Package: libwrap0 Status: install ok unpacked Priority: standard Section: base Installed-Size: 120 Maintainer: Anthony Towns Source: tcp-wrappers Version: 7.6-8.3 Depends: libc0.2 (>= 2.2.3-7) Recommends: tcpd Conflicts: netbase (<< 3.16-1) Description: Wietse Venema's TCP wrappers library Wietse Venema's network logger, also known as TCPD or LOG_TCP. . These programs log the client host name of incoming telnet, ftp, rsh, rlogin, finger etc. requests. Security options are: access control per host, domain and/or service; detection of host name spoofing or host address spoofing; booby traps to implement an early-warning system. Package: ncurses-base Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 222 Maintainer: Daniel Jacobowitz Source: ncurses Version: 5.2.20010318-3 Replaces: ncurses-term Provides: ncurses-runtime Conflicts: ncurses, ncurses-runtime Conffiles: /etc/terminfo/a/ansi newconffile /etc/terminfo/d/dumb newconffile /etc/terminfo/l/linux newconffile /etc/terminfo/m/mach newconffile /etc/terminfo/m/mach-bold newconffile /etc/terminfo/m/mach-color newconffile /etc/terminfo/p/pcansi newconffile /etc/terminfo/r/rxvt newconffile /etc/terminfo/r/rxvt-m newconffile /etc/terminfo/s/screen newconffile /etc/terminfo/s/screen-w newconffile /etc/terminfo/s/sun newconffile /etc/terminfo/v/vt100 newconffile /etc/terminfo/v/vt102 newconffile /etc/terminfo/v/vt220 newconffile /etc/terminfo/v/vt52 newconffile /etc/terminfo/x/xterm newconffile /etc/terminfo/x/xterm-color newconffile /etc/terminfo/x/xterm-debian newconffile /etc/terminfo/x/xterm-mono newconffile /etc/terminfo/x/xterm-r5 newconffile /etc/terminfo/x/xterm-r6 newconffile /etc/terminfo/x/xterm-vt220 newconffile /etc/terminfo/x/xterm-xfree86 newconffile Description: Descriptions of common terminal types This package contains what should be a reasonable subset of terminal definitions, including: ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220, vt52, and xterm. Package: adduser Status: install ok unpacked Priority: important Section: base Installed-Size: 396 Maintainer: Roland Bauerschmidt Version: 3.42 Depends: perl-base (>= 5.6.0), passwd (>= 961025), debconf Suggests: liblocale-gettext-perl Conffiles: /etc/deluser.conf newconffile Description: Add and remove users and groups to resp. from the system. This package includes the adduser and deluser commands for creating and removing users. . o Adduser can create new users and groups and add existing users to existing groups. o Deluser can remove users and groups and remove users from specific groups. . Adding users with adduser is much easier than adding them by hand. Adduser will choose appropriate UID and GID values, create a home directory, copy skeletal user configuration, allow you to set an initial password and gecos. . Deluser can optionally remove and backup the user's home directory and mail spool or all files on the system owned by him. . Optionally a custom script can be executed after each of the commands Package: textutils Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 1748 Maintainer: Herbert Xu Version: 2.0-10 Replaces: bsdmainutils (<= 4.5.2), ptx Provides: ptx Pre-Depends: libc0.2 (>= 2.2.3-7) Conflicts: ptx Description: The GNU text file processing utilities. The utilities: cat cksum comm csplit cut expand fmt fold head join md5sum nl od paste pr ptx sort split sum tac tail tr tsort unexpand uniq wc. Package: bsdutils Essential: yes Status: install ok installed Priority: required Section: base Installed-Size: 102 Maintainer: Charles Briscoe-Smith Version: 4.4.1.1 Depends: sysvinit (>= 2.59-2), shellutils (>= 1.15-3) Pre-Depends: libc0.2 (>= 2.1) Recommends: bsdmainutils Description: Basic utilities from 4.4BSD-Lite. This package contains the bare minimum number of BSD utilities needed to boot a Debian system. You should probably also install bsdmainutils to get the remaining standard BSD utilities. . Included are: kill, logger, renice, script, wall Package: gnumach Status: install ok unpacked Priority: optional Section: base Installed-Size: 870 Maintainer: GNU Hurd Maintainers Version: 1:20011013-1 Description: The GNU version of the Mach microkernel This is the Utah Mach microkernel used by the Hurd. Package: grub Status: install ok unpacked Priority: optional Section: admin Installed-Size: 564 Maintainer: Jason Thomas