Here is the uBoot output before I do an 'apt upgrade' U-Boot SPL 2018.01-00002-g9aa111a004 (Jan 20 2018 - 12:45:29) Trying to boot from MMC2
U-Boot 2018.01-00002-g9aa111a004 (Jan 20 2018 - 12:45:29 -0600), Build: jenkins-github_Bootloader-Builder-32 CPU : AM335X-GP rev 2.1 I2C: ready DRAM: 512 MiB No match for driver 'omap_hsmmc' No match for driver 'omap_hsmmc' Some drivers were not found Reset Source: Global warm SW reset has occurred. Reset Source: Power-on reset has occurred. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 Using default environment Board: BeagleBone Black <ethaddr> not set. Validating first E-fuse MAC BeagleBone Black: BeagleBone: cape eeprom: i2c_probe: 0x54: BeagleBone: cape eeprom: i2c_probe: 0x55: BeagleBone: cape eeprom: i2c_probe: 0x56: BeagleBone: cape eeprom: i2c_probe: 0x57: Net: eth0: MII MODE cpsw, usb_ether Press SPACE to abort autoboot in 2 seconds board_name=[A335BNLT] ... board_rev=[00C0] ... Card did not respond to voltage select! mmc_init: -95, time 12 Card did not respond to voltage select! mmc_init: -95, time 13 Card did not respond to voltage select! mmc_init: -95, time 13 gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 Card did not respond to voltage select! mmc_init: -95, time 13 Card did not respond to voltage select! mmc_init: -95, time 13 switch to partitions #0, OK mmc1(part 0) is current device Scanning mmc 1:1... gpio: pin 56 (gpio 56) value is 0 gpio: pin 55 (gpio 55) value is 0 gpio: pin 54 (gpio 54) value is 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc1(part 0) is current device gpio: pin 54 (gpio 54) value is 1 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 2295 bytes read in 15 ms (149.4 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-4.9.105-ti-r114 ... 9818560 bytes read in 638 ms (14.7 MiB/s) uboot_overlays: [uboot_base_dtb=am335x-boneblack-uboot.dtb] ... uboot_overlays: Switching too: dtb=am335x-boneblack-uboot.dtb ... loading /boot/dtbs/4.9.105-ti-r114/am335x-boneblack-uboot.dtb ... 61638 bytes read in 42 ms (1.4 MiB/s) uboot_overlays: [fdt_buffer=0x60000] ... uboot_overlays: loading /lib/firmware/BB-BONE-eMMC1-01-00A0.dtbo ... 1440 bytes read in 165 ms (7.8 KiB/s) uboot_overlays: loading /lib/firmware/BB-HDMI-TDA998x-00A0.dtbo ... 4896 bytes read in 58 ms (82 KiB/s) uboot_overlays: loading /lib/firmware/BB-ADC-00A0.dtbo ... 711 bytes read in 134 ms (4.9 KiB/s) uboot_overlays: loading /lib/firmware/univ-bbb-EVA-00A0.dtbo ... 62064 bytes read in 235 ms (257.8 KiB/s) loading /boot/initrd.img-4.9.105-ti-r114 ... 5801348 bytes read in 383 ms (14.4 MiB/s) debug: [console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1 root=/dev/mmcblk1p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0] ... debug: [bootz 0x82000000 0x88080000:588584 88000000] ... ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fa77000, end 8ffff584 ... OK reserving fdt memory region: addr=88000000 size=7e000 Loading Device Tree to 8f9f6000, end 8fa76fff ... OK Starting kernel ... -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/ceb4c778-4855-47f0-a5ac-1e8c63d16881o%40googlegroups.com.
