% (16/43)
remote: Counting objects: 39% (17/43)
remote: Counting objects: 41% (18/43)
remote: Counting objects: 44% (19/43)
remote: Counting objects: 46% (20/43)
remote: Counting objects: 48% (21/43)
remote: Counting objects: 51% (22/43)
remote: Counting objects: 53% (23/43)
remote: Counting objects: 55% (24/43)
remote: Counting objects: 58% (25/43)
remote: Counting objects: 60% (26/43)
remote: Counting objects: 62% (27/43)
remote: Counting objects: 65% (28/43)
remote: Counting objects: 67% (29/43)
remote: Counting objects: 69% (30/43)
remote: Counting objects: 72% (31/43)
remote: Counting objects: 74% (32/43)
remote: Counting objects: 76% (33/43)
remote: Counting objects: 79% (34/43)
remote: Counting objects: 81% (35/43)
remote: Counting objects: 83% (36/43)
remote: Counting objects: 86% (37/43)
remote: Counting objects: 88% (38/43)
remote: Counting objects: 90% (39/43)
remote: Counting objects: 93% (40/43)
remote: Counting objects: 95% (41/43)
remote: Counting objects: 97% (42/43)
remote: Counting objects: 100% (43/43)
remote: Counting objects: 100% (43/43), done.
remote: Compressing objects: 5% (1/17)
remote: Compressing objects: 11% (2/17)
remote: Compressing objects: 17% (3/17)
remote: Compressing objects: 23% (4/17)
remote: Compressing objects: 29% (5/17)
remote: Compressing objects: 35% (6/17)
remote: Compressing objects: 41% (7/17)
remote: Compressing objects: 47% (8/17)
remote: Compressing objects: 52% (9/17)
remote: Compressing objects: 58% (10/17)
remote: Compressing objects: 64% (11/17)
remote: Compressing objects: 70% (12/17)
remote: Compressing objects: 76% (13/17)
remote: Compressing objects: 82% (14/17)
remote: Compressing objects: 88% (15/17)
remote: Compressing objects: 94% (16/17)
remote: Compressing objects: 100% (17/17)
remote: Compressing objects: 100% (17/17), done.
remote: Total 65 (delta 28), reused 28 (delta 26), pack-reused 22
>From https://github.com/python/cpython
* branch 3.11 -> FETCH_HEAD
Note: switching to 'f5d9980217b2f36d095aa58a9b949b828f113082'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f5d9980217 [3.11] gh-114257: Ignore the FileNotFound error in
ctypes.util._is_elf() (GH-114394) (GH-114445)
Switched to and reset branch '3.11'
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
Kill <WorkerThread #5 running test=test_posix pid=2546671 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #5 running test=test_posix
pid=2546671 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/python',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests":
[], "match_tests_dict": null, "rerun": false, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources":
["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess",
"urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true,
"random_seed": 1959685396, "json_file": {"file": 11, "file_type": "UNIX_FD"},
"__runtests__": true}'], 30.0)
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/subprocess.py:1127:
ResourceWarning: subprocess 2546671 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
Kill <WorkerThread #1 running test=test_posix pid=2582292 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #1 running test=test_posix
pid=2582292 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/python',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests":
[], "match_tests_dict": {}, "rerun": true, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources":
["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess",
"urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true,
"random_seed": 1959685396, "json_file": {"file": 4, "file_type": "UNIX_FD"},
"__runtests__": true}'], 30.0)
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto/build/Lib/subprocess.py:1127:
ResourceWarning: subprocess 2582292 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
make: *** [Makefile:1848: buildbottest] Error 2
Test report
===========
Failed tests:
- test_posix
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora
Rawhide LTO + PGO 3.11 while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/1037/builds/1185
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-rawhide-z
Build Reason: <unknown>
Blamelist: Miss Islington (bot)
<[email protected]>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
remote: Enumerating objects: 34, done.
