Hi ,
I get dmake from here:
http://cpan.perl.org/authors/id/GSAR/dmake-4.1pl1-win32.zip
I didn't modify anything, set up and so on, I only copied the file and added
the folder to path variable.
Here a snippet of makefile (attached the whole file):
-----------
# --- MakeMaker pm_to_blib section:
pm_to_blib: $(TO_INST_PM)
@$(PERL) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" \
"-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" -MExtUtils::Install \
-e "pm_to_blib(qw[ <<pmfiles.dat ],'$(INST_LIB)\auto','$(PM_FILTER)')"
$(PM_TO_BLIB) # this is the line in question
<<
@$(TOUCH) $@
# --- MakeMaker selfdocument section:
# --- MakeMaker postamble section:
dist : ppd
--------------
Till now I have installed the module by myself coping the files in the right
folder, but for these modules some .ix file must be created and I'm not able to
do it. For this reason I'm trying to install modules with dmake procedure.
Thanks a lot
Marco Centemeri
---------------------------------------------------------------------
[EMAIL PROTECTED] wrote:
>
> Hi Marco,
>
> 1) which dmake are you using, where did you get it?
>
> 2) can you post a snippet of your makefile (around the
> offending line?
>
> Will try to reproduce your problem here...
>
> Aloha => Beau.
>
> -----Original Message-----
> From: Marco Centemeri [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, December 03, 2002 9:38 PM
> To: [EMAIL PROTECTED]
> Subject: Installing modules
>
> Hello All,
>
> I'm trying to install on win2000 the following modules:
>
> IO::Stringy
> MailTools
>
> The command 'perl makefile.pl' works but then when I run dmake
> I always get the following error:
>
> 'Expecting macro or rule defn, found neither'
>
> See below snippet of command lines ->
>
> ***
>
> D:\temp\IO-stringy-2.108>perl.exe Makefile.PL
> Checking if your kit is complete...
> Looks good
> Writing Makefile for IO-stringy
>
> D:\temp\IO-stringy-2.108>dmake
> dmake.exe: makefile: line 668: Error -- Expecting macro or rule defn,
> found
> neither
>
> ****
>
> Pls. Can somebody help me to overcome the problem?
>
> Thanks a lot
>
> Marco Centemeri
> --
> ************************************************************
> Eng. MARCO CENTEMERI
>
> Telecommunication and Peripherals/Automotive Groups
> Audio & Automotive Division
> Automotive Business Unit
> Bosch Product Engineer
>
> STMicroelectronics Srl Tel: +39.039.603.5784
> 20041 Agrate Brianza - Italy Fax: +39.039.603.6343
> Via C. Olivetti, 2 Mobile: +39.0348.8861577
> Building F11 [EMAIL PROTECTED]
> ************************************************************
>
> --
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
> --
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
--
************************************************************
Eng. MARCO CENTEMERI
Telecommunication and Peripherals/Automotive Groups
Audio & Automotive Division
Automotive Business Unit
Bosch Product Engineer
STMicroelectronics Srl Tel: +39.039.603.5784
20041 Agrate Brianza - Italy Fax: +39.039.603.6343
Via C. Olivetti, 2 Mobile: +39.0348.8861577
Building F11 [EMAIL PROTECTED]
