The BSP pdf you sent references another BSP user's guide can you find it?
Sent from Yahoo Mail on Android
On Thu, Mar 4, 2021 at 1:20 AM, Lucas SOLDA<[email protected]> wrote:
Yes I entered these commands in u-boot, I could have automated them but I
prefer to write them for the moment.
"In theory if you have a license BUT some RTOS companies dont supply BSP source
code unless you paid fees
So do you need to modify BSP"
Yes in theory I agree. I will need to modify the BSP because I want Isagraf so
I have to install the drivers (to make the beaglebone black a target I can load
through IsaGraf)
In fact I'm very lost with all of these thingsLe mercredi 3 mars 2021 à
19:50:58 UTC+1, lazarman a écrit :
These commands you entered are where? uboot?
--> fatload mmc 0 0x81000000 prebuilt-bsp-ti-beaglebone.ifs--> go 0x81000000
Why not automate these commands ?
<<<if I compile the BSP without modifying anything, I should get the prebuilt
image, right ?
In theory if you have a license BUT some RTOS companies dont supply BSP source
code unless you paid fees
So do you need to modify BSP>
On Wednesday, March 3, 2021, 09:03:22 AM CST, Lucas SOLDA
<[email protected]> wrote:
Mark,
I have a BeagleBone Black REV C.There was nothing on the SD before. I did not
touch to the EMC so I think there is nothing inside.My company has a QNX 6.5.0
SP1 licence and here is the list of the tools installed on my computer:
First, I formated my SD card in FAT32, I made it active by using diskpart and I
copied the MLO and then the u-boot files. I took them from here :
https://community.qnx.com/sf/wiki/do/viewPage/projects.bsp/wiki/TiAm335BeagleboneBootloader
modules# --> "Click here to download the MLO and u-boot binaries for the new
Beaglebone Black platform. "
After that, I downloaded the BSP files: QNX Neutrino 6.5.0 SP1# --> Download
Project Downloads --> bsp-nto650-ti-beaglebone-sp1-trunk-201209071340.zip(I
attach MLO, u-boot and BSP to this mail)After extracting, I copied the file
"prebuilt-bsp-ti-beaglebone.ifs" in the "image" folder to my sdcard and I could
succesfully launch QNX on my BBB by typing these commands :--> fatload mmc 0
0x81000000 prebuilt-bsp-ti-beaglebone.ifs--> go 0x81000000
That worked perfectly.
When I try to compile the image by myself it gets complicated.
if I compile the BSP without modifying anything, I should get the prebuilt
image, right ?The problem is that, when I do that, I have the message I gave in
the first post and it says that I compile with QNX 6.5.0 and not with QNX 6.5.0
SP1 (whereas it is installed).
"I'm guessing you have no support forum or no ones replying at QNX?" I don't
have support anymore and the only thing the told me is that I don't use QNX
6.5.0 SP1
I don't know what to do anymore and the QNX SDP is not on my computer so I
can't use it whenever I want
Le mercredi 3 mars 2021 à 15:03:47 UTC+1, lazarman a écrit :
Let's start with some history about what rev board you have , what was on SD
before and whats in the emc now and details about tools you installed to build
BSP and QNX and exactly the BSP file's you are compiling as well as your goals.
Are you trying to eventually modify the BSP source?I'm guessing you have no
support forum or no ones replying at QNX?I need a clear picture of what you did
exactly installing tools as in did you install multiple times etc etc
I'll look at the pdf you supplied and ponder whether it worthwhile and
practical to find my Beagleboard,Whites,blacks or even Pandaboard.power
supplies may be hard to match I've moved a lot. I guess a black would be easy
for me to find but may be in storage.
Also maybe they will let me reeducate myself as I'm not working on a
commercial product and give me access otherwise it's harder to help.
Hopefully I can get you on the right path
Mark
Sent from Yahoo Mail on Android
On Wed, Mar 3, 2021 at 1:15 AM, Lucas SOLDA<[email protected]> wrote: I
can send you the files if you don't have an account.
I use the MLO and u-boot files for beaglebone black from this link : "Click
here to download the MLO and u-boot binaries for the new Beaglebone Black
platform.".
The fact you pointed is troubling. I don't understand why the BSP is unchanged
between beagleboard and BBB.
"Perhaps if you disassemble the binary and look at the bone memory map and the
linker map and the u boot load address for QNX there's a mismatch do you have
access to BSP users guide? "
I will try to do that but I'm not an expert. I have access to the user guide
yes... Le mercredi 3 mars 2021 à 08:09:38 UTC+1, Lucas SOLDA a écrit :
@lazarman, in fact I'm not a student and I have a company account with a QNX
6.5.0 SP1 licence. I have also already registered to the" QNX Software
Development Platform 6.5.x (registration)" link that you gave me. The problem
is not the fact that I can't download and install the SDP but the fact that
when I build the image thanks to the BSP, I don't have the same result as the
prebuilt image
Le mercredi 3 mars 2021 à 00:24:34 UTC+1, lazarman a écrit :
Hi Robert I think Lucas is saying he's only trying to build the BSP not QNX.
I did this 10 years ago and I also had the latest BSP guides I tried getting
these and you need a customer login. It says it's free for education but again
BlackBerry bought this.
What's funny is this link below takes you to another page which says we support
these processors. It also says you should lose the latest version's
QNX SDP 7.0 BSP for Texas Instruments AM335x (Beaglebone Black)
https://blackberry.qnx.com/en/support/qnx-board-support-packages
Clicking on the above link next to the BSP you see another page saying
The QNX Software Center enables you to download and manage QNX Software
Development Platform version 7.x and related products. PDF documentation and
Licensing information relating to QNX SDP 7 and related products can also be
found here. IMPORTANT: SDP 7.x licenses are initially delivered within the
myQNX License Manager and MUST be assigned to users via the license manager in
order for them to access the product.
And no code just a login.
That BSP Lucas references is over 6 year's old.
Even 10 year's ago you needed a valid company domain and email address for QNX
I know GreenHills and maybe WindRiver as well wouldn't even reply to a free
email domain and definitely won't give you a 30 day level license key that the
license manager needed
Lucas is this for education 😉?? I know it's frustrating you might have to reach
out them about
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/0059314a-4779-4d14-90c4-72f26aa34996n%40googlegroups.com.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/3728398d-b6df-4a3d-a27c-110f6d3db85cn%40googlegroups.com.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/1306144895.345637.1614874599207%40mail.yahoo.com.
