stephen mulcahy <[EMAIL PROTECTED]> writes: > We can reset the WOL flags and re-enable it on individual nodes, but > unfortunately when the nodes are power-cycled, the WOL flag goes back > to its default (off) state. Given the typical use case of WOL, it > seems unfortunate that a power cycle resets it.
You might try the following: Take a machine with the flag off. Dump /dev/cmos. Change ONLY the flag in the BIOS, again dump /dev/cmos, and see if you can find where the flag resides. You can then build a hackish script to set the flag on machine boot. Perry -- Perry E. Metzger [EMAIL PROTECTED] _______________________________________________ Beowulf mailing list, Beowulf@beowulf.org To change your subscription (digest mode or unsubscribe) visit http://www.beowulf.org/mailman/listinfo/beowulf
