Not sure how to do this, but config.log should contain system-dependent info.
Jeff
--
Jeff Hammond
Argonne Leadership Computing Facility
jhamm...@alcf.anl.gov / (630) 252-5381
http://www.linkedin.com/in/jeffhammond
=============================================
GNU Automake 1.11: tests/test-suite.log
=============================================
1 of 718 tests failed. (11 tests were not run).
.. contents:: :depth: 2
FAIL: acloca22.test (exit: 1)
=============================
/software/source/automake-1.11/tests:/software/ecce/ecce-v6.0/apps/scripts:/opt/kde3/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/cross/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:.:/usr/lib/qt3/bin:/software/nwchem/nwchem-6.0/bin/LINUX64:/software/mpich/mpich2-1.3a1-gnu-build/bin:/software/aces/aces2/bin:/software/aces3/current/bin:/software/cfour/bin:/software/dalton/dalton-2.0-cam/basis:/software/dalton/dalton-2.0-cam/bin:/software/psi/trunk-gnu-build//bin:/software/alps/bin:/opt/cuda/bin:/software/nvidia/cudasdk_2.3_linux/bin:/software/ecce/ecce-v5.0.1/apps/scripts:/software/vmd/vmd-1.8.6/bin:/software/molden/molden4.6:/software/macmolplt/bin:/software/gamess/gamess-current:/software/gamess/gamess_2007:/software/qchem/install/bin:/software/tau/x86_64/bin:/software/ftnchek/bin:/software/chapel/chapel-v1.2/bin/linux64:/software/orca/orca_i686_exe
=== Running test ./acloca22.test
++ pwd
/software/source/automake-1.11/tests/acloca22.dir
+ set -e
+ cat
+ cat
+ cat
+ cat
+ aclocal-1.11 -Werror -I .
+ automake-1.11 --foreign -Werror -Wall
+ autoconf
+ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
configure: creating ./config.status
config.status: creating Makefile
+ make
make: Nothing to be done for `all'.
+ grep GREPFOO Makefile
GREPFOO =
+ grep GREPBAR Makefile
+ sed s/FOO/BAR/
+ mv -f t configure.in
+ rm -f foo.m4
+ make
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /software/source/automake-1.11/tests/acloca22.dir/missing --run aclocal-1.11 -I .
cd . && /bin/sh /software/source/automake-1.11/tests/acloca22.dir/missing --run automake-1.11 --foreign
CDPATH="${ZSH_VERSION+.}:" && cd . && /bin/sh /software/source/automake-1.11/tests/acloca22.dir/missing --run autoconf
make: Nothing to be done for `all'.
+ grep GREPFOO Makefile
GREPFOO =
+ Exit 1
+ set +e
+ exit 1
+ exit 1
+ exit_status=1
+ cd /software/source/automake-1.11/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo ': exit 1'
: exit 1
+ exit 1
SKIP: depcomp5.test (exit: 77)
==============================
/software/source/automake-1.11/tests:/software/ecce/ecce-v6.0/apps/scripts:/opt/kde3/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/cross/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:.:/usr/lib/qt3/bin:/software/nwchem/nwchem-6.0/bin/LINUX64:/software/mpich/mpich2-1.3a1-gnu-build/bin:/software/aces/aces2/bin:/software/aces3/current/bin:/software/cfour/bin:/software/dalton/dalton-2.0-cam/basis:/software/dalton/dalton-2.0-cam/bin:/software/psi/trunk-gnu-build//bin:/software/alps/bin:/opt/cuda/bin:/software/nvidia/cudasdk_2.3_linux/bin:/software/ecce/ecce-v5.0.1/apps/scripts:/software/vmd/vmd-1.8.6/bin:/software/molden/molden4.6:/software/macmolplt/bin:/software/gamess/gamess-current:/software/gamess/gamess_2007:/software/qchem/install/bin:/software/tau/x86_64/bin:/software/ftnchek/bin:/software/chapel/chapel-v1.2/bin/linux64:/software/orca/orca_i686_exe
