Hello K.
What does "disabled" setting mean?
This is my configuration
==================================
protocol bfd {
multihop {
min rx interval 300 ms;
min tx interval 300 ms;
multiplier 3;
};
}
protocol bgp as1 {
import all;
export all;
local ~ as ~;
neighbor ~ as ~;
enable route refresh off;
hold time 90;
bfd on;
}
protocol bgp as2 {
import all;
export all;
local ~ as ~;
neighbor ~ as ~;
enable route refresh off;
hold time 90;
bfd on;
}
==================================
Please check it.
Regards.
2020년 7월 20일 (월) 오후 7:48, Kees Meijs | Nefos <[email protected]>님이 작성:
> Hello Seunghwan,
>
> Haven't you got a "disabled" setting in de BIRD configuration file in
> the protocol portion?
>
> Regards,
> Kees
>
> On 20-07-2020 03:54, seunghwan hwang wrote:
> >
> > I've already tried capturing tcpdump.
> > BIRD's BFD neighbor was captured sending packets, but the packets sent
> > by BIRD were not captured.
> > In this state, BIRD's BFD packets were captured after restarting BFD
> > protocol.
> > The BFD packet was captured Only after restarting the BFD protocol .
> > Is there an issue with BFD Protocol?
> > Please Check it.
> >
>
>