Version: 0.90-9 Depends: libc0.2 (>= 2.2.3-7), libncurses5 (>= 5.2.20010310-1) Suggests: grub-doc Description: GRand Unified Bootloader GRUB is a GPLed bootloader intended to unify bootloading across x86 operating systems. In addition to loading the Linux and *BSD kernels, it implements the Multiboot standard, which allows for flexible loading of multiple boot images (needed for modular kernels such as the GNU Hurd). Package: sed Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 304 Maintainer: Robert van der Meulen Version: 3.02-8 Pre-Depends: libc0.2 (>= 2.2.1-2) Description: The GNU sed stream editor. sed reads the specified files or the standard input if no files are specified, makes editing changes according to a list of commands, and writes the results to the standard output. Package: passwd Status: install ok unpacked Priority: required Section: base Installed-Size: 932 Maintainer: Karl Ramm Source: shadow Version: 20000902-7 Depends: libc0.2 (>= 2.2.3-7) Conflicts: suidregister (<< 0.50) Conffiles: /etc/shells newconffile Description: Change and administer password and group data. This package includes passwd, chsh, chfn, and many other programs to maintain password and group data. . Shadow passwords are supported. See /usr/share/doc/passwd/README.Debian.gz Package: base-passwd Essential: yes Status: install ok installed Installed-Size: 92 Maintainer: Wichert Akkerman Version: 3.2.1 Replaces: base Depends: libc0.2 (>= 2.2.1-2) Description: Debian Base System Password/Group Files This package provides the master /etc/passwd and /etc/group files, containing Debian-allocated user and group IDs, plus the update-passwd utility to keep them up to date. Package: apt Status: install ok unpacked Priority: standard Section: base Installed-Size: 1816 Maintainer: APT Development Team Version: 0.5.4 Replaces: libapt-pkg-doc (<< 0.3.7), libapt-pkg-dev (<< 0.3.7) Provides: libapt-pkg-libc6.2-2.10.0-3.2 Depends: libc0.2 (>= 2.2.3-7), libstdc++2.10 Suggests: dpkg-dev Description: Advanced front-end for dpkg This is Debian's next generation front-end for the dpkg package manager. It provides the apt-get utility and APT dselect method that provides a simpler, safer way to install and upgrade packages. . APT features complete installation ordering, multiple source capability and several other unique features, see the Users Guide in /usr/share/doc/apt/guide.text.gz Package: zlib1g Status: install ok unpacked Priority: standard Section: libs Installed-Size: 136 Maintainer: Mark Brown Source: zlib Version: 1:1.1.3-16 Provides: libz1 Depends: libc0.2 (>= 2.2.3-7) Conflicts: zlib1 (<= 1:1.0.4-7) Description: compression library - runtime zlib is a library implementing the deflate compression method found in gzip and pkzip. This package includes the shared library. Package: libpam-modules Status: install ok unpacked Priority: required Section: base Installed-Size: 540 Maintainer: Sam Hartman Source: pam Version: 0.72-33 Replaces: libpam0g-util Provides: libpam-motd, libpam-mkhomedir Depends: libc0.2 (>= 2.2.3-7), libdb3 (>= 3.2.9-1), libpam0g (>= 0.72-1) Conflicts: libpam0g-modules (= 0.66-1), libpam-motd, libpam-mkhomedir, suidmanager (<< 0.50) Conffiles: /etc/security/access.conf newconffile /etc/security/group.conf newconffile /etc/security/pam_env.conf newconffile /etc/security/time.conf newconffile Description: Pluggable Authentication Modules for PAM This package completes the set of modules for PAM. It includes the the pam_unix_*.so module as well as some specialty modules. Package: ncurses-bin Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 560 Maintainer: Daniel Jacobowitz Source: ncurses Version: 5.2.20010318-3 Provides: tput Pre-Depends: libc0.2 (>= 2.2.3-7), libncurses5 (>= 5.2.20010310-1) Conflicts: ncurses, tput Description: Terminal-related programs and man pages This package contains the programs used for manipulating the terminfo database and individual terminfo entries, as well as some programs for resetting terminals and such. Package: tar Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 1140 Maintainer: Bdale Garbee Version: 1.13.22-1 Pre-Depends: libc0.2 (>= 2.2.3-7) Suggests: bzip2 Description: GNU tar Tar is a program for packaging a set of files as a single archive in tar format. The function it performs is conceptually similar to cpio, and to