************************************************************
# This Makefile is for the Mail extension to perl.
#
# It was generated automatically by MakeMaker version
# 5.45 (Revision: 1.222) from the contents of
# Makefile.PL. Don't edit this file, edit Makefile.PL instead.
#
# ANY CHANGES MADE HERE WILL BE LOST!
#
# MakeMaker ARGV: ()
#
# MakeMaker Parameters:
# ABSTRACT => q[Various Mail related modules]
# AUTHOR => q[Mark Overmeer <[EMAIL PROTECTED]>]
# DISTNAME => q[MailTools]
# NAME => q[Mail]
# VERSION => q[1.52]
# --- MakeMaker post_initialize section:
# --- MakeMaker const_config section:
# These definitions are from config.sh (via F:/Perl/lib/Config.pm)
# They may have been overridden via Makefile.PL or on the command line
AR = lib
CC = cl
CCCDLFLAGS =
CCDLFLAGS =
DLEXT = dll
DLSRC = dl_win32.xs
LD = link
LDDLFLAGS = -dll -nologo -nodefaultlib -release -libpath:"F:\Perl\lib\CORE"
-machine:x86
LDFLAGS = -nologo -nodefaultlib -release -libpath:"F:\Perl\lib\CORE" -machine:x86
LIBC = msvcrt.lib
LIB_EXT = .lib
OBJ_EXT = .obj
OSNAME = MSWin32
OSVERS = 4.0
RANLIB = rem
SO = dll
EXE_EXT = .exe
FULL_AR =
# --- MakeMaker constants section:
AR_STATIC_ARGS = cr
NAME = Mail
DISTNAME = MailTools
NAME_SYM = Mail
VERSION = 1.52
VERSION_SYM = 1_52
XS_VERSION = 1.52
INST_BIN = blib\bin
INST_EXE = blib\script
INST_LIB = blib\lib
INST_ARCHLIB = blib\arch
INST_SCRIPT = blib\script
PREFIX = F:\Perl
INSTALLDIRS = site
INSTALLPRIVLIB = $(PREFIX)\lib
INSTALLARCHLIB = $(PREFIX)\lib
INSTALLSITELIB = F:\Perl\site\lib
INSTALLSITEARCH = F:\Perl\site\lib
INSTALLBIN = $(PREFIX)\bin
INSTALLSCRIPT = $(PREFIX)\bin
PERL_LIB = F:\Perl\lib
PERL_ARCHLIB = F:\Perl\lib
SITELIBEXP = F:\Perl\site\lib
SITEARCHEXP = F:\Perl\site\lib
LIBPERL_A = libperl.lib
FIRST_MAKEFILE = Makefile
MAKE_APERL_FILE = Makefile.aperl
PERLMAINCC = $(CC)
PERL_INC = F:\Perl\lib\CORE
PERL = F:\Perl\bin\perl.exe
FULLPERL = F:\Perl\bin\perl.exe
VERSION_MACRO = VERSION
DEFINE_VERSION = -D$(VERSION_MACRO)=\"$(VERSION)\"
XS_VERSION_MACRO = XS_VERSION
XS_DEFINE_VERSION = -D$(XS_VERSION_MACRO)=\"$(XS_VERSION)\"
MAKEMAKER =
MM_VERSION = 5.45
# FULLEXT = Pathname for extension directory (eg Foo/Bar/Oracle).
# BASEEXT = Basename part of FULLEXT. May be just equal FULLEXT. (eg Oracle)
# ROOTEXT = Directory part of FULLEXT with leading slash (eg /DBD) !!! Deprecated
from MM 5.32 !!!
# PARENT_NAME = NAME without BASEEXT and no trailing :: (eg Foo::Bar)
# DLBASE = Basename part of dynamic library. May be just equal BASEEXT.
FULLEXT = Mail
BASEEXT = Mail
DLBASE = $(BASEEXT)
OBJECT =
LDFROM = $(OBJECT)
LINKTYPE = dynamic
# Handy lists of source code files:
XS_FILES=
C_FILES =
O_FILES =
H_FILES =
HTMLLIBPODS =
HTMLSCRIPTPODS =
MAN1PODS =
MAN3PODS =
HTMLEXT = html
INST_MAN1DIR =
INSTALLMAN1DIR =
MAN1EXT = 1
INST_MAN3DIR =
INSTALLMAN3DIR =
MAN3EXT = 3
# work around a famous dec-osf make(1) feature(?):
makemakerdflt: all
..SUFFIXES: .xs .c .C .cpp .cxx .cc $(OBJ_EXT)