remote: Counting objects: 4% (1/23)
remote: Counting objects: 8% (2/23)
remote: Counting objects: 13% (3/23)
remote: Counting objects: 17% (4/23)
remote: Counting objects: 21% (5/23)
remote: Counting objects: 26% (6/23)
remote: Counting objects: 30% (7/23)
remote: Counting objects: 34% (8/23)
remote: Counting objects: 39% (9/23)
remote: Counting objects: 43% (10/23)
remote: Counting objects: 47% (11/23)
remote: Counting objects: 52% (12/23)
remote: Counting objects: 56% (13/23)
remote: Counting objects: 60% (14/23)
remote: Counting objects: 65% (15/23)
remote: Counting objects: 69% (16/23)
remote: Counting objects: 73% (17/23)
remote: Counting objects: 78% (18/23)
remote: Counting objects: 82% (19/23)
remote: Counting objects: 86% (20/23)
remote: Counting objects: 91% (21/23)
remote: Counting objects: 95% (22/23)
remote: Counting objects: 100% (23/23)
remote: Counting objects: 100% (23/23), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 34 (delta 16), reused 16 (delta 16), pack-reused 11
>From https://github.com/python/cpython
* branch 3.11 -> FETCH_HEAD
Note: switching to 'f5d9980217b2f36d095aa58a9b949b828f113082'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f5d9980217 [3.11] gh-114257: Ignore the FileNotFound error in
ctypes.util._is_elf() (GH-114394) (GH-114445)
Switched to and reset branch '3.11'
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
find: ‘build’: No such file or directory
make[2]: [Makefile:2602: clean-retain-profile] Error 1 (ignored)
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
In file included from Python/bltinmodule.c:6:
In function ‘_PyObject_VectorcallTstate’,
inlined from ‘_PyObject_VectorcallTstate’ at
./Include/internal/pycore_call.h:77:1,
inlined from ‘map_next’ at Python/bltinmodule.c:1371:14:
./Include/internal/pycore_call.h:90:16: warning: ‘small_stack’ may be used
uninitialized [-Wmaybe-uninitialized]
90 | return _PyObject_MakeTpCall(tstate, callable, args, nargs,
kwnames);
|
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from ./Include/abstract.h:866,
from ./Include/Python.h:100,
from Python/bltinmodule.c:3:
./Include/cpython/abstract.h: In function ‘map_next’:
./Include/cpython/abstract.h:47:24: note: by argument 3 of type ‘struct
PyObject * const *’ to ‘_PyObject_MakeTpCall’ declared here
47 | PyAPI_FUNC(PyObject *) _PyObject_MakeTpCall(
| ^~~~~~~~~~~~~~~~~~~~
Python/bltinmodule.c:1343:15: note: ‘small_stack’ declared here
1343 | PyObject *small_stack[_PY_FASTCALL_SMALL_STACK];
| ^~~~~~~~~~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^~~
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘doParseXmlDecl’ at ./Modules/expat/xmltok.c:1197:13:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘doParseXmlDecl’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1075:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1081:12:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1088:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1115:7:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
In function ‘utf8_toUtf8’,
inlined from ‘toAscii’ at ./Modules/expat/xmltok.c:1043:3,
inlined from ‘parsePseudoAttribute’ at ./Modules/expat/xmltok.c:1128:9:
./Modules/expat/xmltok.c:390:5: warning: ‘memcpy’ writing 2 or more bytes into
a region of size 1 overflows the destination [-Wstringop-overflow=]
390 | memcpy(*toP, *fromP, bytesToCopy);
| ^
./Modules/expat/xmltok.c: In function ‘parsePseudoAttribute’:
./Modules/expat/xmltok.c:1041:8: note: destination object ‘buf’ of size 1
1041 | char buf[1];
| ^
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
Kill <WorkerThread #4 running test=test_posix pid=2511432 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #4 running test=test_posix
pid=2511432 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/python',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests":
[], "match_tests_dict": null, "rerun": false, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources":
["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess",
"urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true,
"random_seed": 2150061723, "json_file": {"file": 10, "file_type": "UNIX_FD"},
"__runtests__": true}'], 30.0)
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/subprocess.py:1127:
ResourceWarning: subprocess 2511432 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
Kill <WorkerThread #1 running test=test_posix pid=2531617 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #1 running test=test_posix
pid=2531617 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/python',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests":
[], "match_tests_dict": {}, "rerun": true, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources":
["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess",
"urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true,
"random_seed": 2150061723, "json_file": {"file": 4, "file_type": "UNIX_FD"},
"__runtests__": true}'], 30.0)
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.lto-pgo/build/Lib/subprocess.py:1127:
ResourceWarning: subprocess 2531617 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
make: *** [Makefile:1848: buildbottest] Error 2
Test report
===========
Failed tests:
- test_posix
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora
Rawhide Clang Installed 3.11 while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/1010/builds/1190
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-rawhide-z
Build Reason: <unknown>
Blamelist: Miss Islington (bot)
<[email protected]>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
remote: Enumerating objects: 34, done.
