Have you looked at these images? https://rcn-ee.net/rootfs/2020-04-09/flasher/
https://rcn-ee.net/rootfs/2020-04-09/elinux/ Cheers, Jon On Sun, Sep 20, 2020 at 5:55 AM Pieter Beneke <[email protected]> wrote: > Thanks everybody for your helpful suggestions. Lots of things in there > which I did not know, which are not directly available anywhere. I’m sure > I’ll find a solution in there somewhere. > > > > Regards > > > > *From:* [email protected] <[email protected]> *On > Behalf Of *jonnymo > *Sent:* 19 September 2020 06:40 PM > *To:* Beagle Board <[email protected]> > *Subject:* Re: [beagleboard] Re: Install Ubuntu using SD card and Windows > > > > If you are willing to reimage the Beaglebone, why not just download Etcher > on your Windows system and then burn a Beagleboard flasher image to an uSD > card and then boot the BBB with the flasher image to refresh the eMMC? > > > > Etcher Windows: > > https://www.balena.io/etcher/ > > > > Beagleboard images: > > https://beagleboard.org/latest-images > > > > If you have another Linux based board such as Raspberry Pi, you could try > to read the BB image on that using a uSD USB reader. > > > > The other option is to install a tool on your Windows system that allows > you to read the Linux filesystem and then edit any file you changed. I > suspect either /etc/resolv.conf' or your interfaces file. > > > https://www.howtogeek.com/112888/3-ways-to-access-your-linux-partitions-from-windows/ > > https://www.diskinternals.com/linux-reader/ > > > > > > Cheers, > > > > Jon > > > > On Sat, Sep 19, 2020 at 7:54 AM Gwen Stouthuysen < > [email protected]> wrote: > > As far as I am knowledgeable, the ip address of the debian image is > 192.168.7.2 > > 192.168.7.1 is the socket of the USB networking adapter at the Windows > side. > > > > The FTDI adapter is an option to look into the real boot process. > > But dont take it for granted, when i power the bbb from a USB power plug > it's baud rate is different . > > Who knows why? > > > > Gwen Stouthuysen > > > > Op za 19 sep. 2020 16:40 schreef Dennis Lee Bieber < > [email protected]>: > > On Sat, 19 Sep 2020 14:35:29 +0200, in gmane.comp.hardware.beagleboard.user > Pieter Beneke <[email protected]> wrote: > > > > > >Unless there is some other serial port I am not aware of? > > > > > > > >Unless there is some other serial port I am not aware of? > > The hardware console/debug port that is on the 6-pin header. You'll > need a 3.3V compatible FTDI adapter. > > > https://www.amazon.com/Converter-Terminated-Galileo-BeagleBone-Minnowboard/dp/B06ZYPLFNB > claims to be Beaglebone compatible -- others have loose leads, which allows > them to be used with devices having different pin-outs > > https://www.amazon.com/ADAFRUIT-Industries-954-Serial-Raspberry/dp/B00DJUHGHI/ref=rtpb_3?pd_rd_w=nxwqS&pf_rd_p=49740592-2805-416d-896c-b825ad91c2cf&pf_rd_r=9EW8MP06H9544B0KZ8PA&pd_rd_r=4088b22e-a62e-4a46-a474-bf2dcce33875&pd_rd_wg=00Qmu&pd_rd_i=B00DJUHGHI > > > -- > Dennis L Bieber > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/116cmfpsr9avgf7250krpjsus8905o2nnc%404ax.com > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAFfeaG-T9mRTybcHi0XQF6TnsLY7bdwVhZw4jzQ8EAUerX_crw%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAFfeaG-T9mRTybcHi0XQF6TnsLY7bdwVhZw4jzQ8EAUerX_crw%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/Zh9eAbZLWcg/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/CAG99bkrQDJ6vtm3VU9nNoxwoHiCChjKCVa-hS_gRTLE38mrw9Q%40mail.gmail.com > <https://groups.google.com/d/msgid/beagleboard/CAG99bkrQDJ6vtm3VU9nNoxwoHiCChjKCVa-hS_gRTLE38mrw9Q%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web visit > https://groups.google.com/d/msgid/beagleboard/00bb01d68f1c%240eefc860%242ccf5920%24%40gmail.com > <https://groups.google.com/d/msgid/beagleboard/00bb01d68f1c%240eefc860%242ccf5920%24%40gmail.com?utm_medium=email&utm_source=footer> > . > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/beagleboard/CAG99bkoQe-tGrrTjX4p1JTwd3N7iYRM7ohPq_xruRJgA92sa-w%40mail.gmail.com.