# Nick wanted to get rid of .PRECIOUS. I don't remember why. I seem to recall, that
# some make implementations will delete the Makefile when we rebuild it. Because
# we call false(1) when we rebuild it. So make(1) is not completely wrong when it
# does so. Our milage may vary.
# .PRECIOUS: Makefile # seems to be not necessary anymore
..PHONY: all config static dynamic test linkext manifest
# Where is the Config information that we are using/depend on
CONFIGDEP = $(PERL_ARCHLIB)\Config.pm $(PERL_INC)\config.h
# Where to put things:
INST_LIBDIR = $(INST_LIB)
INST_ARCHLIBDIR = $(INST_ARCHLIB)
INST_AUTODIR = $(INST_LIB)\auto\$(FULLEXT)
INST_ARCHAUTODIR = $(INST_ARCHLIB)\auto\$(FULLEXT)
INST_STATIC =
INST_DYNAMIC =
INST_BOOT =
EXPORT_LIST = Mail.def
PERL_ARCHIVE = $(PERL_INC)\perl56.lib
TO_INST_PM = Mail/Address.pm \
Mail/Cap.pm \
Mail/Field.pm \
Mail/Field/AddrList.pm \
Mail/Field/Date.pm \
Mail/Filter.pm \
Mail/Header.pm \
Mail/Internet.pm \
Mail/Mailer.pm \
Mail/Mailer/qmail.pm \
Mail/Mailer/rfc822.pm \
Mail/Mailer/sendmail.pm \
Mail/Mailer/smtp.pm \
Mail/Mailer/test.pm \
Mail/Send.pm \
Mail/Util.pm
PM_TO_BLIB = Mail/Field/AddrList.pm \
$(INST_LIBDIR)\Mail\Field\AddrList.pm \
Mail/Mailer/rfc822.pm \
$(INST_LIBDIR)\Mail\Mailer\rfc822.pm \
Mail/Util.pm \
$(INST_LIBDIR)\Mail\Util.pm \
Mail/Mailer/smtp.pm \
$(INST_LIBDIR)\Mail\Mailer\smtp.pm \
Mail/Mailer/sendmail.pm \
$(INST_LIBDIR)\Mail\Mailer\sendmail.pm \
Mail/Mailer/test.pm \
$(INST_LIBDIR)\Mail\Mailer\test.pm \
Mail/Field.pm \
$(INST_LIBDIR)\Mail\Field.pm \
Mail/Mailer.pm \
$(INST_LIBDIR)\Mail\Mailer.pm \
Mail/Address.pm \
$(INST_LIBDIR)\Mail\Address.pm \
Mail/Filter.pm \
$(INST_LIBDIR)\Mail\Filter.pm \
Mail/Mailer/qmail.pm \
$(INST_LIBDIR)\Mail\Mailer\qmail.pm \
Mail/Send.pm \
$(INST_LIBDIR)\Mail\Send.pm \
Mail/Header.pm \
$(INST_LIBDIR)\Mail\Header.pm \
Mail/Field/Date.pm \
$(INST_LIBDIR)\Mail\Field\Date.pm \
Mail/Internet.pm \
$(INST_LIBDIR)\Mail\Internet.pm \
Mail/Cap.pm \
$(INST_LIBDIR)\Mail\Cap.pm
# --- MakeMaker tool_autosplit section:
# Usage: $(AUTOSPLITFILE) FileToSplit AutoDirToSplitInto
AUTOSPLITFILE = $(PERL) "-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" -MAutoSplit -e
"autosplit($$ARGV[0], $$ARGV[1], 0, 1, 1);"
# --- MakeMaker tool_xsubpp section:
# --- MakeMaker tools_other section:
SHELL = cmd /x /c
CHMOD = $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e chmod
CP = $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e cp
LD = link
MV = $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e mv
NOOP = rem
RM_F = $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e rm_f
RM_RF = $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e rm_rf
TEST_F = $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e test_f
TOUCH = $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e touch
UMASK_NULL = umask 0
DEV_NULL = > NUL
# The following is a portable way to say mkdir -p
# To see which directories are created, change the if 0 to if 1
MKPATH = $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e mkpath
# This helps us to minimize the effect of the .exists files A yet
# better solution would be to have a stable file in the perl
# distribution with a timestamp of zero. But this solution doesn't
# need any changes to the core distribution and works with older perls
EQUALIZE_TIMESTAMP = $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e
eqtime
# Here we warn users that an old packlist file was found somewhere,
# and that they should call some uninstall routine
WARN_IF_OLD_PACKLIST = $(PERL) -lwe "exit unless -f $$ARGV[0];" \
-e "print 'WARNING: I have found an old package in';" \
