On Wed, Feb 11, 2004 at 02:00:48PM +0100, M. Gerards wrote:
> Quoting "Dmitry V. Zhulanov" <[EMAIL PROTECTED]>:
>
> > On Tue, Feb 10, 2004 at 08:27:14PM +0100, Marco Gerards wrote:
> > > [EMAIL PROTECTED] (Dmitry V. Zhulanov) writes:
> > >
> > > > When I start console with vga and pc_kbd drivers my screen
> > > > blanks, and ctrl-alt-backspace does nothing. How can I found the
> > problem?
> > >
> > > Can you start the console client from telnet or a serial console?
> >
> > Starting in.telnetd exited with message:
> > --
> > telnetd: getpeername: (ipc/mig) bad request message ID
>
> You have to start the telnetd from inetd, AFAIK. Are you doing this?
Now yes, and telnet works fine.
>
> Otherwise try the serial console or ssh.
Its works too
>
> > May be rpctrace will be more informative? its size about 6.5k
>
> Perhaps, but it would be more useful to know if it segfaults or
> not. Please send it to be sure.
The probles is not segfaults, because ctrl-alt-bksps works
>
> > > First you will have to find out if it segfaults, otherwise you can
> > > better attach gdb to the console client and debug the pc_kbd driver.
Now I haven't another computer to do this remotely, but here some
additional info:
input hangs in a next fragment of code from pc_kbd_start:
============
if(gnumach_v1_compat)
{
int data = KB_EVENT;
err = device_set_status (kbd_dev, KDSKBDMODE,
&data, 1); // here gdb hangs
if(err)
=============
also if I press keys many times soon I see message "kbd: queue full" for
each key press
when I can access to another box, I check it remotely.
> If you would try this without the vga driver you can see what is going on, so
> you would have to do:
>
> console -d pc_kbd /dev/vcs
>
> And please send any output you see (if any) to this list.
Only clear new line after command line
>
> You can also try the ncursesw driver, if you think it is a problem
> of the keyboard driver:
>
> console -d ncursesw /dev/vcs
It hangs and even ctrl-alt-bksps doesn't work, and now I cant check it
if it works romotely.
>
> I have checked in a patch I wrote for pc_kbd a while ago. I hope this
> does not cause your problem, although I have tested it and it should work.
> Are you using the CVS of after or before this patch was committed?
console-client works fine before last recompiling hurd, and I dont know
what changed in it. All sources was same.
>
> > > It's also useful to know which GNUMach version you are using and which
> > > version of the Hurd (CVS or a debian package?)
> > Im using GNUmach-1.2/Hurd-0.3 from cvs with age about two weeks.
>
> I have used GNUMach 1.2 and the Hurd from CVS just a week ago and this
> worked perfectly for me. Perhaps your configuration is not correct
where I can get new souces, most of links dead :(
> (/dev/tty[1-9] and /dev/ttys and /dev/vcs) but in that case ctrl+alt+bs
> should work. Because of that it sounds like a segfault.
configuration does not changed after recompiling hurd, I check it, and
it looks fine.
>
> --
> Marco
e
_______________________________________________
Bug-hurd mailing list
[EMAIL PROTECTED]
http://mail.gnu.org/mailman/listinfo/bug-hurd
