Hi Don,
On 8/29/12 6:49 PM, Donald J Holmgren wrote:
> We use the AMD version of this motherboard ("TwinU"). The landed Mellanox
> MT25204 HCA has a 4x microGiGaCN connector at the back of motherboard. These
> are also often called CX4 connectors.
Excellent! Thanks so much for this info.
>
> Depending upon the switch you will connect the systems to, you need either
> microGiGaCN to microGiGaCN cables, or microGiGaCN to QSFP cables.
> Colfaxdirect.com lists many of each type.
The switch we are considering is QLogic SilverStorm 9024
(9024-FC24-ST1-DDR). So I suppose we need microGiGaCN to microGiGaCN
(CX4 to CX4) cable?
Thanks,
D.
>
> Supermicro.com has detailed specs and the manual for this motherboard.
>
> Don
>
>
>
> On Aug 29, 2012, at 5:05 AM, "Duke Nguyen" <[email protected]> wrote:
>
>> Hi folks,
>>
>> We plan to build a cluster using server built with SuperMicro X7DWT-INF
>> motherboards. Unfortunately google does not give us much information
>> about the type of connector that X7DWT-INF has.
>>
>> Anybody using this motherboard in their cluster? Please give us advice
>> about which connector the board has and what infiniband cable we should
>> acquire to fit in the rack-mount servers built with these boards.
>>
>> Thanks,
>>
>> D.
>> _______________________________________________
>> Beowulf mailing list, [email protected] sponsored by Penguin Computing
>> To change your subscription (digest mode or unsubscribe) visit
>> http://www.beowulf.org/mailman/listinfo/beowulf
_______________________________________________
Beowulf mailing list, [email protected] sponsored by Penguin Computing
To change your subscription (digest mode or unsubscribe) visit
http://www.beowulf.org/mailman/listinfo/beowulf
