On Fri, Oct 31, 2025 at 5:10 AM adriana <[email protected]> wrote: > > Signed-off-by: adriana <[email protected]> > --- > .../firmware/linux,smbios3-entrypoint.yaml | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/firmware/linux,smbios3-entrypoint.yaml > > diff --git > a/Documentation/devicetree/bindings/firmware/linux,smbios3-entrypoint.yaml > b/Documentation/devicetree/bindings/firmware/linux,smbios3-entrypoint.yaml > new file mode 100644 > index 000000000000..4d1521c685ff > --- /dev/null > +++ b/Documentation/devicetree/bindings/firmware/linux,smbios3-entrypoint.yaml > @@ -0,0 +1,25 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +# Copyright 2025 Arista Networks > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/firmware/linux,smbios3-entrypoint.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Memory location for SMBIOS entry point > + > +description: | > + This property is used in the /chosen node to pass the physical address > + of SMBIOS (System Management BIOS) or DMI (Desktop Management Interface) > + tables from firmware to the kernel. This is typically used on non-EFI. > + > +maintainers: > + - Adriana Nicolae <[email protected]> > + - Rob Herring <[email protected]> > + > +properties: > + linux,smbios3-entrypoint: > + $ref: /schemas/types.yaml#/definitions/uint64 > + description: > + The 64-bit physical address of the SMBIOSv3 entry point structure.
This needs to go in the chosen binding instead: https://github.com/devicetree-org/dt-schema/blob/main/dtschema/schemas/chosen.yaml _______________________________________________ boot-architecture mailing list -- [email protected] To unsubscribe send an email to [email protected]