-e "print ' ', $$ARGV[0], '.';" \
-e "print 'Please make sure the two installations are not conflicting';"
UNINST=0
VERBINST=1
MOD_INSTALL = $(PERL) -I$(INST_LIB) -I$(PERL_LIB) -MExtUtils::Install \
-e "install({ @ARGV },'$(VERBINST)',0,'$(UNINST)');"
DOC_INSTALL = $(PERL) -e "$$\=\"\n\n\";" \
-e "print '=head2 ', scalar(localtime), ': C<', shift, '>', ' L<', $$arg=shift, '|',
$$arg, '>';" \
-e "print '=over 4';" \
-e "while (defined($$key = shift) and defined($$val = shift)) { print '=item *';print
'C<', \"$$key: $$val\", '>'; }" \
-e "print '=back';"
UNINSTALL = $(PERL) -MExtUtils::Install \
-e "uninstall($$ARGV[0],1,1); print \"\nUninstall is deprecated. Please check the";" \
-e "print \" packlist above carefully.\n There may be errors. Remove the\";" \
-e "print \" appropriate files manually.\n Sorry for the inconveniences.\n\""
# --- MakeMaker dist section:
DISTVNAME = $(DISTNAME)-$(VERSION)
TAR = tar
TARFLAGS = cvf
ZIP = zip
ZIPFLAGS = -r
COMPRESS = gzip --best
SUFFIX = .gz
SHAR = shar
PREOP = @$(NOOP)
POSTOP = @$(NOOP)
TO_UNIX = @$(NOOP)
CI = ci -u
RCS_LABEL = rcs -Nv$(VERSION_SYM): -q
DIST_CP = best
DIST_DEFAULT = tardist
# --- MakeMaker macro section:
# --- MakeMaker depend section:
# --- MakeMaker cflags section:
# --- MakeMaker const_loadlibs section:
# --- MakeMaker const_cccmd section:
# --- MakeMaker post_constants section:
# --- MakeMaker pasthru section:
PASTHRU = -nologo
# --- MakeMaker c_o section:
# --- MakeMaker xs_c section:
# --- MakeMaker xs_o section:
# --- MakeMaker top_targets section:
#all :: config $(INST_PM) subdirs linkext manifypods
all :: pure_all htmlifypods manifypods
@$(NOOP)
pure_all :: config pm_to_blib subdirs linkext
@$(NOOP)
subdirs :: $(MYEXTLIB)
@$(NOOP)
config :: Makefile $(INST_LIBDIR)\.exists
@$(NOOP)
config :: $(INST_ARCHAUTODIR)\.exists
@$(NOOP)
config :: $(INST_AUTODIR)\.exists
@$(NOOP)
$(INST_AUTODIR)\.exists :: F:\Perl\lib\CORE\perl.h
@$(MKPATH) $(INST_AUTODIR)
@$(EQUALIZE_TIMESTAMP) F:\Perl\lib\CORE\perl.h $(INST_AUTODIR)\.exists
-@$(CHMOD) $(PERM_RWX) $(INST_AUTODIR)
$(INST_LIBDIR)\.exists :: F:\Perl\lib\CORE\perl.h
@$(MKPATH) $(INST_LIBDIR)
@$(EQUALIZE_TIMESTAMP) F:\Perl\lib\CORE\perl.h $(INST_LIBDIR)\.exists
-@$(CHMOD) $(PERM_RWX) $(INST_LIBDIR)
$(INST_ARCHAUTODIR)\.exists :: F:\Perl\lib\CORE\perl.h
@$(MKPATH) $(INST_ARCHAUTODIR)
@$(EQUALIZE_TIMESTAMP) F:\Perl\lib\CORE\perl.h $(INST_ARCHAUTODIR)\.exists
-@$(CHMOD) $(PERM_RWX) $(INST_ARCHAUTODIR)
help:
perldoc ExtUtils::MakeMaker
Version_check:
@$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) \
-MExtUtils::MakeMaker=Version_check \
-e "Version_check('$(MM_VERSION)')"
# --- MakeMaker linkext section:
linkext :: $(LINKTYPE)
@$(NOOP)
# --- MakeMaker dlsyms section:
Mail.def: Makefile.PL
$(PERL) "-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" -MExtUtils::Mksymlists \
-e "Mksymlists('NAME' => 'Mail', 'DLBASE' => '$(BASEEXT)', 'DL_FUNCS' => { },
'FUNCLIST' => [], 'IMPORTS' => { }, 'DL_VARS' => []);"
# --- MakeMaker dynamic section:
## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make dynamic"
#dynamic :: Makefile $(INST_DYNAMIC) $(INST_BOOT) $(INST_PM)
dynamic :: Makefile $(INST_DYNAMIC) $(INST_BOOT)
@$(NOOP)
# --- MakeMaker dynamic_bs section:
BOOTSTRAP =
# --- MakeMaker dynamic_lib section:
# --- MakeMaker static section:
## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make static"
#static :: Makefile $(INST_STATIC) $(INST_PM)
static :: Makefile $(INST_STATIC)
@$(NOOP)
# --- MakeMaker static_lib section:
# --- MakeMaker htmlifypods section:
htmlifypods : pure_all
@$(NOOP)
# --- MakeMaker manifypods section:
manifypods :
@$(NOOP)
