Hi All, I am sure i am just doing something silly as i haven't had an issue in the past getting nodes discovered via the switch port lookup method.
Currently the newly booting node goes through the following steps Get IP Get the "xcat/xnba.kpxe" file Download the Genisis discovery environment and boot into it re-request IP get certificate initiate discovery This then loops never actually discovering. I have also attached the output of the messages file from the management node. Hardware is IBM dx360m4 node attached to Cisco WS-C3750G-48PS-S switch Any pointers on where to look for anything that might shed some light on this issue will be helpful. Also do i need to specifically get the MIBS file for the switch as i don't recall needing to to this in the past? Thanks in advance Nick
Sep 1 12:45:51 mgt dhcpd: DHCPDISCOVER from 40:f2:e9:04:79:e2 via em3 Sep 1 12:45:52 mgt dhcpd: DHCPOFFER on 10.10.200.1 to 40:f2:e9:04:79:e2 via em3 Sep 1 12:45:53 mgt dhcpd: DHCPREQUEST for 10.10.200.1 (10.10.100.79) from 40:f2:e9:04:79:e2 via em3 Sep 1 12:45:53 mgt dhcpd: DHCPACK on 10.10.200.1 to 40:f2:e9:04:79:e2 via em3 Sep 1 12:45:53 mgt in.tftpd[28421]: RRQ from 10.10.200.1 filename xcat/xnba.kpxe Sep 1 12:45:53 mgt in.tftpd[28421]: tftp: client does not accept options Sep 1 12:45:53 mgt in.tftpd[28422]: RRQ from 10.10.200.1 filename xcat/xnba.kpxe Sep 1 12:45:53 mgt dhcpd: DHCPDISCOVER from 40:f2:e9:04:79:e2 via em3 Sep 1 12:45:54 mgt dhcpd: DHCPOFFER on 10.10.200.2 to 40:f2:e9:04:79:e2 via em3 Sep 1 12:45:54 mgt dhcpd: DHCPREQUEST for 10.10.200.2 (10.10.100.79) from 40:f2:e9:04:79:e2 via em3 Sep 1 12:45:54 mgt dhcpd: DHCPACK on 10.10.200.2 to 40:f2:e9:04:79:e2 via em3 Sep 1 12:47:07 mgt dhcpd: DHCPDISCOVER from 40:f2:e9:04:79:e2 via em3 Sep 1 12:47:08 mgt dhcpd: DHCPOFFER on 10.10.200.3 to 40:f2:e9:04:79:e2 via em3 Sep 1 12:47:08 mgt dhcpd: DHCPREQUEST for 10.10.200.3 (10.10.100.79) from 40:f2:e9:04:79:e2 via em3 Sep 1 12:47:08 mgt dhcpd: DHCPACK on 10.10.200.3 to 40:f2:e9:04:79:e2 via em3 Sep 1 12:47:10 mgt xcat[33070]: xCAT: Allowing getcredentials x509cert Sep 1 12:47:46 mgt xcat[25330]: xcatd: Processing discovery request from 10.10.200.3 Sep 1 12:47:47 mgt xcat[39277]: Error communicating with ms-h25-mgtobm-1g-40: Unable to get MAC entries via either BRIDGE or Q-BRIDE MIB Sep 1 12:47:53 mgt xcat[25330]: xcatd: Processing discovery request from 10.10.200.3 Sep 1 12:47:59 mgt xcat[25330]: xcatd: Processing discovery request from 10.10.200.3 Sep 1 12:48:05 mgt xcat[25330]: xcatd: Processing discovery request from 10.10.200.3 Sep 1 12:48:11 mgt xcat[25330]: xcatd: Processing discovery request from 10.10.200.3 Sep 1 12:48:11 mgt xcat[39294]: Error communicating with ms-h25-mgtobm-1g-40: Unable to get MAC entries via either BRIDGE or Q-BRIDE MIB
_______________________________________________ Beowulf mailing list, Beowulf@beowulf.org sponsored by Penguin Computing To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
