Thank you for this. from Paul
On Wed, 20 Jan 2021, 17:19 'Raymond Willis' via BeagleBoard, < [email protected]> wrote: > When it reprograms the emmc, your user LEDs will begin flashing in a > cylon/night rider pattern. Wait until that stops. Then temove your card and > comment out that last line in uEnv.txt file. > > Also, > I have seen issues editing a uEnv.txt in Windows. When you save the file, > it converts the files format and UBOOT will not read it. Your boot up will > freeze. > And in ubuntu, uEnv.txt may show up as read only in the text editor. Open > a terminal in the boot directory and use $sudo vim uEnv.txt or $sudo nano > uEnv.txt to edit the file. > > Regards, > Raymond Willis Jr. > > On Wed, Jan 20, 2021 at 10:31 AM, Dennis Lee Bieber > <[email protected]> wrote: > On Tue, 19 Jan 2021 09:16:50 -0800 (PST), in > gmane.comp.hardware.beagleboard.user Paul Cotton > <[email protected]> wrote: > > >Thank you for the replies. Much appreciated. I have corrected my error > >and this is the screen. I do not see any eMMC Flasher command to change > >here? is it the eMMC cape disable I need to edit? Sorry an a true > >amateur! What next? > >[image: Screenshot 2021-01-19 171417.png] > > ONE: WHY did you use a screen image capture... It is a text console, > just select and paste the text! > > TWO: your image only seems to show the top of the file. uEnv.txt is > much longer than your screen. The line to convert to a flasher is at the > very end of the file. > > -=-=- > debian@beaglebone:~$ cat /boot/uEnv.txt > #Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0 > > uname_r=4.19.94-ti-r48 > #uuid= > #dtb= > > ###U-Boot Overlays### > ###Documentation: > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays > ###Master Enable > enable_uboot_overlays=1 > ### > ###Overide capes with eeprom > #uboot_overlay_addr0=/lib/firmware/<file0>.dtbo > #uboot_overlay_addr1=/lib/firmware/<file1>.dtbo > #uboot_overlay_addr2=/lib/firmware/<file2>.dtbo > #uboot_overlay_addr3=/lib/firmware/<file3>.dtbo > ### > ###Additional custom capes > #uboot_overlay_addr4=/lib/firmware/<file4>.dtbo > #uboot_overlay_addr5=/lib/firmware/<file5>.dtbo > #uboot_overlay_addr6=/lib/firmware/<file6>.dtbo > #uboot_overlay_addr7=/lib/firmware/<file7>.dtbo > ### > ###Custom Cape > #dtb_overlay=/lib/firmware/<file8>.dtbo > ### > ###Disable auto loading of virtual capes (emmc/video/wireless/adc) > #disable_uboot_overlay_emmc=1 > #disable_uboot_overlay_video=1 > #disable_uboot_overlay_audio=1 > #disable_uboot_overlay_wireless=1 > #disable_uboot_overlay_adc=1 > ### > ###PRUSS OPTIONS > ###pru_rproc (4.14.x-ti kernel) > #uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo > ###pru_rproc (4.19.x-ti kernel) > uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo > ###pru_uio (4.14.x-ti, 4.19.x-ti & mainline/bone kernel) > #uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo > ### > ###Cape Universal Enable > enable_uboot_cape_universal=1 > ### > ###Debug: disable uboot autoload of Cape > #disable_uboot_overlay_addr0=1 > #disable_uboot_overlay_addr1=1 > #disable_uboot_overlay_addr2=1 > #disable_uboot_overlay_addr3=1 > ### > ###U-Boot fdt tweaks... (60000 = 384KB) > #uboot_fdt_buffer=0x60000 > ###U-Boot Overlays### > > cmdline=coherent_pool=1M net.ifnames=0 lpj=1990656 > rng_core.default_quality=100 quiet > > #In the event of edid real failures, uncomment this next line: > #cmdline=coherent_pool=1M net.ifnames=0 lpj=1990656 > rng_core.default_quality=100 quiet video=HDMI-A-1:1024x768@60e > > ##enable Generic eMMC Flasher: > ##make sure, these tools are installed: dosfstools rsync > #cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh > > debian@beaglebone:~$ > > -=-=-=- > > > -- > Dennis L Bieber > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/7gmg0gtk0h14h5i36pinujrdvdvvbngogc%404ax.com > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/jpeFMaWCYj8/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/433793954.2411540.1611163164385%40mail.yahoo.com > <https://groups.google.com/d/msgid/beagleboard/433793954.2411540.1611163164385%40mail.yahoo.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAGHvi92OK1cUnP8gQFR%2BVSh7yhFhmZZO7RkOJ-PXmNrZc5yXPg%40mail.gmail.com.