# --- MakeMaker processPL section:
# --- MakeMaker installbin section:
# --- MakeMaker subdirs section:
# none
# --- MakeMaker clean section:
# Delete temporary files but do not touch installed files. We don't delete
# the Makefile here so a later make realclean still has a makefile to use.
clean ::
-$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e rm_rf ./blib
$(MAKE_APERL_FILE) $(INST_ARCHAUTODIR)/extralibs.all perlmain.c mon.out core
core.*perl.*.? *perl.core so_locations pm_to_blib *$(OBJ_EXT) *$(LIB_EXT) perl.exe
$(BOOTSTRAP) $(BASEEXT).bso $(BASEEXT).def $(BASEEXT).exp
-$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e mv Makefile
Makefile.old $(DEV_NULL)
# --- MakeMaker realclean section:
# Delete temporary files (via clean) and also delete installed files
realclean purge :: clean
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e rm_rf
$(INST_AUTODIR) $(INST_ARCHAUTODIR)
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e rm_f
$(INST_LIBDIR)\Mail\Field\AddrList.pm $(INST_LIBDIR)\Mail\Mailer\rfc822.pm
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e rm_f
$(INST_LIBDIR)\Mail\Util.pm $(INST_LIBDIR)\Mail\Mailer\smtp.pm
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e rm_f
$(INST_LIBDIR)\Mail\Mailer\sendmail.pm $(INST_LIBDIR)\Mail\Mailer\test.pm
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e rm_f
$(INST_LIBDIR)\Mail\Field.pm $(INST_LIBDIR)\Mail\Mailer.pm
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e rm_f
$(INST_LIBDIR)\Mail\Address.pm $(INST_LIBDIR)\Mail\Filter.pm
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e rm_f
$(INST_LIBDIR)\Mail\Mailer\qmail.pm $(INST_LIBDIR)\Mail\Send.pm
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e rm_f
$(INST_LIBDIR)\Mail\Header.pm $(INST_LIBDIR)\Mail\Field\Date.pm
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e rm_f
$(INST_LIBDIR)\Mail\Internet.pm $(INST_LIBDIR)\Mail\Cap.pm
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Command -e rm_rf Makefile
Makefile.old
# --- MakeMaker dist_basics section:
distclean :: realclean distcheck
distcheck :
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Manifest=fullcheck \
-e fullcheck
skipcheck :
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Manifest=skipcheck \
-e skipcheck
manifest :
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Manifest=mkmanifest \
-e mkmanifest
veryclean : realclean
$(RM_F) *~ *.orig */*~ */*.orig
# --- MakeMaker dist_core section:
dist : $(DIST_DEFAULT)
@$(PERL) -le "print \"Warning: Makefile possibly out of date with $$vf\" if " \
-e "-e ($$vf=\"$(VERSION_FROM)\") and -M $$vf < -M \"Makefile\";"
tardist : $(DISTVNAME).tar$(SUFFIX)
zipdist : $(DISTVNAME).zip
$(DISTVNAME).tar$(SUFFIX) : distdir
$(PREOP)
$(TO_UNIX)
$(TAR) $(TARFLAGS) $(DISTVNAME).tar $(DISTVNAME)
$(RM_RF) $(DISTVNAME)
$(COMPRESS) $(DISTVNAME).tar
$(POSTOP)
$(DISTVNAME).zip : distdir
$(PREOP)
$(ZIP) $(ZIPFLAGS) $(DISTVNAME).zip $(DISTVNAME)
$(RM_RF) $(DISTVNAME)
$(POSTOP)
uutardist : $(DISTVNAME).tar$(SUFFIX)
uuencode $(DISTVNAME).tar$(SUFFIX) \
$(DISTVNAME).tar$(SUFFIX) > \
$(DISTVNAME).tar$(SUFFIX)_uu
shdist : distdir
$(PREOP)
$(SHAR) $(DISTVNAME) > $(DISTVNAME).shar
$(RM_RF) $(DISTVNAME)
$(POSTOP)
# --- MakeMaker dist_dir section:
distdir :
$(RM_RF) $(DISTVNAME)