things like pkzip in the DOS world. It is heavily used by the Debian package management system, and is useful for performing system backups and exchanging sets of files with others. Package: gettext-base Status: install ok unpacked Priority: standard Section: base Installed-Size: 1064 Maintainer: Santiago Vila Source: gettext Version: 0.10.40-1 Replaces: gettext (<= 0.10.35-8) Depends: libc0.2 (>= 2.2.3-7) Description: GNU Internationalization utilities for the base system This package includes the gettext program which allow other packages to internationalize the messages given by shell scripts. Package: gzip Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 212 Maintainer: Bdale Garbee Version: 1.2.4-33 Depends: debianutils (>= 1.6) Pre-Depends: libc0.2 (>= 2.1) Description: The GNU compression utility. This is the standard GNU file compression utility, which is also the default compression tool for Debian. It typically operates on files with names ending in '.gz'. . This package can also decompress '.Z' files created with 'compress'. Package: libpam0g Status: install ok unpacked Priority: required Section: base Installed-Size: 156 Maintainer: Sam Hartman Source: pam Version: 0.72-33 Replaces: libpam0g-util Depends: libc0.2 (>= 2.2.3-7), libpam-runtime Suggests: libpam-doc Conflicts: libpam0 (<= 0.56-2), libpam Description: Pluggable Authentication Modules library Contains the C shared library for Linux-PAM, a suite of shared libraries that enable the local system administrator to choose how applications authenticate users. In other words, without rewriting or recompiling a PAM-aware application, it is possible to switch between the authentication mechanism(s) it uses. One may entirely upgrade the local authentication system without touching the applications themselves. Package: dpkg Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 3064 Maintainer: Wichert Akkerman Version: 1.9.17 Replaces: dpkg-doc-ja Pre-Depends: hurd, libc0.2 (>= 2.2.3-7), libncurses5 (>= 5.2.20010310-1), libstdc++2.10 (>= 1:2.95.4-0.010810) Conflicts: sysvinit (<< 2.80) Conffiles: /etc/dpkg/dpkg.cfg newconffile /etc/dpkg/dselect.cfg newconffile /etc/dpkg/origins/debian newconffile Description: Package maintenance system for Debian This package contains the programs which handle the installation and removal of packages on your system. . The primary interface for the dpkg suite is the `dselect' program; a more low-level and less user-friendly interface is available in the form of the `dpkg' command. . In order to unpack and build Debian source packages you will need to install the developers' package `dpkg-dev' as well as this one. Package: base-files Essential: yes Status: install ok installed Priority: required Section: base Installed-Size: 352 Maintainer: Santiago Vila Version: 2.2.13 Replaces: base, miscutils, libreadline, libreadlineg2 (<< 2.1-16), bash (<< 2.03-3) Provides: base Depends: awk, base-passwd (>= 2.0.3.4) Conffiles: /etc/debian_version c42c466e26c4e1a96ad73ad92a468337 /etc/host.conf a61b9f6548d337c1cc1e5a4de39f7b7f /etc/inputrc cbe06f78eaed38fd2058fb1a8c646f2b /etc/issue a9af4955b86166a1f8d06353b647075e /etc/issue.net c383cb705dd3d7120d3ff79ec35a2c37 /etc/nsswitch.conf 109e33e2c91d1853b5bc56078a96aa18 /etc/profile c437b4301366e5f88959c7b22ac922fd Description: Debian base system miscellaneous files This package contains the basic filesystem hierarchy of a Debian system, and several important miscellaneous files, such as /etc/debian_version, /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, /etc/nsswitch.conf, and others, and the text of several common licenses in use on Debian systems. Package: nano Status: install ok unpacked Priority: important Section: editors Installed-Size: 728 Maintainer: Jordi Mallach Version: 1.0.5-1 Provides: editor Depends: libc0.2 (>= 2.2.3-7), libncurses5 (>= 5.2.20010310-1) Suggests: spell Conflicts: nano-tiny (<= 1.0.0-1) Description: free Pico clone with some new features GNU nano is a free replacement for Pico, the default Pine editor. Pine is copyrighted under a slightly restrictive license, that makes it unsuitable for Debian's main section. GNU nano is an effort to provide a Pico-like editor, but also includes some features that were missing in the original, such as 'search and replace', 'goto line' or internationalization