On Thu, Oct 1, 2020 at 5:59 AM 'Peter H' via BeagleBoard <[email protected]> wrote: > > Hi, > I have problem with flashing emmc . History: 5 year ago I make image of > running system and created "bootable" sd card with command: > dd if=/dev/mmcblk1 bs=16M | gzip -c > /mnt/BBB-eMMC-$RANDOM.img.gz > > Next 5 years I clone BB with this card successfuly. This year no. > Parts of log: > > ## Booting kernel from Legacy Image at 82000000 ... > Image Name: Linux-3.8.13 > Created: 2013-09-26 13:41:19 UTC > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 11748032 Bytes = 11.2 MiB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > ## Flattened Device Tree blob at 81ff0000 > Booting using the fdt blob at 0x81ff0000 > Loading Kernel Image ... OK > Loading Device Tree to 8fff6000, end 8ffff133 ... OK > > Starting kernel ... > > Uncompressing Linux... done, booting the kernel. > [ 0.813109] omap2_mbox_probe: platform not supported > [ 0.819635] tps65217-bl tps65217-bl: no platform data provided > [ 0.883036] bone-capemgr bone_capemgr.9: slot #0: No cape found > [ 0.920143] bone-capemgr bone_capemgr.9: slot #1: No cape found > [ 0.957252] bone-capemgr bone_capemgr.9: slot #2: No cape found > [ 0.994360] bone-capemgr bone_capemgr.9: slot #3: No cape found > [ 1.013254] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed > [ 1.074693] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested > by 44e10800.pinmux; cannot claim for gpio-leds.8 > [ 1.086361] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22 > [ 1.093643] pinctrl-single 44e10800.pinmux: could not request pin 21 on > device pinctrl-single > [ 1.188012] mmc1: unrecognised EXT_CSD revision 8 > [ 1.192973] mmc1: error -22 whilst initialising MMC card
Newer hardware need two patches on that old 3.8.x kernel: https://github.com/RobertCNelson/yakbuild/tree/master/patches/eMMC/3.8.x Regards, -- Robert Nelson https://rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAOCHtYjV3vjr%3Dh8c8y8bnq8tWHyYtaRh5%2BhtDv94dsqVUcPNsw%40mail.gmail.com.