remote: Counting objects: 3% (1/27)
remote: Counting objects: 7% (2/27)
remote: Counting objects: 11% (3/27)
remote: Counting objects: 14% (4/27)
remote: Counting objects: 18% (5/27)
remote: Counting objects: 22% (6/27)
remote: Counting objects: 25% (7/27)
remote: Counting objects: 29% (8/27)
remote: Counting objects: 33% (9/27)
remote: Counting objects: 37% (10/27)
remote: Counting objects: 40% (11/27)
remote: Counting objects: 44% (12/27)
remote: Counting objects: 48% (13/27)
remote: Counting objects: 51% (14/27)
remote: Counting objects: 55% (15/27)
remote: Counting objects: 59% (16/27)
remote: Counting objects: 62% (17/27)
remote: Counting objects: 66% (18/27)
remote: Counting objects: 70% (19/27)
remote: Counting objects: 74% (20/27)
remote: Counting objects: 77% (21/27)
remote: Counting objects: 81% (22/27)
remote: Counting objects: 85% (23/27)
remote: Counting objects: 88% (24/27)
remote: Counting objects: 92% (25/27)
remote: Counting objects: 96% (26/27)
remote: Counting objects: 100% (27/27)
remote: Counting objects: 100% (27/27), done.
remote: Compressing objects: 20% (1/5)
remote: Compressing objects: 40% (2/5)
remote: Compressing objects: 60% (3/5)
remote: Compressing objects: 80% (4/5)
remote: Compressing objects: 100% (5/5)
remote: Compressing objects: 100% (5/5), done.
remote: Total 34 (delta 22), reused 22 (delta 22), pack-reused 7
>From https://github.com/python/cpython
* branch 3.11 -> FETCH_HEAD
Note: switching to 'f5d9980217b2f36d095aa58a9b949b828f113082'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f5d9980217 [3.11] gh-114257: Ignore the FileNotFound error in
ctypes.util._is_elf() (GH-114394) (GH-114445)
Switched to and reset branch '3.11'
configure: WARNING: s390x-ibm-linux-gnu/clang is not supported
configure: WARNING:
Platform "s390x-ibm-linux-gnu" with compiler "clang" is not supported by the
CPython core team, see https://peps.python.org/pep-0011/ for more information.
./Modules/timemodule.c:151:13: warning: code will never be executed
[-Wunreachable-code]
151 | PyErr_SetString(PyExc_OverflowError,
| ^~~~~~~~~~~~~~~
1 warning generated.
./Modules/expat/xmlparse.c:3116:9: warning: code will never be executed
[-Wunreachable-code]
3116 | parser->m_characterDataHandler(parser->m_handlerArg,
parser->m_dataBuf,
| ^~~~~~
./Modules/expat/xmlparse.c:3115:16: note: silence by adding parentheses to mark
code as explicitly dead
3115 | else if (0 && parser->m_characterDataHandler)
| ^
| /* DISABLES CODE */ ( )
./Modules/expat/xmlparse.c:4059:9: warning: code will never be executed
[-Wunreachable-code]
4059 | parser->m_characterDataHandler(parser->m_handlerArg,
parser->m_dataBuf,
| ^~~~~~
./Modules/expat/xmlparse.c:4058:16: note: silence by adding parentheses to mark
code as explicitly dead
4058 | else if (0 && parser->m_characterDataHandler)
| ^
| /* DISABLES CODE */ ( )
2 warnings generated.
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_sysconfigdata__linux_s390x-linux-gnu.py
to 644
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/__pycache__/_sysconfigdata__linux_s390x-linux-gnu.cpython-311.pyc
to 644
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_contextvars.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/cmath.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/array.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/math.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_bisect.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_random.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_heapq.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_zoneinfo.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_datetime.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_json.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_lsprof.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_opcode.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_queue.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_statistics.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_struct.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_typing.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_asyncio.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/fcntl.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/unicodedata.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/grp.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/spwd.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_pickle.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/select.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_socket.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/syslog.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/mmap.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_xxsubinterpreters.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_posixsubprocess.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_csv.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/audioop.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_testclinic.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_testimportmultiple.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_testinternalcapi.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_testmultiphase.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_testcapi.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_testbuffer.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_xxtestfuzz.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_crypt.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_curses_panel.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/readline.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_md5.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_sha1.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_curses.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_hashlib.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_sha256.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_sha3.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_ssl.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_sha512.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_dbm.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_gdbm.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/termios.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/resource.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_blake2.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/ossaudiodev.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/zlib.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/binascii.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_bz2.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_lzma.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_multibytecodec.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/pyexpat.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_kr.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_elementtree.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_jp.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_sqlite3.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_cn.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_tw.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_iso2022.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_codecs_hk.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_ctypes_test.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_posixshmem.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_multiprocessing.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/xxlimited.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/xxlimited_35.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_tkinter.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_decimal.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/_ctypes.cpython-311-s390x-linux-gnu.so
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/
to 755
changing mode of
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/lib-dynload/__pycache__
to 755
WARNING: The scripts pip3 and pip3.11 are installed in
'/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/bin'
which is not on PATH.