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Manifest=manicopy,maniread
\
-e "manicopy(maniread(),'$(DISTVNAME)', '$(DIST_CP)');"
# --- MakeMaker dist_test section:
disttest : distdir
cd $(DISTVNAME) && $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) Makefile.PL
cd $(DISTVNAME) && $(MAKE)
cd $(DISTVNAME) && $(MAKE) test
# --- MakeMaker dist_ci section:
ci :
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Manifest=maniread \
-e "@all = keys %{ maniread() };" \
-e "print(\"Executing $(CI) @all\n\"); system(\"$(CI) @all\");" \
-e "print(\"Executing $(RCS_LABEL) ...\n\"); system(\"$(RCS_LABEL)
@all\");"
# --- MakeMaker install section:
install :: all pure_install doc_install
install_perl :: all pure_perl_install doc_perl_install
install_site :: all pure_site_install doc_site_install
install_ :: install_site
@echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
pure_install :: pure_$(INSTALLDIRS)_install
doc_install :: doc_$(INSTALLDIRS)_install
@echo Appending installation info to $(INSTALLARCHLIB)/perllocal.pod
pure__install : pure_site_install
@echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
doc__install : doc_site_install
@echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
pure_perl_install ::
@$(MOD_INSTALL) \
read $(PERL_ARCHLIB)\auto\$(FULLEXT)\.packlist \
write $(INSTALLARCHLIB)\auto\$(FULLEXT)\.packlist \
$(INST_LIB) $(INSTALLPRIVLIB) \
$(INST_ARCHLIB) $(INSTALLARCHLIB) \
$(INST_BIN) $(INSTALLBIN) \
$(INST_SCRIPT) $(INSTALLSCRIPT) \
$(INST_HTMLLIBDIR) $(INSTALLHTMLPRIVLIBDIR) \
$(INST_HTMLSCRIPTDIR) $(INSTALLHTMLSCRIPTDIR) \
$(INST_MAN1DIR) $(INSTALLMAN1DIR) \
$(INST_MAN3DIR) $(INSTALLMAN3DIR)
@$(WARN_IF_OLD_PACKLIST) \
$(SITEARCHEXP)\auto\$(FULLEXT)
pure_site_install ::
@$(MOD_INSTALL) \
read $(SITEARCHEXP)\auto\$(FULLEXT)\.packlist \
write $(INSTALLSITEARCH)\auto\$(FULLEXT)\.packlist \
$(INST_LIB) $(INSTALLSITELIB) \
$(INST_ARCHLIB) $(INSTALLSITEARCH) \
$(INST_BIN) $(INSTALLBIN) \
$(INST_SCRIPT) $(INSTALLSCRIPT) \
$(INST_HTMLLIBDIR) $(INSTALLHTMLSITELIBDIR) \
$(INST_HTMLSCRIPTDIR) $(INSTALLHTMLSCRIPTDIR) \
$(INST_MAN1DIR) $(INSTALLMAN1DIR) \
$(INST_MAN3DIR) $(INSTALLMAN3DIR)
@$(WARN_IF_OLD_PACKLIST) \
$(PERL_ARCHLIB)\auto\$(FULLEXT)
doc_perl_install ::
-@$(MKPATH) $(INSTALLARCHLIB)
-@$(DOC_INSTALL) \
"Module" "$(NAME)" \
"installed into" "$(INSTALLPRIVLIB)" \
LINKTYPE "$(LINKTYPE)" \
VERSION "$(VERSION)" \
EXE_FILES "$(EXE_FILES)" \
>> $(INSTALLARCHLIB)\perllocal.pod
doc_site_install ::
-@$(MKPATH) $(INSTALLARCHLIB)
-@$(DOC_INSTALL) \
"Module" "$(NAME)" \
"installed into" "$(INSTALLSITELIB)" \
LINKTYPE "$(LINKTYPE)" \
VERSION "$(VERSION)" \
EXE_FILES "$(EXE_FILES)" \
>> $(INSTALLARCHLIB)\perllocal.pod
uninstall :: uninstall_from_$(INSTALLDIRS)dirs
uninstall_from_perldirs ::
@$(UNINSTALL) $(PERL_ARCHLIB)\auto\$(FULLEXT)\.packlist
uninstall_from_sitedirs ::
@$(UNINSTALL) $(SITEARCHEXP)\auto\$(FULLEXT)\.packlist
# --- MakeMaker force section:
# Phony target to force checking subdirectories.
FORCE:
@$(NOOP)
# --- MakeMaker perldepend section:
# --- MakeMaker makefile section:
# We take a very conservative approach here, but it\'s worth it.
# We move Makefile to Makefile.old here to avoid gnu make looping.
Makefile : Makefile.PL $(CONFIGDEP)
@echo "Makefile out-of-date with respect to $?"