depcomp5: running icc -V -help
./defs: line 151: icc: command not found
SKIP: fort4.test (exit: 77)
===========================
/software/source/automake-1.11/tests:/software/ecce/ecce-v6.0/apps/scripts:/opt/kde3/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/cross/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:.:/usr/lib/qt3/bin:/software/nwchem/nwchem-6.0/bin/LINUX64:/software/mpich/mpich2-1.3a1-gnu-build/bin:/software/aces/aces2/bin:/software/aces3/current/bin:/software/cfour/bin:/software/dalton/dalton-2.0-cam/basis:/software/dalton/dalton-2.0-cam/bin:/software/psi/trunk-gnu-build//bin:/software/alps/bin:/opt/cuda/bin:/software/nvidia/cudasdk_2.3_linux/bin:/software/ecce/ecce-v5.0.1/apps/scripts:/software/vmd/vmd-1.8.6/bin:/software/molden/molden4.6:/software/macmolplt/bin:/software/gamess/gamess-current:/software/gamess/gamess_2007:/software/qchem/install/bin:/software/tau/x86_64/bin:/software/ftnchek/bin:/software/chapel/chapel-v1.2/bin/linux64:/software/orca/orca_i686_exe
fort4: running g77 --version
./defs: line 219: g77: command not found
SKIP: fort5.test (exit: 77)
===========================
/software/source/automake-1.11/tests:/software/ecce/ecce-v6.0/apps/scripts:/opt/kde3/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/cross/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:.:/usr/lib/qt3/bin:/software/nwchem/nwchem-6.0/bin/LINUX64:/software/mpich/mpich2-1.3a1-gnu-build/bin:/software/aces/aces2/bin:/software/aces3/current/bin:/software/cfour/bin:/software/dalton/dalton-2.0-cam/basis:/software/dalton/dalton-2.0-cam/bin:/software/psi/trunk-gnu-build//bin:/software/alps/bin:/opt/cuda/bin:/software/nvidia/cudasdk_2.3_linux/bin:/software/ecce/ecce-v5.0.1/apps/scripts:/software/vmd/vmd-1.8.6/bin:/software/molden/molden4.6:/software/macmolplt/bin:/software/gamess/gamess-current:/software/gamess/gamess_2007:/software/qchem/install/bin:/software/tau/x86_64/bin:/software/ftnchek/bin:/software/chapel/chapel-v1.2/bin/linux64:/software/orca/orca_i686_exe
fort5: running libtoolize --version
libtoolize (GNU libtool) 2.2.6
Written by Gary V. Vaughan <g...@gnu.org>, 2003
Copyright (C) 2008 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
fort5: running g77 --version
./defs: line 219: g77: command not found
SKIP: gcj4.test (exit: 77)
==========================
/software/source/automake-1.11/tests:/software/ecce/ecce-v6.0/apps/scripts:/opt/kde3/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/cross/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:.:/usr/lib/qt3/bin:/software/nwchem/nwchem-6.0/bin/LINUX64:/software/mpich/mpich2-1.3a1-gnu-build/bin:/software/aces/aces2/bin:/software/aces3/current/bin:/software/cfour/bin:/software/dalton/dalton-2.0-cam/basis:/software/dalton/dalton-2.0-cam/bin:/software/psi/trunk-gnu-build//bin:/software/alps/bin:/opt/cuda/bin:/software/nvidia/cudasdk_2.3_linux/bin:/software/ecce/ecce-v5.0.1/apps/scripts:/software/vmd/vmd-1.8.6/bin:/software/molden/molden4.6:/software/macmolplt/bin:/software/gamess/gamess-current:/software/gamess/gamess_2007:/software/qchem/install/bin:/software/tau/x86_64/bin:/software/ftnchek/bin:/software/chapel/chapel-v1.2/bin/linux64:/software/orca/orca_i686_exe
gcj4: running gcj --version
./defs: line 134: gcj: command not found
SKIP: parallel-tests2.test (exit: 77)