Consider adding this directory to PATH or, if you prefer to suppress this
warning, use --no-warn-script-location.
WARNING: Running pip as the 'root' user can result in broken permissions and
conflicting behaviour with the system package manager. It is recommended to use
a virtual environment instead: https://pip.pypa.io/warnings/venv
Kill <WorkerThread #6 running test=test_posix pid=2480597 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #6 running test=test_posix
pid=2480597 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/bin/python3.11',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": false, "match_tests":
[], "match_tests_dict": null, "rerun": false, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": false, "memory_limit": null, "gc_threshold": null,
"use_resources": ["audio", "curses", "largefile", "network", "decimal", "cpu",
"subprocess", "urlfetch", "gui", "walltime"], "python_cmd": null, "randomize":
true, "random_seed": 712361634, "json_file": {"file": 24, "file_type":
"UNIX_FD"}, "__runtests__": true}'], 30.0)
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/subprocess.py:1127:
ResourceWarning: subprocess 2480597 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
Kill <WorkerThread #1 running test=test_posix pid=2494893 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #1 running test=test_posix
pid=2494893 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/bin/python3.11',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": false, "match_tests":
[], "match_tests_dict": {}, "rerun": true, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": false, "memory_limit": null, "gc_threshold": null,
"use_resources": ["audio", "curses", "largefile", "network", "decimal", "cpu",
"subprocess", "urlfetch", "gui", "walltime"], "python_cmd": null, "randomize":
true, "random_seed": 712361634, "json_file": {"file": 4, "file_type":
"UNIX_FD"}, "__runtests__": true}'], 30.0)
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang-installed/build/target/lib/python3.11/subprocess.py:1127:
ResourceWarning: subprocess 2494893 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
Test report
===========
Failed tests:
- test_posix
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora
Rawhide Clang 3.11 while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/982/builds/1192
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-rawhide-z
Build Reason: <unknown>
Blamelist: Miss Islington (bot)
<[email protected]>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
remote: Enumerating objects: 34, done.
remote: Counting objects: 4% (1/25)
remote: Counting objects: 8% (2/25)
remote: Counting objects: 12% (3/25)
remote: Counting objects: 16% (4/25)
remote: Counting objects: 20% (5/25)
remote: Counting objects: 24% (6/25)
remote: Counting objects: 28% (7/25)
remote: Counting objects: 32% (8/25)
remote: Counting objects: 36% (9/25)
remote: Counting objects: 40% (10/25)
remote: Counting objects: 44% (11/25)
remote: Counting objects: 48% (12/25)
remote: Counting objects: 52% (13/25)
remote: Counting objects: 56% (14/25)
remote: Counting objects: 60% (15/25)
remote: Counting objects: 64% (16/25)
remote: Counting objects: 68% (17/25)
remote: Counting objects: 72% (18/25)
remote: Counting objects: 76% (19/25)
remote: Counting objects: 80% (20/25)
remote: Counting objects: 84% (21/25)
remote: Counting objects: 88% (22/25)
remote: Counting objects: 92% (23/25)
remote: Counting objects: 96% (24/25)
remote: Counting objects: 100% (25/25)
remote: Counting objects: 100% (25/25), done.
remote: Compressing objects: 14% (1/7)
remote: Compressing objects: 28% (2/7)
remote: Compressing objects: 42% (3/7)
remote: Compressing objects: 57% (4/7)
remote: Compressing objects: 71% (5/7)
remote: Compressing objects: 85% (6/7)
remote: Compressing objects: 100% (7/7)
remote: Compressing objects: 100% (7/7), done.
remote: Total 34 (delta 18), reused 18 (delta 18), pack-reused 9
>From https://github.com/python/cpython
* branch 3.11 -> FETCH_HEAD
Note: switching to 'f5d9980217b2f36d095aa58a9b949b828f113082'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f5d9980217 [3.11] gh-114257: Ignore the FileNotFound error in
ctypes.util._is_elf() (GH-114394) (GH-114445)
Switched to and reset branch '3.11'
configure: WARNING: s390x-ibm-linux-gnu/clang is not supported
configure: WARNING:
Platform "s390x-ibm-linux-gnu" with compiler "clang" is not supported by the
CPython core team, see https://peps.python.org/pep-0011/ for more information.
