If the hot-swappable drives are sold by the nameless vendor
pre-installed in the caddy, it is possible that the LocTite's primary
purpose was for tamper evidence, as in "if you pulled that screw you
must have been messing with the drives and we don't have honor the
warranty no more".
Perry E. Metzger wrote:
"David Mathog" <[EMAIL PROTECTED]> writes:
A vendor who shall remain nameless graced us with a hot swappable drive
caddy in which one of the three mounting screws used to fasten the drive
to the caddy had been treated with blue LocTite. This wasn't obvious
from external inspection, but the telltale blue glop was on the threads
when the screw finally let go and came out. It was beginning to look
like power tools were going to be needed to get it out, and the screw
head was pretty badly torn up after removal.
I believe a touch from a soldering iron will usually loosen LocTite,
but that might also damage a drive, so be careful.
This is the first time I have encountered a drive screw on a removable
drive which was, well, unremovable. Is this a trend or are we just
dealing with a sadistic assembler?
I've never seen it used with a drive, it is certainly not normal.
Perry
_______________________________________________
Beowulf mailing list, Beowulf@beowulf.org
To change your subscription (digest mode or unsubscribe) visit
http://www.beowulf.org/mailman/listinfo/beowulf
_______________________________________________
Beowulf mailing list, Beowulf@beowulf.org
To change your subscription (digest mode or unsubscribe) visit
http://www.beowulf.org/mailman/listinfo/beowulf
