And another lspci from the installer in AHCI mode El lun, 16 ago 2021 a las 21:17, Almudena Garcia (< liberamenso10...@gmail.com>) escribió:
> Another lspci from Manjaro Linux in live mode, enabling AHCI in BIOS > > > > > > El lun, 16 ago 2021 a las 21:11, Almudena Garcia (< > liberamenso10...@gmail.com>) escribió: > >> > Is it really in AHCI mode? >> Check first and second image >> >> > we need to know what >> > is actually showing up exactly in lspci, to be sure that the card is >> > showing up really in AHCI-compatible mode. >> >> Next images >> >> El lun, 16 ago 2021 a las 20:47, Almudena Garcia (< >> liberamenso10...@gmail.com>) escribió: >> >>> > Is it really in AHCI mode? >>> >>> Yes, I enabled AHCI SATA mode in the BIOS >>> >>> > This is talking about wd0, i.e. the rumpdisk device, i.e. gnumach >>> > didn't detect the AHCI card. That's not expected, we need to know what >>> > is actually showing up exactly in lspci, to be sure that the card is >>> > showing up really in AHCI-compatible mode. >>> >>> I will try to execute it in rescue mode (the current Debian GNU/Hurd >>> 2021 installation in compatibility mode has generate some errors and I >>> can't access to tty. Next report) >>> >>> > Alternatively you could try to reboot to have the partition re-read. >>> But >>> > still it's not expected that partition re-read doesn't work, it is >>> > implemented and works in my tests. As usual, actual error messages are >>> > what you want to show, i.e. console 4 (or posssibly more conveniently, >>> > /var/log/syslog) >>> >>> I tried it many times. If I do a installation in IDE mode and, after >>> this, I try a new installation in AHCI mode, the installer detects the >>> partitions correctly. But then fails in the "base system packages" step. >>> >>> > "no more room" looks like somehow rumpdisk is trying to handle more >>> data >>> > than it can. What is the actual size of your disk? I don't know what >>> > sizes where actually tested at all. >>> >>> My harddisk has ~ 320 GB >>> >>> Thanks for your response, I will try to get more information >>> >>> >>> El lun, 16 ago 2021 a las 20:34, Samuel Thibault (< >>> samuel.thiba...@gnu.org>) escribió: >>> >>>> Hello, >>>> >>>> Almudena Garcia, le dim. 15 août 2021 02:04:38 +0200, a ecrit: >>>> > Tonight I'm trying to install Debian GNU/Hurd 2021 in a Thinkpad T410, >>>> > configuring SATA disk in AHCI mode, >>>> >>>> Is it really in AHCI mode? >>>> >>>> > The installer loads, but in partitioning step, after format the >>>> partitions, I >>>> > found this advice (first attached image) >>>> >>>> This is talking about wd0, i.e. the rumpdisk device, i.e. gnumach >>>> didn't detect the AHCI card. That's not expected, we need to know what >>>> is actually showing up exactly in lspci, to be sure that the card is >>>> showing up really in AHCI-compatible mode. >>>> >>>> > If I try to continue, >>>> >>>> Alternatively you could try to reboot to have the partition re-read. But >>>> still it's not expected that partition re-read doesn't work, it is >>>> implemented and works in my tests. As usual, actual error messages are >>>> what you want to show, i.e. console 4 (or posssibly more conveniently, >>>> /var/log/syslog) >>>> >>>> > the installer format the partitions and then appears >>>> > these errors (rest of images) >>>> >>>> "no more room" looks like somehow rumpdisk is trying to handle more data >>>> than it can. What is the actual size of your disk? I don't know what >>>> sizes where actually tested at all. >>>> >>>> Samuel >>>> >>>