=====================================
/software/source/automake-1.11/tests:/software/ecce/ecce-v6.0/apps/scripts:/opt/kde3/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/cross/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:.:/usr/lib/qt3/bin:/software/nwchem/nwchem-6.0/bin/LINUX64:/software/mpich/mpich2-1.3a1-gnu-build/bin:/software/aces/aces2/bin:/software/aces3/current/bin:/software/cfour/bin:/software/dalton/dalton-2.0-cam/basis:/software/dalton/dalton-2.0-cam/bin:/software/psi/trunk-gnu-build//bin:/software/alps/bin:/opt/cuda/bin:/software/nvidia/cudasdk_2.3_linux/bin:/software/ecce/ecce-v5.0.1/apps/scripts:/software/vmd/vmd-1.8.6/bin:/software/molden/molden4.6:/software/macmolplt/bin:/software/gamess/gamess-current:/software/gamess/gamess_2007:/software/qchem/install/bin:/software/tau/x86_64/bin:/software/ftnchek/bin:/software/chapel/chapel-v1.2/bin/linux64:/software/orca/orca_i686_exe
parallel-tests2: running rst2html --version
./defs-p: line 194: rst2html: command not found
parallel-tests2: running rst2html.py --version
./defs-p: line 194: rst2html.py: command not found
SKIP: upc.test (exit: 77)
=========================
/software/source/automake-1.11/tests:/software/ecce/ecce-v6.0/apps/scripts:/opt/kde3/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/cross/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:.:/usr/lib/qt3/bin:/software/nwchem/nwchem-6.0/bin/LINUX64:/software/mpich/mpich2-1.3a1-gnu-build/bin:/software/aces/aces2/bin:/software/aces3/current/bin:/software/cfour/bin:/software/dalton/dalton-2.0-cam/basis:/software/dalton/dalton-2.0-cam/bin:/software/psi/trunk-gnu-build//bin:/software/alps/bin:/opt/cuda/bin:/software/nvidia/cudasdk_2.3_linux/bin:/software/ecce/ecce-v5.0.1/apps/scripts:/software/vmd/vmd-1.8.6/bin:/software/molden/molden4.6:/software/macmolplt/bin:/software/gamess/gamess-current:/software/gamess/gamess_2007:/software/qchem/install/bin:/software/tau/x86_64/bin:/software/ftnchek/bin:/software/chapel/chapel-v1.2/bin/linux64:/software/orca/orca_i686_exe
=== Running test ./upc.test
++ pwd
/software/source/automake-1.11/tests/upc.dir
+ set -e
+ cat
+ cat
+ cat
+ aclocal-1.11 -Werror
+ automake-1.11 --foreign -Werror -Wall
+ autoconf
+ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking dependency style of gcc... gcc3
checking for upcc... no
checking for upc... no
configure: error: no Unified Parallel C compiler was found
+ exit_status=77
+ cd /software/source/automake-1.11/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo ': exit 77'
: exit 77
+ exit 77
SKIP: upc3.test (exit: 77)
==========================
/software/source/automake-1.11/tests:/software/ecce/ecce-v6.0/apps/scripts:/opt/kde3/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/cross/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:.:/usr/lib/qt3/bin:/software/nwchem/nwchem-6.0/bin/LINUX64:/software/mpich/mpich2-1.3a1-gnu-build/bin:/software/aces/aces2/bin:/software/aces3/current/bin:/software/cfour/bin:/software/dalton/dalton-2.0-cam/basis:/software/dalton/dalton-2.0-cam/bin:/software/psi/trunk-gnu-build//bin:/software/alps/bin:/opt/cuda/bin:/software/nvidia/cudasdk_2.3_linux/bin:/software/ecce/ecce-v5.0.1/apps/scripts:/software/vmd/vmd-1.8.6/bin:/software/molden/molden4.6:/software/macmolplt/bin:/software/gamess/gamess-current:/software/gamess/gamess_2007:/software/qchem/install/bin:/software/tau/x86_64/bin:/software/ftnchek/bin:/software/chapel/chapel-v1.2/bin/linux64:/software/orca/orca_i686_exe
