debian@beaglebone:~$ sudo /opt/scripts/tools/version.sh
[sudo] password for debian:
git:/opt/scripts/:[20c080bc91f243ef852a704758788a31083b0f9e]
eeprom:[A335BNLT00C05018BBBK1935]
model:[TI_AM335x_BeagleBone_Black]
dogtag:[BeagleBoard.org Debian Buster IoT Image 2020-04-06]
bootloader:[microSD-(push-button)]:[/dev/mmcblk0]:[U-Boot
2019.04-00002-g07d5700
e21]:[location: dd MBR]
bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot
2019.04-00002-g07d5700e21]:[l
ocation: dd MBR]
UBOOT: Booted Device-Tree:[am335x-boneblack-uboot-univ.dts]
UBOOT: Loaded Overlay:[AM335X-PRU-RPROC-4-19-TI-00A0]
UBOOT: Loaded Overlay:[BB-ADC-00A0]
UBOOT: Loaded Overlay:[BB-BONE-eMMC1-01-00A0]
UBOOT: Loaded Overlay:[BB-HDMI-TDA998x-00A0]
kernel:[4.19.94-ti-r42]
nodejs:[v10.15.2]
/boot/uEnv.txt Settings:
uboot_overlay_options:[enable_uboot_overlays=1]
uboot_overlay_options:[uboot_overlay_pru=/lib/firmware/AM335X-PRU-RPROC-4-19-TI-
00A0.dtbo]
uboot_overlay_options:[enable_uboot_cape_universal=1]
pkg check: to individually upgrade run: [sudo apt install --only-upgrade
<pkg>]
pkg:[bb-cape-overlays]:[4.14.20200403.0-0rcnee0~buster+20200403]
pkg:[bb-customizations]:[1.20200306.0-0rcnee0~buster+20200306]
pkg:[bb-usb-gadgets]:[1.20200322.0-0rcnee0~buster+20200322]
pkg:[bb-wl18xx-firmware]:[1.20200322.0-0rcnee0~buster+20200322]
pkg:[kmod]:[26-1]
pkg:[librobotcontrol]:[1.0.4-git20190227.1-0rcnee0~buster+20190327]
pkg:[firmware-ti-connectivity]:[20190717-2rcnee1~buster+20200305]
groups:[debian : debian adm kmem dialout cdrom floppy audio dip video
plugdev
us
ers systemd-journal bluetooth netdev i2c gpio pwm eqep remoteproc admin spi
iio
docker tisdk weston-launch xenomai cloud9ide]
cmdline:[console=ttyO0,115200n8 bone_capemgr.uboot_capemgr_enabled=1
root=/dev/m
mcblk0p1 ro rootfstype=ext4 rootwait coherent_pool=1M net.ifnames=0
lpj=1990656
rng_core.default_quality=100 quiet]
dmesg | grep remote
[ 59.195209] remoteproc remoteproc0: wkup_m3 is available
[ 59.263793] remoteproc remoteproc0: powering up wkup_m3
[ 59.263826] remoteproc remoteproc0: Booting fw image
am335x-pm-firmware.elf,
size 217168
[ 59.264144] remoteproc remoteproc0: remote processor wkup_m3 is now up
[ 63.162022] remoteproc remoteproc1: 4a334000.pru is available
[ 63.202649] remoteproc remoteproc2: 4a338000.pru is available
dmesg | grep pru
[ 63.162022] remoteproc remoteproc1: 4a334000.pru is available
[ 63.162185] pru-rproc 4a334000.pru: PRU rproc node pru@4a334000 probed
succes
sfully
[ 63.202649] remoteproc remoteproc2: 4a338000.pru is available
[ 63.202824] pru-rproc 4a338000.pru: PRU rproc node pru@4a338000 probed
succes
sfully
dmesg | grep pinctrl-single
dmesg | grep gpio-of-helper
lsusb
Bus 001 Device 036: ID 0bda:1a2b Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
END
debian@beaglebone:~$ lsusb
Bus 001 Device 037: ID 0bda:1a2b Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
debian@beaglebone:~$
On Monday, September 28, 2020 at 8:32:50 PM UTC+5:30 RobertCNelson wrote:
> On Mon, Sep 28, 2020 at 9:29 AM <[email protected]> wrote:
> >
> > I was trying to configure drivers for tenda W311MI wifi dongle with
> beaglebone black but it was a failure can anyone suggest me good tutorial
> on it
>
> That's a new one, please run:
>
> sudo /opt/scripts/tools/version.sh
>
> and
>
> lsusb
>
> Regards,
>
> --
> Robert Nelson
> https://rcn-ee.com/
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/beagleboard/6e9cf5bb-a1af-48e4-b67f-934582bfdcc9n%40googlegroups.com.
