Hi Xiuli, No problem, We have ordered 6 of them and can test when needed.
Cheers, Jerome On Thu, 31 Mar 2016 08:37:14 +0000 "Pan, Xiuli" <[email protected]> wrote: > Hi Jerome, > > From the device id you give we found that we have not support that device > yet. I will write a patch about it. Since I have not get a same device on > hand could you have a try once the patch is already and give us some feedback > then? > > Thanks > Xiuli > > -----Original Message----- > From: Beignet [mailto:[email protected]] On Behalf Of > Jérôme Kieffer > Sent: Wednesday, March 30, 2016 12:56 AM > To: [email protected] > Subject: [Beignet] Fw: Skylake support ... > > > > On Fri, 25 Mar 2016 02:26:32 +0000 > "Pan, Xiuli" <[email protected]> wrote: > > > Hi Jerome, > > > > Could you give us the device id of your new "Xeon v5"? As well as the linux > > kernel version and libdrm version? > > The beignet do support to skylake server gt4, you can check the id in > > src/cl_device_data.h. I have recently build an environment on a skylake > > server, and the biggest problem is that kernel and libdrm does not support > > the device. You can get a guide to get them on > > https://01.org/linuxgraphics/documentation/build-guide-0 > > Hi Xiuli, > > The processor is: > Intel(R) Xeon(R) CPU E3-1245 v5 @ 3.50GHz > > The kernel is: > Linux linazimov 4.3.0-0.bpo.1-amd64 #1 SMP Debian 4.3.3-7~bpo8+1 > (2016-01-19) x86_64 GNU/Linux > > The libdrm version is: > 2.4.67-1~bpo8+1 > > The VGA controler is seen on the PCIe bus as: > 00:02.0 VGA compatible controller: Intel Corporation Device 191d (rev 06) > (prog-if 00 [VGA controller]) > Subsystem: Dell Device 06b7 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- > <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 127 > Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=16M] > Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M] > Region 4: I/O ports at f000 [size=64] > Expansion ROM at <unassigned> [disabled] > Capabilities: <access denied> > Kernel driver in use: i915 > > > Actually, the video device which is supposed to be a P530 (hence supported) > but the id 191d is not referenced in the src/cl_device_data.h > > I tryed to declare it, recompiled but it is apparently not enough: there are > huge stack-traces in the dmesg ... > > Thanks for the hint. > Anyway it is likely the 190d, 191d, 192d and 193d devices are missing from > this header file. > > Cheers, > > Jerome > > _______________________________________________ > Beignet mailing list > [email protected] > https://lists.freedesktop.org/mailman/listinfo/beignet > _______________________________________________ > Beignet mailing list > [email protected] > https://lists.freedesktop.org/mailman/listinfo/beignet _______________________________________________ Beignet mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/beignet