=== Running test ./upc3.test
++ pwd
/software/source/automake-1.11/tests/upc3.dir
+ set -e
+ cat
+ cat
+ cat
+ cat
+ cat
+ aclocal-1.11 -Werror
+ automake-1.11 --foreign -Werror -Wall
+ autoconf
+ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ISO C89... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking for upcc... no
checking for upc... no
configure: error: no Unified Parallel C compiler was found
+ exit_status=77
+ cd /software/source/automake-1.11/tests
+ case $exit_status,$keep_testdirs in
+ test 0 '!=' 0
+ echo ': exit 77'
: exit 77
+ exit 77
SKIP: vala2.test (exit: 77)
===========================
/software/source/automake-1.11/tests:/software/ecce/ecce-v6.0/apps/scripts:/opt/kde3/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/cross/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:.:/usr/lib/qt3/bin:/software/nwchem/nwchem-6.0/bin/LINUX64:/software/mpich/mpich2-1.3a1-gnu-build/bin:/software/aces/aces2/bin:/software/aces3/current/bin:/software/cfour/bin:/software/dalton/dalton-2.0-cam/basis:/software/dalton/dalton-2.0-cam/bin:/software/psi/trunk-gnu-build//bin:/software/alps/bin:/opt/cuda/bin:/software/nvidia/cudasdk_2.3_linux/bin:/software/ecce/ecce-v5.0.1/apps/scripts:/software/vmd/vmd-1.8.6/bin:/software/molden/molden4.6:/software/macmolplt/bin:/software/gamess/gamess-current:/software/gamess/gamess_2007:/software/qchem/install/bin:/software/tau/x86_64/bin:/software/ftnchek/bin:/software/chapel/chapel-v1.2/bin/linux64:/software/orca/orca_i686_exe
vala2: running libtool --version
ltmain.sh (GNU libtool) 2.2.6
Written by Gordon Matzigkeit <g...@gnu.ai.mit.edu>, 1996
Copyright (C) 2008 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
vala2: running libtoolize --version
libtoolize (GNU libtool) 2.2.6
Written by Gary V. Vaughan <g...@gnu.org>, 2003
Copyright (C) 2008 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
vala2: running pkg-config --version
0.23
vala2: running valac --version
./defs: line 219: valac: command not found
SKIP: vala3.test (exit: 77)
===========================
/software/source/automake-1.11/tests:/software/ecce/ecce-v6.0/apps/scripts:/opt/kde3/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/cross/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:.:/usr/lib/qt3/bin:/software/nwchem/nwchem-6.0/bin/LINUX64:/software/mpich/mpich2-1.3a1-gnu-build/bin:/software/aces/aces2/bin:/software/aces3/current/bin:/software/cfour/bin:/software/dalton/dalton-2.0-cam/basis:/software/dalton/dalton-2.0-cam/bin:/software/psi/trunk-gnu-build//bin:/software/alps/bin:/opt/cuda/bin:/software/nvidia/cudasdk_2.3_linux/bin:/software/ecce/ecce-v5.0.1/apps/scripts:/software/vmd/vmd-1.8.6/bin:/software/molden/molden4.6:/software/macmolplt/bin:/software/gamess/gamess-current:/software/gamess/gamess_2007:/software/qchem/install/bin:/software/tau/x86_64/bin:/software/ftnchek/bin:/software/chapel/chapel-v1.2/bin/linux64:/software/orca/orca_i686_exe
vala3: running libtool --version
ltmain.sh (GNU libtool) 2.2.6
Written by Gordon Matzigkeit <g...@gnu.ai.mit.edu>, 1996
Copyright (C) 2008 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
vala3: running libtoolize --version
libtoolize (GNU libtool) 2.2.6
