Have you tried the -D LAN_2_0
commandline option [1] to the freeipmi tools? This enables the LAN 2.0 interface. Kind regards, René [1] https://www.gnu.org/software/freeipmi/manpages/man8/ipmi-config.8.html > Message: 1 > Date: Tue, 30 Aug 2016 14:38:27 -0400 > From: Michael Di Domenico <[email protected]> > To: Beowulf Mailing List <[email protected]> > Subject: [Beowulf] tyan ipmi > Message-ID: > <cabosp2n0aoczp0y0brrd+bvx-d7qh_9txeq_43rjjk8xqrp...@mail.gmail.com> > Content-Type: text/plain; charset=UTF-8 > > i'm trying to get SOL working on a Tyan motherboard using freeipmi. > but everything i run seems to give me "username invalid" when > connecting remotely. i can run corresponding ipmitool commands and > they work fine and even if i run bmc-info on the box locally it works. > it's only when i try to run bmc-info/ipmiconsole/etc from a remote box > that i get the error. > > i've checked the username/password its correct and i can connect to > the SOL interface using ipmitool so i'm pretty sure that everything i > have is setup correctly. > > there must be something odd about connecting over the network that > messes everything up. i tried several of the workarounds listed in > the manpage, but they didn't work > > any other thoughts? > > > ------------------------------ _______________________________________________ Beowulf mailing list, [email protected] sponsored by Penguin Computing To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
