Hi,Debian 6.0.3_amd64 (squeeze net install disk) fails on Optiplex 980 with Raid0 and LVM.
grub-install fails on disk probe. grub-install version is (GRUB) 1.98+20100804-14+squeeze1 ------------------------------------------------------------------------result of command "/usr/sbin/grub-probe --device-map=/boot/grub/device.map -v /boot/grub" :
/usr/sbin/grub-probe: info: the size of hd0 is 488281250.
/usr/sbin/grub-probe: info: the size of hd0 is 488281250.
/usr/sbin/grub-probe: info: the size of hd0 is 488281250.
/usr/sbin/grub-probe: info: the size of hd0 is 488281250.
/usr/sbin/grub-probe: info: the size of hd0 is 488281250.
/usr/sbin/grub-probe: info: the size of hd1 is 488281250.
/usr/sbin/grub-probe: info: the size of hd1 is 488281250.
/usr/sbin/grub-probe: info: the size of hd0 is 488281250.
/usr/sbin/grub-probe: info: the size of hd0 is 488281250.
/usr/sbin/grub-probe: info: the size of hd0 is 488281250.
/usr/sbin/grub-probe: info: the size of hd0 is 488281250.
/usr/sbin/grub-probe: info: the size of hd0 is 488281250.
/usr/sbin/grub-probe: info: the size of hd1 is 488281250.
/usr/sbin/grub-probe: info: the size of hd1 is 488281250.
/usr/sbin/grub-probe: info: changing current directory to /dev.
/usr/sbin/grub-probe: info: changing current directory to ghisvain.
/usr/sbin/grub-probe: info: changing current directory to mapper.
/usr/sbin/grub-probe: info: opening ghisvain-root.
/usr/sbin/grub-probe: error: no such disk.
------------------------------------------------------------------------
hardware disk configuration is :
*-storage
description: RAID bus controller
product: 82801 SATA RAID Controller
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
logical name: scsi0
logical name: scsi1
logical name: scsi2
version: 05
width: 32 bits
clock: 66MHz
capabilities: storage msi pm bus_master cap_list emulated
configuration: driver=ahci latency=0
resources: irq:32 ioport:fe00(size=8) ioport:fe10(size=4)
ioport:fe20(size=8) ioport:fe30(size=4) ioport:fec0(size=32)
memory:ff870000-ff8707ff
*-disk:0
description: ATA Disk
product: SAMSUNG HD253GJ
physical id: 0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 1AJ1
serial: S26CJ9FZ129344
size: 232GiB (250GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=18000000
*-volume:0 UNCLAIMED
description: Linux filesystem partition
physical id: 1
bus info: scsi@0:0.0.0,1
serial: 3O3kgT-MOx6-MeK6-JdqO-liYk-LnUE-VYfzN4
size: 109MiB
capacity: 109MiB
capabilities: primary lvm2
*-volume:1 UNCLAIMED
description: Linux filesystem partition
physical id: 2
bus info: scsi@0:0.0.0,2
capacity: 1035MiB
capabilities: primary bootable
*-volume:2 UNCLAIMED
description: Linux LVM Physical Volume partition
physical id: 3
bus info: scsi@0:0.0.0,3
capacity: 464GiB
capabilities: primary multi
*-disk:1
description: ATA Disk
product: ST3250318AS
vendor: Seagate
physical id: 1
bus info: scsi@1:0.0.0
logical name: /dev/sdb
version: CC45
serial: 9VY604R0
size: 232GiB (250GB)
configuration: ansiversion=5
------------------------------------------------------------------------
md devices are :
md
md126
md126p1
md126p2
md126p3
md127
------------------------------------------------------------------------
fstab is :
# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/dev/mapper/ghisvain-root / ext4 errors=remount-ro
0 1
# /boot was on /dev/md126p2 during installationUUID=4fdf4ce7-124c-400e-aca7-74dd87af4210 /boot ext2 defaults 0 2
/dev/mapper/ghisvain-data /data ext3 defaults 0 2 /dev/mapper/ghisvain-home /home ext3 defaults 0 2 /dev/mapper/ghisvain-opt /opt ext4 defaults 0 2 /dev/mapper/ghisvain-tmp /tmp ext2 defaults 0 2 /dev/mapper/ghisvain-usr /usr ext4 defaults 0 2 /dev/mapper/ghisvain-var /var ext4 defaults 0 2 /dev/mapper/ghisvain-swap none swap sw 0 0 /dev/scd0 /media/cdrom0 udf,iso9660 user,noauto 0 0 ------------------------------------------------------------------------Pearhaps duplicate of bug #34678 <http://savannah.gnu.org/bugs/?34678> ? not sure.
Is there a workaround to force correct detection and finish install ? Thanks for help. Luc.
<<attachment: luc_novales.vcf>>
_______________________________________________ Bug-grub mailing list [email protected] https://lists.gnu.org/mailman/listinfo/bug-grub