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
Kill <WorkerThread #2 running test=test_posix pid=2447394 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #2 running test=test_posix
pid=2447394 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang/build/python',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests":
[], "match_tests_dict": null, "rerun": false, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources":
["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess",
"urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true,
"random_seed": 1941146400, "json_file": {"file": 6, "file_type": "UNIX_FD"},
"__runtests__": true}'], 30.0)
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang/build/Lib/subprocess.py:1127:
ResourceWarning: subprocess 2447394 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
Kill <WorkerThread #1 running test=test_posix pid=2467815 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #1 running test=test_posix
pid=2467815 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang/build/python',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests":
[], "match_tests_dict": {}, "rerun": true, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources":
["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess",
"urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true,
"random_seed": 1941146400, "json_file": {"file": 4, "file_type": "UNIX_FD"},
"__runtests__": true}'], 30.0)
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z.clang/build/Lib/subprocess.py:1127:
ResourceWarning: subprocess 2467815 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
make: *** [Makefile:1848: buildbottest] Error 2
Test report
===========
Failed tests:
- test_posix
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder s390x Fedora
Rawhide 3.11 while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/999/builds/1191
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-fedora-rawhide-z
Build Reason: <unknown>
Blamelist: Miss Islington (bot)
<[email protected]>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
remote: Enumerating objects: 34, done.
remote: Counting objects: 3% (1/27)
remote: Counting objects: 7% (2/27)
remote: Counting objects: 11% (3/27)
remote: Counting objects: 14% (4/27)
remote: Counting objects: 18% (5/27)
remote: Counting objects: 22% (6/27)
remote: Counting objects: 25% (7/27)
remote: Counting objects: 29% (8/27)
remote: Counting objects: 33% (9/27)
remote: Counting objects: 37% (10/27)
remote: Counting objects: 40% (11/27)
remote: Counting objects: 44% (12/27)
remote: Counting objects: 48% (13/27)
remote: Counting objects: 51% (14/27)
remote: Counting objects: 55% (15/27)
remote: Counting objects: 59% (16/27)
remote: Counting objects: 62% (17/27)
remote: Counting objects: 66% (18/27)
remote: Counting objects: 70% (19/27)
remote: Counting objects: 74% (20/27)
remote: Counting objects: 77% (21/27)
remote: Counting objects: 81% (22/27)
remote: Counting objects: 85% (23/27)
remote: Counting objects: 88% (24/27)
remote: Counting objects: 92% (25/27)
remote: Counting objects: 96% (26/27)
remote: Counting objects: 100% (27/27)
remote: Counting objects: 100% (27/27), done.
remote: Compressing objects: 20% (1/5)
remote: Compressing objects: 40% (2/5)
remote: Compressing objects: 60% (3/5)
remote: Compressing objects: 80% (4/5)
remote: Compressing objects: 100% (5/5)
remote: Compressing objects: 100% (5/5), done.
