I can't go into specifics. with HPL i usually can't top 80-85% of full power draw per cabinet. we have cabinets ranging from 17kw, 25kw, and 35kw. some of our user codes can push the machines to 90% of full load. this is shown on both amd 4-socket nodes and intel dual-socket with gpu's. we're running 208v three phase to the racks and 208v single phase to each server
On Mon, Jul 28, 2014 at 1:29 PM, Jeff White <jaw...@pitt.edu> wrote: > Power draw will vary greatly depending on many factors. Where I am at we > currently have 16 racks of HPC equipment (compute nodes, storage, network > gear, etc.) using about 140kVA but can use up to 160 kVA. A single rack > with 26 compute nodes each with 64 cores worth of AMD 6276 (Supermicro > boxes) is using about 18 kW across the PDUs, 3 phase at 240 volts, with most > of the nodes at 100% CPU usage. > > Jeff White - GNU+Linux Systems Administrator > University of Pittsburgh - CSSD > > > On 07/28/2014 10:51 AM, Prentice Bisbal wrote: >> >> Beowulfers, >> >> Are any of you monitoring the power draw on your clusters? If so, can >> any of you provide me with some statistics on your power draw under >> heavy load? Ideally, I'm looking for the power load for a worst-case >> scenario, such as running HPL, on a per-rack basis. If you can provide >> me with the power draw and a description of the hardware, that would be >> great. >> >> I have some numbers from a friend who lurks on this list, but the more >> data points I have, the better I can justify my power requirements for a >> new cluster purchase I'm working on. >> > _______________________________________________ > Beowulf mailing list, Beowulf@beowulf.org sponsored by Penguin Computing > To change your subscription (digest mode or unsubscribe) visit > http://www.beowulf.org/mailman/listinfo/beowulf _______________________________________________ Beowulf mailing list, Beowulf@beowulf.org sponsored by Penguin Computing To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf