Thank you all. It fixed when I re-flash eMMC latest image download from https://debian.beagleboard.org/images/am57xx-eMMC-flasher-debian-10.3-iot-tidl-armhf-2020-04-06-6gb.img.xz <https://debian.beagleboard.org/images/am57xx-eMMC-flasher-debian-10.3-iot-tidl-armhf-2020-04-06-6gb.img.xz>.
Thanks, Seksit > On 23 Nov 2020, at 12:35 AM, jonnymo <[email protected]> wrote: > > For the WiFi side, did you set the dns and gateway for the WiFi connection? > You can do this from command line via: > # connmanctl config <service> --ipv4 manual <ip address> <netmask> <gateway> > # connmanctl config <service> --nameservers <dns-addr> > > The connman connections should be under the '/var/lib/connman' folder. You > could view your connection to see what is set there. > > You can check the routing on your BBAI as such: > debian@beaglebone:~$ ip r > default via 192.168.2.1 dev wlan0 > 4.4.4.4 via 192.168.2.1 dev wlan0 > 8.8.4.4 via 192.168.2.1 dev wlan0 > 8.8.8.8 via 192.168.2.1 dev wlan0 > 192.168.0.0/21 <http://192.168.0.0/21> dev wlan0 proto kernel scope link src > 192.168.2.200 > 192.168.2.1 dev wlan0 scope link > 192.168.6.0/24 <http://192.168.6.0/24> dev usb1 proto kernel scope link src > 192.168.6.2 linkdown > 192.168.7.0/24 <http://192.168.7.0/24> dev usb0 proto kernel scope link src > 192.168.7.2 linkdown > 192.168.8.0/24 <http://192.168.8.0/24> dev SoftAp0 proto kernel scope link > src 192.168.8.1 > > debian@beaglebone:~$ route > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use Iface > default 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 > 4.4.4.4 192.168.2.1 255.255.255.255 UGH 0 0 0 wlan0 > dns.google 192.168.2.1 255.255.255.255 UGH 0 0 0 wlan0 > dns.google 192.168.2.1 255.255.255.255 UGH 0 0 0 wlan0 > 192.168.0.0 0.0.0.0 255.255.248.0 U 0 0 0 wlan0 > 192.168.2.1 0.0.0.0 255.255.255.255 UH 0 0 0 wlan0 > 192.168.6.0 0.0.0.0 255.255.255.0 U 0 0 0 usb1 > 192.168.7.0 0.0.0.0 255.255.255.0 U 0 0 0 usb0 > 192.168.8.0 0.0.0.0 255.255.255.0 U 0 0 0 > SoftAp0 > > > Cheers, > > Jon > > On Sun, Nov 22, 2020 at 9:09 AM Seksit Yodpetch <[email protected] > <mailto:[email protected]>> wrote: > - I am using Beagle Bone AI > - Latest image of BeagleBone AI flash to eMMC (AM5729 Debian 10.3 2020-04-06 > 16GB eMMC IoT TIDL Flasher > <https://debian.beagleboard.org/images/am57xx-eMMC-flasher-debian-10.3-iot-tidl-armhf-2020-04-06-6gb.img.xz> > — > https://debian.beagleboard.org/images/am57xx-eMMC-flasher-debian-10.3-iot-tidl-armhf-2020-04-06-6gb.img.xz > > <https://debian.beagleboard.org/images/am57xx-eMMC-flasher-debian-10.3-iot-tidl-armhf-2020-04-06-6gb.img.xz> > ) > - Degian 10.3 2020-04-06 as follows > https://debian.beagleboard.org/images/am57xx-eMMC-flasher-debian-10.3-iot-tidl-armhf-2020-04-06-6gb.img.xz > > <https://debian.beagleboard.org/images/am57xx-eMMC-flasher-debian-10.3-iot-tidl-armhf-2020-04-06-6gb.img.xz> > > - FW upgrade by following instruction in > https://beagleboard.org/getting-started > <https://beagleboard.org/getting-started> and > https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Flashing_eMMC > <https://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Flashing_eMMC> > > Thanks > Seksit > >> On 22 Nov 2020, at 11:59 PM, jonnymo <[email protected] >> <mailto:[email protected]>> wrote: >> >> Which BeagleBoard do you have? >> What image is it running? >> What OS is running on the system you are tethered to? >> What steps did you perform for the FW upgrade? >> >> Cheer, >> >> Jon >> >> On Sun, Nov 22, 2020 at 4:38 AM <[email protected] >> <mailto:[email protected]>> wrote: >> With tether option, on first time boot up board can access to internet to >> upgrade firmware. when finish upgrade i can use tethered option access to >> the board with ip: 192.168.6.2 and using connmanctl connect to my wifi >> router but it cannot ping to 8.8.8.8 and another too. >> >> How can i fixed it? >> >> -- >> For more options, visit http://beagleboard.org/discuss >> <http://beagleboard.org/discuss> >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] >> <mailto:[email protected]>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/2f7bc1b1-876a-4789-8978-041adea50027o%40googlegroups.com >> >> <https://groups.google.com/d/msgid/beagleboard/2f7bc1b1-876a-4789-8978-041adea50027o%40googlegroups.com?utm_medium=email&utm_source=footer>. >> >> -- >> For more options, visit http://beagleboard.org/discuss >> <http://beagleboard.org/discuss> >> --- >> You received this message because you are subscribed to a topic in the >> Google Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/wIw6puVZH9w/unsubscribe >> <https://groups.google.com/d/topic/beagleboard/wIw6puVZH9w/unsubscribe>. >> To unsubscribe from this group and all its topics, send an email to >> [email protected] >> <mailto:[email protected]>. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/beagleboard/CAG99bkpDLsUW7QyP99GVsbhU69t-7kXVcyFDwPitUGO5F2sbqg%40mail.gmail.com >> >> <https://groups.google.com/d/msgid/beagleboard/CAG99bkpDLsUW7QyP99GVsbhU69t-7kXVcyFDwPitUGO5F2sbqg%40mail.gmail.com?utm_medium=email&utm_source=footer>. > > > -- > For more options, visit http://beagleboard.org/discuss > <http://beagleboard.org/discuss> > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/146F3FB1-8DDC-4943-A326-25496ED08946%40gmail.com > > <https://groups.google.com/d/msgid/beagleboard/146F3FB1-8DDC-4943-A326-25496ED08946%40gmail.com?utm_medium=email&utm_source=footer>. > > -- > For more options, visit http://beagleboard.org/discuss > <http://beagleboard.org/discuss> > --- > You received this message because you are subscribed to a topic in the Google > Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/wIw6puVZH9w/unsubscribe > <https://groups.google.com/d/topic/beagleboard/wIw6puVZH9w/unsubscribe>. > To unsubscribe from this group and all its topics, send an email to > [email protected] > <mailto:[email protected]>. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAG99bkrzG%2BzPHuY8VCG7sO%3DDPr20VjE0uPizOFUC-j6OqEQWRg%40mail.gmail.com > > <https://groups.google.com/d/msgid/beagleboard/CAG99bkrzG%2BzPHuY8VCG7sO%3DDPr20VjE0uPizOFUC-j6OqEQWRg%40mail.gmail.com?utm_medium=email&utm_source=footer>. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/2A2A2D7C-1135-4E03-AD8D-E6CBA78EDB7E%40gmail.com.