remote: Total 34 (delta 22), reused 22 (delta 22), pack-reused 7
>From https://github.com/python/cpython
* branch 3.11 -> FETCH_HEAD
Note: switching to 'f5d9980217b2f36d095aa58a9b949b828f113082'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by switching back to a branch.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -c with the switch command. Example:
git switch -c <new-branch-name>
Or undo this operation with:
git switch -
Turn off this advice by setting config variable advice.detachedHead to false
HEAD is now at f5d9980217 [3.11] gh-114257: Ignore the FileNotFound error in
ctypes.util._is_elf() (GH-114394) (GH-114445)
Switched to and reset branch '3.11'
Objects/longobject.c: In function ‘long_format_binary’:
Objects/longobject.c:2062:13: warning: ‘kind’ may be used uninitialized
[-Wmaybe-uninitialized]
2062 | else if (kind == PyUnicode_1BYTE_KIND) {
| ^
Objects/longobject.c:1938:25: note: ‘kind’ was declared here
1938 | enum PyUnicode_Kind kind;
| ^~~~
Objects/longobject.c: In function ‘long_to_decimal_string_internal’:
Objects/longobject.c:1885:13: warning: ‘kind’ may be used uninitialized
[-Wmaybe-uninitialized]
1885 | else if (kind == PyUnicode_1BYTE_KIND) {
| ^
Objects/longobject.c:1720:25: note: ‘kind’ was declared here
1720 | enum PyUnicode_Kind kind;
| ^~~~
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
renaming build/scripts-3.11/pydoc3 to build/scripts-3.11/pydoc3.11
renaming build/scripts-3.11/idle3 to build/scripts-3.11/idle3.11
renaming build/scripts-3.11/2to3 to build/scripts-3.11/2to3-3.11
Kill <WorkerThread #6 running test=test_posix pid=2399861 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #6 running test=test_posix
pid=2399861 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z/build/python',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests":
[], "match_tests_dict": null, "rerun": false, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources":
["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess",
"urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true,
"random_seed": 1755663280, "json_file": {"file": 13, "file_type": "UNIX_FD"},
"__runtests__": true}'], 30.0)
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z/build/Lib/subprocess.py:1127:
ResourceWarning: subprocess 2399861 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
Kill <WorkerThread #1 running test=test_posix pid=2422343 time=25 min> process
group
Warning -- Failed to wait for <WorkerThread #1 running test=test_posix
pid=2422343 time=25 min 30 sec> completion (timeout=30.0 sec):
TimeoutExpired(['/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z/build/python',
'-bb', '-E', '-Wdefault', '-u', '-m', 'test.libregrtest.worker', '{"tests":
["test_posix"], "fail_fast": false, "fail_env_changed": true, "match_tests":
[], "match_tests_dict": {}, "rerun": true, "forever": false, "pgo": false,
"pgo_extended": false, "output_on_failure": false, "timeout": 1200.0,
"verbose": true, "quiet": false, "hunt_refleak": null, "test_dir": null,
"use_junit": true, "memory_limit": null, "gc_threshold": null, "use_resources":
["audio", "curses", "largefile", "network", "decimal", "cpu", "subprocess",
"urlfetch", "gui", "walltime"], "python_cmd": null, "randomize": true,
"random_seed": 1755663280, "json_file": {"file": 4, "file_type": "UNIX_FD"},
"__runtests__": true}'], 30.0)
/home/dje/cpython-buildarea/3.11.edelsohn-fedora-rawhide-z/build/Lib/subprocess.py:1127:
ResourceWarning: subprocess 2422343 is still running
_warn("subprocess %s is still running" % self.pid,
ResourceWarning: Enable tracemalloc to get the object allocation traceback
make: *** [Makefile:1848: buildbottest] Error 2
Test report
===========
Failed tests:
- test_posix
Sincerely,
-The BuildbotThe Buildbot has detected a new failure on builder s390x RHEL8
LTO + PGO 3.11 while building python/cpython.
Full details are available at:
https://buildbot.python.org/all/#/builders/945/builds/1215
Buildbot URL: https://buildbot.python.org/all/
Worker for this Build: edelsohn-rhel8-z
Build Reason: <unknown>
Blamelist: Miss Islington (bot)
<[email protected]>
BUILD FAILED: failed test (failure)
Summary of the results of the build (if available):
===================================================
==
Captured traceback
==================
Traceback (most recent call last):
File
"/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z.lto-pgo/build/Lib/test/test_nntplib.py",
line 332, in setUpClass
cls.server = cls.NNTP_CLASS(cls.NNTP_HOST, **kwargs)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File
"/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z.lto-pgo/build/Lib/nntplib.py",
line 341, in __init__
self._base_init(readermode)
File
"/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z.lto-pgo/build/Lib/nntplib.py",
line 355, in _base_init
self.welcome = self._getresp()
^^^^^^^^^^^^^^^
File
"/home/dje/cpython-buildarea/3.11.edelsohn-rhel8-z.lto-pgo/build/Lib/nntplib.py",
line 490, in _getresp
raise NNTPProtocolError(resp)
nntplib.NNTPProtocolError: /home/news/bin/nnrpd: error while loading shared
libraries: libperl.so.5.32: cannot open shared object file: No such file or
directory
Test report
===========
Failed tests:
- test_nntplib
Failed subtests:
- setUpClass - test.test_nntplib.NetworkedNNTPTests
Sincerely,
-The Buildbot
_______________________________________________
Buildbot-status mailing list -- [email protected]
To unsubscribe send an email to [email protected]
https://mail.python.org/mailman3/lists/buildbot-status.python.org/
Member address: [email protected]