support. As it's written from scratch, it's smaller and faster. Package: findutils Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 620 Maintainer: Kevin Dalley Version: 4.1.7-2 Pre-Depends: libc0.2 (>= 2.2.1-2) Conffiles: /etc/cron.daily/find newconffile /etc/updatedb.conf newconffile Description: utilities for finding files--find, xargs, and locate These utilities find files meeting specified criteria and perform various actions on the files which are found. Package: shellutils Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 2232 Maintainer: Michael Stone Version: 2.0.11-11 Replaces: bsdutils (<= 3.0-2), util-linux (<< 2.9e-0.1) Pre-Depends: libc0.2 (>= 2.2.3-7), login | hurd Conflicts: login (<< 19990827-1), suidmanager (<< 0.50) Description: The GNU shell programming utilities. The utilities: basename chroot date dirname echo env expr factor false groups hostid id logname nice nohup pathchk pinky printenv printf pwd seq sleep stty tee test true tty uname users who whoami yes. Package: inetutils Status: install ok unpacked Installed-Size: 440 Maintainer: Marcus Brinkmann Version: 1:20010817 Replaces: whois Provides: netbase, netstd, whois Depends: tcpd, libc0.2 (>= 2.2.3-7), libncurses5 (>= 5.2.20010310-1), libreadline4 (>= 4.2-2), zlib1g (>= 1:1.1.3) Conflicts: whois, hurd (<= 20010718-1) Conffiles: /etc/init.d/inetutils newconffile Description: GNU networking utilities The GNU network utilities used by GNU Hurd. Package: slang1 Status: install ok unpacked Priority: required Section: base Installed-Size: 424 Maintainer: Jim Mintha Source: slang Version: 1.4.4-5 Depends: libc0.2 (>= 2.2.3-7) Conflicts: slang1-utf8 Description: The S-Lang programming library - runtime version. S-Lang is a C programmer's library that includes routines for the rapid development of sophisticated, user friendly, multi-platform applications. . This package contains only the shared library libslang.so.* and copyright information. It is only necessary for programs that use this library (such as jed and slrn). If you plan on doing development with S-Lang, you will need the companion -dev package as well. Package: less Status: install ok unpacked Priority: standard Section: text Installed-Size: 236 Maintainer: Thomas Schoepf Version: 358-10 Depends: libc0.2 (>= 2.2.3-7), libncurses5 (>= 5.2.20010310-1), debianutils (>= 1.8) Description: A file pager program, similar to more(1) Less is a program similar to more (1), but which allows backward movement in the file as well as forward movement. Also, less does not have to read the entire input file before starting, so with large input files it starts up faster than text editors like vi (1). Less uses termcap (or terminfo on some systems), so it can run on a variety of terminals. There is even limited support for hardcopy terminals. . Homepage: http://www.greenwoodsoftware.com/less/ Package: libpam-runtime Status: install ok unpacked Priority: required Section: base Installed-Size: 132 Maintainer: Sam Hartman Source: pam Version: 0.72-33 Replaces: libpam0g-util, libpam0g-dev Conflicts: libpam0g-util, libpam0g (<< 0.66-0) Conffiles: /etc/pam.conf newconffile /etc/pam.d/other newconffile Description: Runtime support for the PAM library Contains the base setup for libpam Package: libperl5.6 Status: install ok unpacked Priority: required Section: libs Installed-Size: 836 Maintainer: Brendan O'Dea Source: perl Version: 5.6.1-5 Suggests: perl-base (= 5.6.1-5) Description: Shared Perl library. Provides a shared library for programs which embed a Perl interpreter. This includes the /usr/bin/perl binary on architectures other than i386 (where there is a measured performance hit when perl is dynamically linked). Package: hurd Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 4868 Maintainer: GNU Hurd Maintainers Version: 20011016-1 Replaces: makedev, login Provides: makedev, login Depends: libc0.2 (>= 2.2.3-7) Conflicts: makedev, login Conffiles: /boot/servers.boot newconffile /etc/ttys newconffile /etc/login/.bash_login newconffile /etc/login/.bashrc newconffile /etc/login/.hushlogin newconffile /etc/login/.profile newconffile /etc/login/README newconffile Description: The GNU Hurd This is the GNU Hurd package. It contains essential system software and libraries. Package: syslogd Status: install ok unpacked Installed-Size: 97 Maintainer: Marcus Brinkmann Source: inetutils Version: 1:20010817 Provides: sysklogd Depends: libc0.2 (>= 2.2.3-7), libreadline4 (>= 4.2-2), zlib1g (>= 1:1.1.3) Conffiles: /etc/init.d/syslogd newconffile Description: System logging daemon The syslog daemon is responsible for providing logging of messages received from programs and facilities on the local host as well as from remote hosts. Package: grep Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 684 Maintainer: Robert van der Meulen Version: 2.4.2-2 Provides: rgrep Pre-Depends: libc0.2 (>= 2.2.1-2) Conflicts: rgrep Description: GNU grep, egrep and fgrep. The GNU family of grep utilities may be the "fastest grep in the west". GNU grep is based on a fast lazy-state deterministic matcher (about twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper search for a fixed string that eliminates impossible text from being considered by the full regexp matcher without necessarily having to look at every character. The result is typically many times faster than Unix grep or egrep. (Regular expressions containing backreferencing will run more slowly, however.) Package: e2fsprogs Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 816 Maintainer: Yann Dirson Version: 1.25-1 Provides: libcomerr2, libss2, libext2fs2, libe2p2, libuuid1 Pre-Depends: libc0.2 (>= 2.2.3-7) Suggests: gpart, parted, e2fsck-static Conflicts: e2fslibsg, dump (<< 0.4b4-4), quota (<< 1.55-8.1) Description: The EXT2 file system utilities and libraries. EXT2 stands for "Extended Filesystem", version 2. It's the main filesystem type used for hard disks on Debian and other Linux systems. . This package contains programs for creating, checking, and maintaining EXT2 filesystems, and the generic `fsck' wrapper. Package: ed Status: install ok unpacked Priority: important Section: editors Installed-Size: 152 Maintainer: James Troup Version: 0.2-19 Depends: libc0.2 (>= 2.2.1-2) Description: The classic unix line editor ed is a line-oriented text editor. It is used to create, display, modify and otherwise manipulate text files. . red is a restricted ed: it can only edit files in the current directory and cannot execute shell commands. Package: groff-base Status: install ok unpacked Priority: important Section: text Installed-Size: 1824 Maintainer: Colin Watson Source: groff Version: 1.17.2-7 Replaces: groff (<< 1.17.2-2), jgroff (<< 1.17-1) Depends: libc0.2 (>= 2.2.3-7), libstdc++2.10 (>= 1:2.95.4-0.010810) Suggests: groff, groff-x11 Conflicts: groff (<< 1.17-1), jgroff (<< 1.17-1), pmake (<< 1.45-7), troffcvt (<< 1.04-14) Conffiles: /etc/groff/man.local newconffile /etc/groff/mdoc.local newconffile Description: GNU troff text-formatting system (base system components) This package contains the traditional UN*X text formatting tools troff, nroff, tbl, eqn, and pic. These utilities, together with the man-db package, are essential for displaying the on-line manual pages. . groff-base is a stripped-down package containing the necessary components to read manual pages in ASCII, Latin-1, and UTF-8. Users who want a full groff installation, with the standard set of devices, fonts, macros, and documentation, should install the groff package. Package: tcpd Status: install ok unpacked Priority: standard Section: base Installed-Size: 156 Maintainer: Anthony Towns Source: tcp-wrappers Version: 7.6-8.3 Replaces: libwrap0 (<< 7.6-8) Depends: libc0.2 (>= 2.2.3-7), libwrap0 (>= 7.6-1.1) Conflicts: netbase (<< 3.16-1) Description: Wietse Venema's TCP wrapper utilities Wietse Venema's network logger, also known as TCPD or LOG_TCP. . These programs log the client host name of incoming telnet, ftp, rsh, rlogin, finger etc. requests. Security options are: access control per host, domain and/or service; detection of host name spoofing or host address spoofing; booby traps to implement an early-warning system. Package: perl-base Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 1508 Maintainer: Brendan O'Dea Source: perl Version: 5.6.1-5 Replaces: perl-5.005-base (<< 6), perl-5.6-base (<< 6), perl (<< 5.6.1-1), perl-modules (<< 5.6.1-4) Provides: perl5-base, perlapi-5.005, perlapi-5.6.0, perlapi-5.6.1, data-dumper Suggests: perl Conflicts: perl-5.004-base (<< 6), perl-5.005-base (<< 6), perl-5.6-base (<< 6), data-dumper Description: The Pathologically Eclectic Rubbish Lister. A