Tony Ladd wrote:
The Broadcom 5721 NIC comes with IPMI capability. We use Dell PE850's which
are equipped with dual onboard Broadcom 5721J NICS. One of the NICS has IPMI
built in. You set up the IPMI in the BIOS-IP address, username, password-and
then you can access over the same CAT5 cable. The regular ethernet and the
IPMI have separate MAC addresses even though they share the same physical
hardware. We use DHCP to set up all the network interfaces including IPMI. I
have found it very useful for checking hardware error logs and rebooting
crashed boxes remotely. Its worth noting that Dell rack servers come with
IPMI, rails and cable management arms-all extras with Sun.
I agree with you, I also own this boxes, it works like a charm.
It also works on all my DELL systems like the 1425.
I've also setup a floppy that configure the bios + the ipmi card. When I
prepare a cluster, I boot the node on this floppy and everything is set.
For example, it sets the serial over ipmi. This features works well, I
can follow what my box is doing, even more nicer I can enter the bios ;)
I love it.
_______________________________________________
Beowulf mailing list, [email protected]
To change your subscription (digest mode or unsubscribe) visit
http://www.beowulf.org/mailman/listinfo/beowulf
