It turns out P9_19 and P9_20 default to i2c.  I changed the .dts file to 
set them to gpio and the display works on SPI0.

--Mark

On Tuesday, November 3, 2020 at 5:17:18 PM UTC-5 Mark A. Yoder wrote:

> I have an ADAFRUIT 3.4" LCD display that works on SPI1 using [1].  When 
> switching it to SPI0 and [2] I get the following error.
>
> [  +0.064441] omap2_mcspi 48030000.spi: chipselect 0 already in use
> [  +0.006268] spi_master spi0: spi_device register error 
> /ocp/spi@48030000/channel@0
> [  +0.007651] spi_master spi0: Failed to create SPI device for 
> /ocp/spi@48030000/channel@0
>
> Any ideas what's up?  The backlight works, but the LCD doesn't display 
> anything.
>
> [1] 
> https://github.com/beagleboard/bb.org-overlays/blob/master/src/arm/BB-LCD-ADAFRUIT-24-SPI1-00A0.dts
>
> [2] 
> https://github.com/beagleboard/bb.org-overlays/blob/master/src/arm/BB-LCD-ADAFRUIT-24-SPI0-00A0.dts
>
> sudo /opt/scripts/tools/version.sh 
> [sudo] password for debian: 
> git:/opt/scripts/:[ef16ffa8c27225005cc2b2c974a83da3dee6c1ef]
> eeprom:[A335BNLT0A5A1513BBBK3586]
> model:[TI_AM335x_BeagleBone_Black]
> dogtag:[BeagleBoard.org Debian Buster IoT Image 2020-08-31]
> bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot 
> 2019.04-00002-gc9b3922522]:[location: dd MBR]
> UBOOT: Booted Device-Tree:[am335x-boneblack-uboot-univ.dts]
> UBOOT: Loaded Overlay:[AM335X-PRU-RPROC-4-19-TI-00A0]
> UBOOT: Loaded Overlay:[BB-ADC-00A0]
> UBOOT: Loaded Overlay:[BB-BONE-eMMC1-01-00A0]
> UBOOT: Loaded Overlay:[BB-LCD-ADAFRUIT-24-SPI0-00A0]
> kernel:[4.19.94-ti-r50]
> nodejs:[v10.21.0]
> /boot/uEnv.txt Settings:
> uboot_overlay_options:[enable_uboot_overlays=1]
>
> uboot_overlay_options:[uboot_overlay_addr4=BB-LCD-ADAFRUIT-24-SPI0-00A0.dtbo]
> uboot_overlay_options:[disable_uboot_overlay_video=1]
>
> uboot_overlay_options:[uboot_overlay_pru=AM335X-PRU-RPROC-4-19-TI-00A0.dtbo]
> uboot_overlay_options:[enable_uboot_cape_universal=1]
> pkg check: to individually upgrade run: [sudo apt install --only-upgrade 
> <pkg>]
> pkg:[bb-cape-overlays]:[4.14.20200814.0-0~buster+20200814]
> pkg:[bb-wl18xx-firmware]:[1.20200813.1-0~buster+20200813]
> pkg:[kmod]:[26-1]
> pkg:[librobotcontrol]:[1.0.5-git20200715.0-0~buster+20200716]
> pkg:[firmware-ti-connectivity]:[20190717-2rcnee1~buster+20200305]
> groups:[debian : debian adm kmem dialout cdrom floppy audio dip video 
> plugdev users systemd-journal input bluetooth netdev i2c gpio admin spi iio 
> docker tisdk weston-launch xenomai cloud9ide pwm eqep remoteproc]
> cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 
> root=/dev/mmcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M 
> net.ifnames=0 lpj=1990656 rng_core.default_quality=100 quiet]
> dmesg | grep remote
> [   64.629243] remoteproc remoteproc0: wkup_m3 is available
> [   64.647970] remoteproc remoteproc0: powering up wkup_m3
> [   64.648005] remoteproc remoteproc0: Booting fw image 
> am335x-pm-firmware.elf, size 217168
> [   64.648293] remoteproc remoteproc0: remote processor wkup_m3 is now up
> [   66.850264] remoteproc remoteproc1: 4a334000.pru is available
> [   66.866379] remoteproc remoteproc2: 4a338000.pru is available
> dmesg | grep pru
> [   66.850264] remoteproc remoteproc1: 4a334000.pru is available
> [   66.851362] pru-rproc 4a334000.pru: PRU rproc node pru@4a334000 probed 
> successfully
> [   66.866379] remoteproc remoteproc2: 4a338000.pru is available
> [   66.866574] pru-rproc 4a338000.pru: PRU rproc node pru@4a338000 probed 
> successfully
> dmesg | grep pinctrl-single
> [    0.926234] pinctrl-single 44e10800.pinmux: 142 pins, size 568
> dmesg | grep gpio-of-helper
> [    0.939877] gpio-of-helper ocp:cape-universal: ready
> lsusb
> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> END
>

-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To view this discussion on the web visit 
https://groups.google.com/d/msgid/beagleboard/e19866fe-bae8-4aee-8c21-671b29f64d4an%40googlegroups.com.

Reply via email to