On 08/02/2017 01:50 PM, Faraz Hussain wrote:
Thanks Joe. Here is the output from the commands you suggested. We
have open mpi built from Intel mpi compiler. Is there some benchmark
code I can compile so that we are all comparing the same code?
[hussaif1@lustwzb4 test]$ ibv_devinfo
hca_id: mlx4_0
transport: InfiniBand (0)
fw_ver: 2.11.550
node_guid: f452:1403:0016:3b70
sys_image_guid: f452:1403:0016:3b73
vendor_id: 0x02c9
vendor_part_id: 4099
hw_ver: 0x0
board_id: DEL0A40000028
phys_port_cnt: 2
port: 1
state: PORT_ACTIVE (4)
Port 1 on the machine is up. This is the link level activity that the
subnet manager (OpenSM or a switch level version) enables.
For OpenMPI, my recollection is that they expect the IB ports to have
ethernet addresses as well (and will switch to RDMA after initialization).
What does
ifconfig -a
report?
--
Joe Landman
e: joe.land...@gmail.com
t: @hpcjoe
w: https://scalability.org
g: https://github.com/joelandman
l: https://www.linkedin.com/in/joelandman
_______________________________________________
Beowulf mailing list, Beowulf@beowulf.org sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit
http://www.beowulf.org/mailman/listinfo/beowulf