@echo "Cleaning current config before rebuilding Makefile..."
-@$(RM_F) Makefile.old
-@$(MV) Makefile Makefile.old
-$(MAKE) -f Makefile.old clean $(DEV_NULL) || $(NOOP)
$(PERL) "-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" Makefile.PL
@echo "==> Your Makefile has been rebuilt. <=="
@echo "==> Please rerun the make command. <=="
false
# To change behavior to :: would be nice, but would break Tk b9.02
# so you find such a warning below the dist target.
#Makefile :: $(VERSION_FROM)
# @echo "Warning: Makefile possibly out of date with $(VERSION_FROM)"
# --- MakeMaker staticmake section:
# --- MakeMaker makeaperl section ---
MAP_TARGET = perl
FULLPERL = F:\Perl\bin\perl.exe
$(MAP_TARGET) :: static $(MAKE_APERL_FILE)
$(MAKE) -f $(MAKE_APERL_FILE) $@
$(MAKE_APERL_FILE) : $(FIRST_MAKEFILE)
@echo Writing \"$(MAKE_APERL_FILE)\" for this $(MAP_TARGET)
@$(PERL) -I$(INST_ARCHLIB) -I$(INST_LIB) -I$(PERL_ARCHLIB) -I$(PERL_LIB) \
Makefile.PL DIR= \
MAKEFILE=$(MAKE_APERL_FILE) LINKTYPE=static \
MAKEAPERL=1 NORECURS=1 CCCDLFLAGS=
# --- MakeMaker test section:
TEST_VERBOSE=0
TEST_TYPE=test_$(LINKTYPE)
TEST_FILE = test.pl
TEST_FILES = t\extract.t t\header.t t\internet.t t\mailcap.t t\mailer.t t\require.t
t\send.t
TESTDB_SW = -d
testdb :: testdb_$(LINKTYPE)
test :: $(TEST_TYPE)
test_dynamic :: pure_all
$(FULLPERL) -Mblib -I$(PERL_ARCHLIB) -I$(PERL_LIB) -e "use Test::Harness
qw(&runtests $$verbose); $$verbose=$(TEST_VERBOSE); runtests @ARGV;" $(TEST_FILES)
testdb_dynamic :: pure_all
$(FULLPERL) $(TESTDB_SW) -I$(INST_ARCHLIB) -I$(INST_LIB) -I$(PERL_ARCHLIB)
-I$(PERL_LIB) $(TEST_FILE)
test_ : test_dynamic
test_static :: test_dynamic
testdb_static :: testdb_dynamic
# --- MakeMaker ppd section:
# Creates a PPD (Perl Package Description) for a binary distribution.
ppd:
@$(PERL) -e "print qq{<SOFTPKG NAME=\"MailTools\" VERSION=\"1,52,0,0\">\n}.
qq{\t<TITLE>MailTools</TITLE>\n}. qq{\t<ABSTRACT>Various Mail related
modules</ABSTRACT>\n}. qq{\t<AUTHOR>Mark Overmeer
<mailtools\@overmeer.net></AUTHOR>\n}. qq{\t<IMPLEMENTATION>\n}. qq{\t\t<OS
NAME=\"$(OSNAME)\" />\n}. qq{\t\t<ARCHITECTURE NAME=\"MSWin32-x86-multi-thread\"
/>\n}. qq{\t\t<CODEBASE HREF=\"\" />\n}. qq{\t</IMPLEMENTATION>\n}. qq{</SOFTPKG>\n}"
> MailTools.ppd
# --- MakeMaker pm_to_blib section:
pm_to_blib: $(TO_INST_PM)
@$(PERL) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" \
"-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" -MExtUtils::Install \
-e "pm_to_blib(qw[ <<pmfiles.dat ],'$(INST_LIB)\auto','$(PM_FILTER)')"
$(PM_TO_BLIB)
<<
@$(TOUCH) $@
# --- MakeMaker selfdocument section:
# --- MakeMaker postamble section:
dist : ppd
# End.
--
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
