So it was the display USB that had the issue. Not the BBB. How do you like the touch response on that display? From: [email protected] [mailto:[email protected]] On Behalf Of Peter Lange Sent: June-03-21 12:28 PM To: [email protected] Subject: Re: [beagleboard] Re: BeagleBone Black (C) USB based touch not working Hi Robert, it's solved. Hardware, the USB connector. Was able to solder, now it works fine. Sometimes there was a second entry with lsusb. Then I found out, it's the connector, with a little pressure it worked. Then microscope, solder iron.... I spent 2 days and nights on that 😠But I learned a Lot Thanks to all Kasimir Robert Nelson <[email protected]> schrieb am Do., 3. Juni 2021, 15:37: > > The project requires the pru units, that works fine. > Touch is eating up my time. And I expect it makes no sense to order other > touch displays and the status is still the same. > USB based touch was expected as "best and simple" solution. I need SPI and > GPIO for surrounding hardware. That works fine. > HDMI is required to have the possibility to connect "any" monitor. There is > 1m distance between BBB and display. > RPI is not an option for me, because I need the PRU's.
lsusb ? i don't see it showing up in dmesg.. Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to a topic in the Google Groups "BeagleBoard" group. To unsubscribe from this topic, visit https://groups.google.com/d/topic/beagleboard/qynrtLRdkvU/unsubscribe. To unsubscribe from this group and all its topics, send an email to [email protected] <mailto:beagleboard%[email protected]> . To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYg%3DBonY6FnKgsxP%2B5SEdP1g376ZnAGYXnuFwCY9Tj2Tsw%40mail.gmail.com. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAHjW%3DhcB01%2B6gG1uZB%3DZt5jzcv-kHMOEW8htttCHd4XBdN%2BSUw%40mail.gmail.com <https://groups.google.com/d/msgid/beagleboard/CAHjW%3DhcB01%2B6gG1uZB%3DZt5jzcv-kHMOEW8htttCHd4XBdN%2BSUw%40mail.gmail.com?utm_medium=email&utm_source=footer> . -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/04e101d758b6%24c5218740%244f6495c0%24%40autoartisans.com.