Written by Gary V. Vaughan <g...@gnu.org>, 2003
Copyright (C) 2008 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
vala3: running pkg-config --version
0.23
vala3: running valac --version
./defs: line 219: valac: command not found
SKIP: vala5.test (exit: 77)
===========================
/software/source/automake-1.11/tests:/software/ecce/ecce-v6.0/apps/scripts:/opt/kde3/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/cross/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:.:/usr/lib/qt3/bin:/software/nwchem/nwchem-6.0/bin/LINUX64:/software/mpich/mpich2-1.3a1-gnu-build/bin:/software/aces/aces2/bin:/software/aces3/current/bin:/software/cfour/bin:/software/dalton/dalton-2.0-cam/basis:/software/dalton/dalton-2.0-cam/bin:/software/psi/trunk-gnu-build//bin:/software/alps/bin:/opt/cuda/bin:/software/nvidia/cudasdk_2.3_linux/bin:/software/ecce/ecce-v5.0.1/apps/scripts:/software/vmd/vmd-1.8.6/bin:/software/molden/molden4.6:/software/macmolplt/bin:/software/gamess/gamess-current:/software/gamess/gamess_2007:/software/qchem/install/bin:/software/tau/x86_64/bin:/software/ftnchek/bin:/software/chapel/chapel-v1.2/bin/linux64:/software/orca/orca_i686_exe
vala5: running libtool --version
ltmain.sh (GNU libtool) 2.2.6
Written by Gordon Matzigkeit <g...@gnu.ai.mit.edu>, 1996
Copyright (C) 2008 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
vala5: running libtoolize --version
libtoolize (GNU libtool) 2.2.6
Written by Gary V. Vaughan <g...@gnu.org>, 2003
Copyright (C) 2008 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
vala5: running pkg-config --version
0.23
vala5: running valac --version
./defs: line 219: valac: command not found
SKIP: xz.test (exit: 77)
========================
/software/source/automake-1.11/tests:/software/ecce/ecce-v6.0/apps/scripts:/opt/kde3/bin:/home/jeff/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/opt/cross/bin:/usr/lib/mit/bin:/usr/lib/mit/sbin:.:/usr/lib/qt3/bin:/software/nwchem/nwchem-6.0/bin/LINUX64:/software/mpich/mpich2-1.3a1-gnu-build/bin:/software/aces/aces2/bin:/software/aces3/current/bin:/software/cfour/bin:/software/dalton/dalton-2.0-cam/basis:/software/dalton/dalton-2.0-cam/bin:/software/psi/trunk-gnu-build//bin:/software/alps/bin:/opt/cuda/bin:/software/nvidia/cudasdk_2.3_linux/bin:/software/ecce/ecce-v5.0.1/apps/scripts:/software/vmd/vmd-1.8.6/bin:/software/molden/molden4.6:/software/macmolplt/bin:/software/gamess/gamess-current:/software/gamess/gamess_2007:/software/qchem/install/bin:/software/tau/x86_64/bin:/software/ftnchek/bin:/software/chapel/chapel-v1.2/bin/linux64:/software/orca/orca_i686_exe
xz: running xz --version
./defs: line 219: xz: command not found
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by GNU Automake configure 1.11, which was
generated by GNU Autoconf 2.63. Invocation command line was
$ ./configure --prefix=/usr
## --------- ##
## Platform. ##
## --------- ##
hostname = localhost
uname -m = x86_64
uname -r = 2.6.27.48-0.1-default
uname -s = Linux
uname -v = #1 SMP 2010-07-05 22:20:39 +0200
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /software/ecce/ecce-v6.0/apps/scripts
PATH: /opt/kde3/bin
PATH: /home/jeff/bin
PATH: /usr/local/bin
PATH: /usr/bin
PATH: /bin
PATH: /usr/bin/X11
PATH: /usr/X11R6/bin
PATH: /usr/games
PATH: /opt/cross/bin
PATH: /usr/lib/mit/bin
PATH: /usr/lib/mit/sbin
PATH: .
