output of version.sh: git:/opt/scripts/:[b39ec679648a6be8f25f48bd1c9784c1fc5a0c46] eeprom:[A335BNLTGW1ASENSECAP1905] model:[TI_AM335x_BeagleBone_Green_Wireless] dogtag:[BeagleBoard.org Debian Buster IoT Image 2020-04-06] bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2019.04-00002-g07d5700e21]:[location: dd MBR] UBOOT: Booted Device-Tree:[am335x-bonegreen-wireless-uboot-univ.dts] UBOOT: Loaded Overlay:[AM335X-PRU-RPROC-4-19-TI-00A0] UBOOT: Loaded Overlay:[BB-ADC-00A0] UBOOT: Loaded Overlay:[BB-BBGW-WL1835-00A0] UBOOT: Loaded Overlay:[BB-BONE-eMMC1-01-00A0] kernel:[4.19.94-ti-r42] nodejs:[v10.15.2] /boot/uEnv.txt Settings: uboot_overlay_options:[enable_uboot_overlays=1] uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo] uboot_overlay_options:[enable_uboot_cape_universal=1] pkg check: to individually upgrade run: [sudo apt install --only-upgrade <pkg>] pkg:[bb-cape-overlays]:[4.14.20200403.0-0rcnee0~buster+20200403] pkg:[bb-wl18xx-firmware]:[1.20200322.0-0rcnee0~buster+20200322] pkg:[kmod]:[26-1] pkg:[librobotcontrol]:[1.0.4-git20190227.1-0rcnee0~buster+20190327] pkg:[firmware-ti-connectivity]:[20190717-2rcnee1~buster+20200305] groups:[debian : debian adm kmem dialout cdrom floppy audio dip video plugdev users systemd-journal bluetooth netdev i2c gpio pwm eqep remoteproc admin spi iio docker tisdk weston-launch xenomai cloud9ide] cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet] dmesg | grep remote [ 11.325862] remoteproc remoteproc0: 4a334000.pru is available [ 11.337638] remoteproc remoteproc1: 4a338000.pru is available dmesg | grep pru [ 11.325862] remoteproc remoteproc0: 4a334000.pru is available [ 11.326048] pru-rproc 4a334000.pru: PRU rproc node pru@4a334000 probed successfully [ 11.337638] remoteproc remoteproc1: 4a338000.pru is available [ 11.337829] pru-rproc 4a338000.pru: PRU rproc node pru@4a338000 probed successfully dmesg | grep pinctrl-single [ 0.917887] pinctrl-single 44e10800.pinmux: 142 pins, size 568 dmesg | grep gpio-of-helper [ 0.930374] gpio-of-helper ocp:cape-universal: ready lsusb Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub END
uEVnv.txt: #Docs: http://elinux.org/Beagleboard:U-boot_partitioning_layout_2.0 uname_r=4.19.94-ti-r42 #uuid= #dtb= ###U-Boot Overlays### ###Documentation: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#U-Boot_Overlays ###Master Enable enable_uboot_overlays=1 ### ###Overide capes with eeprom #uboot_overlay_addr0=/lib/firmware/<file0>.dtbo #uboot_overlay_addr1=/lib/firmware/<file1>.dtbo #uboot_overlay_addr2=/lib/firmware/<file2>.dtbo #uboot_overlay_addr3=/lib/firmware/<file3>.dtbo ### ###Additional custom capes #uboot_overlay_addr4=/lib/firmware/<file4>.dtbo #uboot_overlay_addr5=/lib/firmware/<file5>.dtbo #uboot_overlay_addr6=/lib/firmware/<file6>.dtbo #uboot_overlay_addr7=/lib/firmware/<file7>.dtbo ### ###Custom Cape #dtb_overlay=/lib/firmware/<file8>.dtbo ### ###Disable auto loading of virtual capes (emmc/video/wireless/adc) #disable_uboot_overlay_emmc=1 #disable_uboot_overlay_video=1 #disable_uboot_overlay_audio=1 #disable_uboot_overlay_wireless=1 #disable_uboot_overlay_adc=1 ### ###PRUSS OPTIONS ###pru_rproc (4.14.x-ti kernel) #uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-14-TI-00A0.dtbo ###pru_rproc (4.19.x-ti kernel) uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-19-TI-00A0.dtbo ###pru_uio (4.14.x-ti, 4.19.x-ti & mainline/bone kernel) #uboot_overlay_pru=/lib/firmware/AM335X-PRU-UIO-00A0.dtbo ### ###Cape Universal Enable enable_uboot_cape_universal=1 ### ###Debug: disable uboot autoload of Cape #disable_uboot_overlay_addr0=1 #disable_uboot_overlay_addr1=1 #disable_uboot_overlay_addr2=1 #disable_uboot_overlay_addr3=1 ### ###U-Boot fdt tweaks... (60000 = 384KB) #uboot_fdt_buffer=0x60000 ###U-Boot Overlays### cmdline=coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet #In the event of edid real failures, uncomment this next line: #cmdline=coherent_pool=1M net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet video=HDMI-A-1:1024x768@60e ##enable Generic eMMC Flasher: #cmdline=init=/opt/scripts/tools/eMMC/init-eMMC-flasher-v3.sh Looks like nothing is assigned to the dtb, I'll give assigning 'am335x-boneblack-emmc-overlay.dtb' in the uEnv.txt a go a see what it looks like, as I don't think the green-wirelees has a ethernet socket? On Tuesday, January 19, 2021 at 7:35:39 AM UTC+10 [email protected] wrote: > Ok > > Could you please run the version.sh script under > /opt/scripts/tools/version.sh > > Take a look at the /boot/uEnv.txt a line dtb= > If is commented -with a #dtb= or if there is dtb=anything > > > > Sent from my iPhone > > > Em 18 de jan. de 2021, à(s) 18:01, Yendor <[email protected]> escreveu: > > Hi, > > > Had to google device tree blob (DTB), so the short answer is I don't know. > But I found a command that may shed some light > > cat /proc/device-tree/model: > TI AM335x BeagleBone Green Wireless > > if you want to see the output of some commands just let me know, thanks > for the help. > > On Tuesday, January 19, 2021 at 6:18:11 AM UTC+10 [email protected] > wrote: > >> >> Hi >> >> What dtb you are using? >> There is any message regarding Ethernet on the dmesg? >> >> >> >> Em seg., 18 de jan. de 2021 às 16:48, Yendor <[email protected]> >> escreveu: >> >>> Thanks for the reply Chris, >>> It is been plug into a network with a DHCP server provide by a pfsense >>> firewall. >>> >>> I think my problem is that the standard image (AM3358 Debian 10.3 >>> 2020-04-06 4GB SD IoT) is not finding the ethernet adapter as I don't see >>> it in ifconfig, I only see the ethernet over usb connections. >>> >>> note this is a customs board by SeeedStudio: >>> [image: SCG_Back.jpg][image: SCG_Front.jpg] >>> On Monday, January 18, 2021 at 7:18:27 PM UTC+10 Chris Green wrote: >>> >>>> Yendor <[email protected]> wrote: >>>> > >>>> > Hi, >>>> > Recently I got a seeedStudio senseCap LoRa gateway to try out for a >>>> LoRa >>>> > project we have coming up. Upon requesting if we could get root >>>> access to >>>> > the OS we were told that it was not been provided at this time. So I >>>> went >>>> > to explore mode and found that we could connect to the console and it >>>> > Identified itself as a beaglebone green (but could not get access >>>> with >>>> > default passwords). >>>> > >>>> > So after reading some documents and the beagleboard.org website I >>>> worked >>>> > out I could boot from a uSD and get console and ssh access with the >>>> default >>>> > password. >>>> > >>>> > But it doesn’t look like it able to start the ethernet interface and >>>> was >>>> > wondering if anyone here can help debug to why it wont start/enable. >>>> > >>>> Rather basic question, but you never know, is the BBB/Cape connected >>>> to a network that has a DHCP server on it? >>>> >>>> -- >>>> Chris Green >>>> · >>>> >>>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/beagleboard/fa167a4a-0bcb-4111-996e-95d4a7ec349an%40googlegroups.com >>> >>> <https://groups.google.com/d/msgid/beagleboard/fa167a4a-0bcb-4111-996e-95d4a7ec349an%40googlegroups.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/bcbb6e9c-1e2a-4128-a0be-3914bae1634an%40googlegroups.com > > <https://groups.google.com/d/msgid/beagleboard/bcbb6e9c-1e2a-4128-a0be-3914bae1634an%40googlegroups.com?utm_medium=email&utm_source=footer> > . > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/e2956cc0-64e2-4d66-8baa-4b194bfc36cfn%40googlegroups.com.
