You can, try to connect to UT0 with an FTDI cable and see if you can get any boot info from the board which might indicate what the issue is. Ex: https://elinux.org/EBC_Exercise_21a_Boot_Sequence https://github.com/beagleboard/beaglebone-blue/wiki/Pinouts
My Blue died in a similar manner with pretty much showing the same LED sequence. I have not been able to recover it, so an RMA I would suspect is your best option if you can get it. Cheers, Jon On Sat, Nov 7, 2020 at 6:39 AM Yash Vardhan Singh ee19m012 < [email protected]> wrote: > Thats the whole issue...i had plans to integrate airspeed sensor, mm wave > radar, GPS and Battery BMS on CAN. And i knew i need to power it through > battery for 5V required by GPS though i2c and UART work on 3.3 V even when > BBB is powered through USB. But before i could reach a point of > integration, this thing happened. Right i was just sorting out the > configuration to check sensors with 3.3 V which could be powered through > USB. > > On Saturday, November 7, 2020 at 8:00:42 PM UTC+5:30 [email protected] > wrote: > >> One thing is, what sensors have you connected to your Blue? If you have >> problems with consumption, on USB ports beagle will not boot. >> >> Em sáb., 7 de nov. de 2020 às 10:35, Yash Vardhan Singh ee19m012 < >> [email protected]> escreveu: >> >>> Yeah I am >>> >>> On Sat, 7 Nov, 2020, 18:52 Vinicius Juvinski, <[email protected]> >>> wrote: >>> >>>> Hi >>>> >>>> Are you in the Gitter channel ? >>>> >>>> Join the chat in mirkix/BBBMINI >>>> >>>> https://gitter.im/mirkix/BBBMINI?utm_source=ios&utm_medium=link&utm_campaign=ios-share-link >>>> >>>> We can help better there >>>> >>>> Sent from my iPhone >>>> >>>> >>>> Em 7 de nov de 2020, à(s) 08:25, Yash Vardhan Singh ee19m012 < >>>> [email protected]> escreveu: >>>> >>>> >>>> I have Beagle Bone Blue running Ardu Pilot. I powered it through USB >>>> 2.0 and then 75% battery charging LED, power blue LED and Green and Red LED >>>> are simply on with no other LED on including wifi. Can anyone help with fix >>>> or resolution of the issue. I purchased it through authorised reseller >>>> Tanotis.....any option of RMA to get it repaired....less than 30 days old >>>> board. >>>> >>>> >>>> Thanks >>>> Yash >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/beagleboard/CAB1EmcX9Ei1PYSQaM8k3czJsZ_W4Moq7rBex5F8cQgAde92RWg%40mail.gmail.com >>>> <https://groups.google.com/d/msgid/beagleboard/CAB1EmcX9Ei1PYSQaM8k3czJsZ_W4Moq7rBex5F8cQgAde92RWg%40mail.gmail.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>>> -- >>>> For more options, visit http://beagleboard.org/discuss >>>> --- >>>> You received this message because you are subscribed to the Google >>>> Groups "BeagleBoard" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/beagleboard/5B6AFC74-32A0-47F6-AE84-B81F7BF5BF2D%40gmail.com >>>> <https://groups.google.com/d/msgid/beagleboard/5B6AFC74-32A0-47F6-AE84-B81F7BF5BF2D%40gmail.com?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/beagleboard/CAB1EmcUJZ0YJSpJ3ba%3DzuZZ1xrfQ7P-h1QxT-%3D_5mr%3DjUjQE1g%40mail.gmail.com >>> <https://groups.google.com/d/msgid/beagleboard/CAB1EmcUJZ0YJSpJ3ba%3DzuZZ1xrfQ7P-h1QxT-%3D_5mr%3DjUjQE1g%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/a07004b9-b034-42c0-bbb4-127720c4c70bn%40googlegroups.com > <https://groups.google.com/d/msgid/beagleboard/a07004b9-b034-42c0-bbb4-127720c4c70bn%40googlegroups.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAG99bkq-yfpYr1WLvOByapvZBe3Ok51wUZ8XzHfbaT%2BeDgn3qA%40mail.gmail.com.