PATH: /usr/lib/qt3/bin
PATH: /software/nwchem/nwchem-6.0/bin/LINUX64
PATH: /software/mpich/mpich2-1.3a1-gnu-build/bin
PATH: /software/aces/aces2/bin
PATH: /software/aces3/current/bin
PATH: /software/cfour/bin
PATH: /software/dalton/dalton-2.0-cam/basis
PATH: /software/dalton/dalton-2.0-cam/bin
PATH: /software/psi/trunk-gnu-build//bin
PATH: /software/alps/bin
PATH: /opt/cuda/bin
PATH: /software/nvidia/cudasdk_2.3_linux/bin
PATH: /software/ecce/ecce-v5.0.1/apps/scripts
PATH: /software/vmd/vmd-1.8.6/bin
PATH: /software/molden/molden4.6
PATH: /software/macmolplt/bin
PATH: /software/gamess/gamess-current
PATH: /software/gamess/gamess_2007
PATH: /software/qchem/install/bin
PATH: /software/tau/x86_64/bin
PATH: /software/ftnchek/bin
PATH: /software/chapel/chapel-v1.2/bin/linux64
PATH: /software/orca/orca_i686_exe
## ----------- ##
## Core tests. ##
## ----------- ##
configure:1801: checking build system type
configure:1819: result: x86_64-unknown-linux-gnu
configure:1866: checking for a BSD-compatible install
configure:1934: result: /usr/bin/install -c
configure:1945: checking whether build environment is sane
configure:2005: result: yes
configure:2146: checking for a thread-safe mkdir -p
configure:2185: result: /bin/mkdir -p
configure:2198: checking for gawk
configure:2214: found /usr/bin/gawk
configure:2225: result: gawk
configure:2236: checking whether make sets $(MAKE)
configure:2258: result: yes
configure:2362: checking for perl
configure:2380: found /usr/bin/perl
configure:2392: result: /usr/bin/perl
configure:2418: checking whether /usr/bin/perl supports ithreads
configure:2441: result: yes
configure:2453: checking for tex
configure:2469: found /usr/bin/tex
configure:2480: result: tex
configure:2500: checking whether autoconf is installed
configure:2505: eval autoconf --version
autoconf (GNU Autoconf) 2.63
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv2+: GNU GPL version 2 or later
<http://gnu.org/licenses/old-licenses/gpl-2.0.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by David J. MacKenzie and Akim Demaille.
configure:2508: $? = 0
configure:2516: result: yes
configure:2526: checking whether autoconf works
configure:2533: cd conftest && eval autoconf -o /dev/null conftest.ac
configure:2536: $? = 0
configure:2545: result: yes
configure:2555: checking whether autoconf is recent enough
configure:2562: cd conftest && eval autoconf -o /dev/null conftest.ac
configure:2565: $? = 0
configure:2574: result: yes
configure:2583: checking whether ln works
configure:2603: result: yes
configure:2618: checking for grep that handles long lines and -e
configure:2678: result: /usr/bin/grep
configure:2683: checking for egrep
configure:2747: result: /usr/bin/grep -E
configure:2752: checking for fgrep
configure:2816: result: /usr/bin/grep -F
configure:2822: checking whether /bin/sh has working 'set -e' with exit trap
configure:2835: result: yes
configure:2994: creating ./config.status
## ---------------------- ##
## Running config.status. ##
## ---------------------- ##
This file was extended by GNU Automake config.status 1.11, which was
generated by GNU Autoconf 2.63. Invocation command line was
CONFIG_FILES =
CONFIG_HEADERS =
CONFIG_LINKS =
CONFIG_COMMANDS =
$ ./config.status
on localhost
config.status:693: creating Makefile