scripting language with delusions of full language-hood, Perl is used in many system scripts and utilities. . This is a stripped down Perl with only essential libraries. To make full use of Perl, you'll want to install the `perl', `perl-modules' and optionally `perl-doc' packages which supplement this one. Package: hostname Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 92 Maintainer: Adam Heath Version: 2.09 Pre-Depends: libc0.2 (>= 2.2.1-2) Description: A utility to set/show the host name or domain name The hostname command can be used to either set or display the current host or domain name of the system. This name is used by many of the networking programs to identify the machine. The domain name is also used by NIS/YP. Package: debconf Status: install ok unpacked Priority: important Section: admin Installed-Size: 788 Maintainer: Joey Hess Version: 1.0.13 Replaces: debconf-tiny Provides: debconf-tiny Depends: fileutils (>= 4.0-5) Pre-Depends: perl-base (>= 5.6.1-4) Recommends: apt-utils (>= 0.5.1) Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, liblocale-gettext-perl, libterm-readline-gnu-perl, libgnome-perl Conflicts: debconf-utils (<< 0.9), debconf-tiny, apt (<< 0.3.12.1), menu (<= 2.1.3-1), dialog (<< 0.9a-20000730-1), whiptail (<< 0.50.8-1), cdebconf (<< 0.10-5) Conffiles: /etc/apt/apt.conf.d/70debconf newconffile /etc/debconf.conf newconffile Description: Debian configuration management system Debconf is a configuration management system for debian packages. Packages use Debconf to ask questions when they are installed. Package: fileutils Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 1900 Maintainer: Michael Stone Version: 4.1-3 Replaces: color-ls, util-linux (<= 2.7.1-1) Pre-Depends: libc0.2 (>= 2.2.3-7) Conflicts: color-ls Description: GNU file management utilities. The utilities: chgrp chmod chown cp dd df dir dircolors du install ln ls mkdir mkfifo mknod mv rm rmdir shred touch vdir sync. Package: libc0.2 Status: install ok installed Priority: required Section: base Installed-Size: 12552 Maintainer: Ben Collins Source: glibc Version: 2.2.4-3 Replaces: glibc2, ldso (<= 1.9.11-9), timezone, timezones, gconv-modules, libtricks, netkit-rpc, netbase (<< 4.0) Provides: glibc-2.2.4-3 Depends: hurd (>= 20010718-1) Conflicts: glibc2, strace (<< 4.0-0), libnss-db (<< 2.2-3), timezone, timezones, gconv-modules, libtricks, libc0.2-doc, libc6-i586, libc6-i686, libc6-v9, netkit-rpc Conffiles: /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e Description: GNU C Library: Shared libraries and Timezone data Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. Timezone data is also included. Package: libncurses5 Status: install ok unpacked Priority: required Section: base Installed-Size: 480 Maintainer: Daniel Jacobowitz Source: ncurses Version: 5.2.20010318-3 Depends: libc0.2 (>= 2.2.3-7) Description: Shared libraries for terminal handling This package contains the shared libraries necessary to run programs compiled with ncurses. Package: apt-utils Status: install ok unpacked Priority: optional Section: admin Installed-Size: 484 Maintainer: APT Development Team Source: apt Version: 0.5.4 Provides: libapt-inst-libc6.2-2.10.0-1.0 Depends: libapt-pkg-libc6.2-2.10.0-3.2, libc0.2 (>= 2.2.3-7), libdb2 (>= 2:2.7.7-4), libstdc++2.10 Description: APT utility programs This package contains some infrequently used APT utility programs such as apt-ftparchive, apt-sortpkgs and apt-extracttemplates. . apt-extracttemplates is used by debconf to prompt for configuration questions before installation. apt-ftparchive is used to create Package and other index files. apt-sortpkgs is a Package/Source file normalizer. Package: libdb2 Status: install ok installed Priority: required Section: base Installed-Size: 604 Maintainer: Ben Collins Source: db2 Version: 2:2.7.7.0-1 Replaces: libdb2.6, lib-bdb2, libc6 (<< 2.2.2-4), libc6.1 (<< 2.2.2-4), libc0.2 (<< 2.2.2-4) Depends: libc0.2 (>= 2.2.3-7) Conflicts: lib-bdb2 Description: The Berkeley database routines (run-time files). libdb2 is a library for manipulating database files, developed at Berkeley and extended by Sleepycat Software Inc. This is the stable version, also commercially supported. . It supports three kinds of file formats: * btree. A representation of a sorted, balanced tree structure. * hashed. An