Heinz Junkes commented: https://gitlab.rtems.org/rtems/rtos/rtems/-/issues/5386#note_135606 Unfortunately, the behavior is the same on another CPU: ``` Now BSP_mem_size = 0x1fe00000 Configuration.work_space_size = f99e0 Page table setup finished; will activate it NOW... Going to start PCI buses scanning and initialization Number of PCI buses found is : 3 MSR 0x2003032 Exit from bspstart unable to find the universe in pci config space Tundra Tsi148 PCI-VME bridge detected at 0x81100000, IRQ 84 Tsi148 Outbound Ports: Port VME-Addr Size PCI-Adrs Mode: 0: 0x20000000 0x0e000000 0x90000000 A32, SUP, D32, SCT 1: 0x00000000 0x00ff0000 0x9f000000 A24, SUP, D32, SCT 2: 0x00000000 0x00010000 0x9fff0000 A16, SUP, D32, SCT 7: 0x00000000 0x01000000 0x9e000000 CSR, SUP, D32, SCT Tsi148 Inbound Ports: Port VME-Addr Size PCI-Adrs Mode: 0: 0x90000000 0x1fe00000 0x00000000 A32, PGM, DAT, SUP, USR, MBLT, BLT vmeTsi148 IRQ manager: looking for registers on VME... Trying to find CSR on VME... vmeTsi148 - IRQ manager using VME CSR to flush FIFO Registering /dev/console as minor 0 (==/dev/ttyS0) Startup. time set to : 04/14/24 07:30:35.000006119 UTC ***** RTEMS Version: rtems-6.0.0 (PowerPC/Generic (classic FPU)/beatnik) ***** ***** Initializing network (libbsd) ***** _taskqueue_start_threads: kthread_add(kqueue_ctx taskq): error 12emerg: kproc_create() failed with 12 ``` What strikes me is that after "Registering /dev/console ..." it takes a very long time for the next output to appear. -- View it on GitLab: https://gitlab.rtems.org/rtems/rtos/rtems/-/issues/5386#note_135606 You're receiving this email because of your account on gitlab.rtems.org.
_______________________________________________ bugs mailing list [email protected] http://lists.rtems.org/mailman/listinfo/bugs