config.status:693: creating doc/Makefile
config.status:693: creating lib/Automake/Makefile
config.status:693: creating lib/Automake/tests/Makefile
config.status:693: creating lib/Makefile
config.status:693: creating lib/am/Makefile
config.status:693: creating m4/Makefile
config.status:693: creating tests/Makefile
config.status:693: creating tests/defs
config.status:693: creating tests/aclocal-1.11
config.status:693: creating tests/automake-1.11
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_path_EGREP='/usr/bin/grep -E'
ac_cv_path_FGREP='/usr/bin/grep -F'
ac_cv_path_GREP=/usr/bin/grep
ac_cv_path_PERL=/usr/bin/perl
ac_cv_path_install='/usr/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_TEX=tex
ac_cv_prog_make_make_set=yes
am_cv_autoconf_installed=yes
am_cv_autoconf_version=yes
am_cv_autoconf_works=yes
am_cv_prog_PERL_ithreads=yes
am_cv_prog_ln=ln
am_cv_sh_errexit_works=yes
## ----------------- ##
## Output variables. ##
## ----------------- ##
ACLOCAL='perllibdir="/software/source/automake-1.11/lib:./lib" "/software/source/automake-1.11/aclocal" --acdir=m4 -I m4'
AMTAR='${SHELL} /software/source/automake-1.11/lib/missing --run tar'
APIVERSION='1.11'
AUTOCONF='${SHELL} /software/source/automake-1.11/lib/missing --run autoconf'
AUTOHEADER='${SHELL} /software/source/automake-1.11/lib/missing --run autoheader'
AUTOMAKE='perllibdir="/software/source/automake-1.11/lib:./lib" "/software/source/automake-1.11/automake" --libdir=lib'
AWK='gawk'
CYGPATH_W='echo'
DEFS='-DPACKAGE_NAME=\"GNU\ Automake\" -DPACKAGE_TARNAME=\"automake\" -DPACKAGE_VERSION=\"1.11\" -DPACKAGE_STRING=\"GNU\ Automake\ 1.11\" -DPACKAGE_BUGREPORT=\"bug-autom...@gnu.org\" -DPACKAGE=\"automake\" -DVERSION=\"1.11\"'
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP='/usr/bin/grep -E'
FGREP='/usr/bin/grep -F'
GREP='/usr/bin/grep'
HELP2MAN='${SHELL} /software/source/automake-1.11/lib/missing --run help2man'
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
LIBOBJS=''
LIBS=''
LN='ln'
LTLIBOBJS=''
MAKEINFO='${SHELL} /software/source/automake-1.11/lib/missing --run makeinfo'
MKDIR_P='/bin/mkdir -p'
MODIFICATION_DELAY='2'
PACKAGE='automake'
PACKAGE_BUGREPORT='bug-automake@gnu.org'
PACKAGE_NAME='GNU Automake'
PACKAGE_STRING='GNU Automake 1.11'
PACKAGE_TARNAME='automake'
PACKAGE_VERSION='1.11'
PATH_SEPARATOR=':'
PERL='/usr/bin/perl'
PERL_THREADS='1'
SET_MAKE=''
SHELL='/bin/sh'
STRIP=''
TEX='tex'
VERSION='1.11'
am_AUTOCONF='autoconf'
am_AUTOHEADER='autoheader'
am__isrc=''
am__leading_dot='.'
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='${prefix}'
host_alias=''
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /software/source/automake-1.11/lib/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
mandir='${datarootdir}/man'
mkdir_p='/bin/mkdir -p'
oldincludedir='/usr/include'
pdfdir='${docdir}'
pkgvdatadir='${datadir}/automake-1.11'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sh_errexit_works='yes'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define PACKAGE_NAME "GNU Automake"
#define PACKAGE_TARNAME "automake"
#define PACKAGE_VERSION "1.11"
#define PACKAGE_STRING "GNU Automake 1.11"
#define PACKAGE_BUGREPORT "bug-automake@gnu.org"
#define PACKAGE "automake"
#define VERSION "1.11"
configure: exit 0