extensible, dynamic hashing scheme. * UNIX file oriented. A byte stream file with fixed or variable length records. Other core database services: * page cache management for fast access, clean page allocation. * lock with multiple reader/writer granularity. * nested transaction support with logging and rollback recovery (two phase commit). * Large set of utilities, to dump/load/restore data and examine log. Package: libdb3 Status: install ok unpacked Priority: required Section: libs Installed-Size: 556 Maintainer: Ben Collins Source: db3 Version: 3.2.9-11 Depends: libc0.2 (>= 2.2.3-7) Conflicts: libdb2 (<< 2:2.7.7-3) Description: Berkeley v3 Database Libraries [runtime] This is the runtime package for programs that use the Berkeley v3 database library. Package: mawk Status: install ok installed Priority: required Section: base Installed-Size: 232 Maintainer: James Troup Version: 1.3.3-8 Provides: awk Pre-Depends: libc0.2 (>= 2.2.3-7) Description: a pattern scanning and text processing language Mawk is an interpreter for the AWK Programming Language. The AWK language is useful for manipulation of data files, text retrieval and processing, and for prototyping and experimenting with algorithms. Mawk is a new awk meaning it implements the AWK language as defined in Aho, Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms to the Posix 1003.2 (draft 11.3) definition of the AWK language which contains a few features not described in the AWK book, and mawk provides a small number of extensions. . Mawk is smaller and much faster than gawk. It has some compile-time limits such as NF = 32767 and sprintf buffer = 1020. Package: libreadline4 Status: install ok unpacked Priority: required Section: base Installed-Size: 260 Maintainer: Matthias Klose Source: readline4 Version: 4.2-5 Depends: libc0.2 (>= 2.2.3-7), libncurses5 (>= 5.2.20010310-1) Description: GNU readline and history libraries, run-time libraries. The GNU readline library aids in the consistency of user interface across discrete programs that need to provide a command line interface. . The GNU history library provides a consistent user interface for recalling lines of previously typed input. Package: libstdc++2.10 Status: install ok unpacked Priority: required Section: base Installed-Size: 408 Maintainer: Debian GCC maintainers Source: gcc-2.95 (2.95.4.ds4-0.010810) Version: 1:2.95.4-0.010810 Depends: libc0.2 (>= 2.2.3-7) Description: The GNU stdc++ library NOTE: This is not a final release, but taken from the CVS gcc-2_95-branch (dated 20010522). . This package contains an additional runtime library for C++ programs built with the GNU compiler. Package: diff Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 288 Maintainer: Santiago Vila Version: 2.7-26 Pre-Depends: libc0.2 (>= 2.2.3-7) Description: File comparison utilities The diff package provides the diff, diff3, sdiff, and cmp programs. . `diff' shows differences between two files, or each corresponding file in two directories. `cmp' shows the offsets and line numbers where two files differ. `cmp' can also show all the characters that differ between the two files, side by side. `diff3' shows differences among three files. `sdiff' merges two files interactively. . The set of differences produced by `diff' can be used to distribute updates to text files (such as program source code) to other people. This method is especially useful when the differences are small compared to the complete files. Given `diff' output, the `patch' program can update, or "patch", a copy of the file. Package: bash Essential: yes Status: install ok unpacked Priority: required Section: base Installed-Size: 652 Maintainer: Matthias Klose Version: 2.05-10 Replaces: bash-doc (<= 2.05-1) Depends: base-files (>= 2.1.12) Pre-Depends: libc0.2 (>= 2.2.3-7), libncurses5 (>= 5.2.20010310-1), libreadline4 (>= 4.2-2) Conffiles: /etc/bash.bashrc newconffile /etc/skel/.bash_profile newconffile /etc/skel/.bashrc newconffile Description: The GNU Bourne Again SHell Bash is an sh-compatible command language interpreter that executes commands read from the standard input or from a file. Bash also incorporates useful features from the Korn and C shells (ksh and csh). . Bash is ultimately intended to be a conformant implementation of the IEEE Posix Shell and Tools specification (IEEE Working Group 1003.2).